Effect of temperature on the anisotropy of mechanical properties of predeformed carbon steel

1972 ◽  
Vol 4 (5) ◽  
pp. 598-600 ◽  
Author(s):  
B. I. Koval'chuk ◽  
A. A. Lebedev
Keyword(s):  
Mechanical Properties ◽  
Carbon Steel ◽  
Effect Of Temperature ◽  
Anisotropy Of Mechanical Properties

scholarly journals Effect of Temperature Scheme on Microstructure and Mechanical Properties during Medium Carbon Steel Warm Processing

Metals ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 77
Author(s):  
Hong-Bin Li ◽  
Lifeng Fan ◽  
Lian-Sheng Chen
Keyword(s):  
Mechanical Properties ◽  
Carbon Steel ◽  
Warm Rolling ◽  
Medium Carbon Steel ◽  
Effect Of Temperature ◽  
Warm Deformation ◽  
Homogeneous Microstructure ◽  
Medium Carbon ◽  
Gleeble 3500 ◽  
Strength And Ductility

Influence of temperature scheme on the microstructure and properties variation of medium carbon steel warm deformation was studied with testing equipment of Gleeble-3500, SEM, TEM, EBSD, and φ350 reversal rolling mill. The results show that the temperature of 650 facilitates the formation of ultrafine homogeneous microstructure. The microstructure formed during temperature range of 650–700 °C is relative homogeneous and fine. The mechanical properties of warm rolling are influenced by the cooling modes. The lower cooling rate is benefit to the combination of strength and ductility.

INFLUENCE THE QUENCHING AND TEMPERING ON THE MICROSTRUCTURE, MECHANICAL PROPERTIES AND SURFACE ROUGHNESS, OF MEDIUM CARBON STEEL

2018 ◽  
Vol 18 (1) ◽  
pp. 125-135
Author(s):  
Sattar H A Alfatlawi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Surface Roughness ◽  
Carbon Steel ◽  
Cold Water ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Heating And Cooling ◽  
Treatment Processes ◽  
Quenching And Tempering

One of ways to improve properties of materials without changing the product shape toobtain the desired engineering applications is heating and cooling under effect of controlledsequence of heat treatment. The main aim of this study was to investigate the effect ofheating and cooling on the surface roughness, microstructure and some selected propertiessuch as the hardness and impact strength of Medium Carbon Steel which treated at differenttypes of heat treatment processes. Heat treatment achieved in this work was respectively,heating, quenching and tempering. The specimens were heated to 850°C and left for 45minutes inside the furnace as a holding time at that temperature, then quenching process wasperformed in four types of quenching media (still air, cold water (2°C), oil and polymersolution), respectively. Thereafter, the samples were tempered at 200°C, 400°C, and 600°Cwith one hour as a soaking time for each temperature, then were all cooled by still air. Whenthe heat treatment process was completed, the surface roughness, hardness, impact strengthand microstructure tests were performed. The results showed a change and clearimprovement of surface roughness, mechanical properties and microstructure afterquenching was achieved, as well as the change that took place due to the increasingtoughness and ductility by reducing of brittleness of samples.

Effect of nickel on formation of transition layer during liquid-phase aluminizing of titanium

2020 ◽  
pp. 313-317
Author(s):  
A.I. Kovtunov ◽  
Yu.Yu. Khokhlov ◽  
S.V. Myamin
Keyword(s):  
Mechanical Properties ◽  
Liquid Phase ◽  
Intermetallic Layer ◽  
Reaction Diffusion ◽  
Strength Properties ◽  
Effect Of Temperature ◽  
Nickel Concentration ◽  
Aluminum Melt ◽  
Titanium Aluminum ◽  
Titanium Foam

Titanium—aluminum, titanium—foam aluminum composites and bimetals obtained by liquid-phase methods, are increasingly used in industry. At the liquid-phase methods as result of the reaction diffusion of titanium and aluminum is formed transitional intermetallic layer at the phase boundary of the composite, which reduces the mechanical properties of titanium and composite. To reduce the growth rate of the intermetallic layer between the layers of the composite and increase its mechanical properties, it is proposed to alloy aluminum melt with nickel. The studies of the interaction of titanium and molten aluminum alloyed with nickel made it possible to establish the effect of temperature and aluminizing time on the thickness, chemical and phase compositions of the transition intermetallic layer. The tests showed the effect of the temperature of the aluminum melt, the nickel concentration on the strength properties of titanium—aluminum bimetal.

Sign in / Sign up

Export Citation Format

Share Document