Equation of state of the material of nozzle guide blades for gas turbine engines in heat cycling in a sulfur containing medium

1986 ◽  
Vol 18 (12) ◽  
pp. 1582-1588
Author(s):  
B. D. Kosov ◽  
G. N. Tret'yachenko
Keyword(s):  
Equation Of State ◽  
Gas Turbine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Heat Cycling ◽  
Nozzle Guide ◽  
Sulfur Containing

Effects of Turbine Atmospheres on Sulfidation Corrosion

1967 ◽  
Author(s):  
M. J. Donachie ◽  
E. F. Bradley ◽  
R. A. Sprague ◽  
F. P. Talboom
Keyword(s):  
Gas Turbine ◽  
Experimental Evaluation ◽  
Laboratory Testing ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Considerable Effort ◽  
Testing Procedures ◽  
Sulfur Containing

Special problems are encountered in the use of gas turbine engines in salt atmospheres. Ingestion of salt in the presence of sulfur-containing fuels can cause sulfidation corrosion, and considerable effort has been devoted to the theoretical and experimental evaluation of this process. The authors’ company pioneered the development of laboratory testing procedures by which it became possible to study the sulfidation behavior of alloys. This paper reviews these studies, describing the apparatus, the tests, and their various effects.

Film Cooling Performance of Tripod Holes on the Endwall Upstream of a First Stage Nozzle Guide Vane

2015 ◽  
Author(s):  
Bharath Viswanath Ravi ◽  
Samruddhi Deshpande ◽  
Sridharan Ramesh ◽  
Prethive Dhilip Dhilipkumar ◽  
Srinath Ekkad
Keyword(s):  
Gas Turbine ◽  
Mass Flow ◽  
Film Cooling ◽  
Guide Vane ◽  
Turbine Engines ◽  
Inlet Temperature ◽  
Gas Turbine Engines ◽  
Film Cooling Effectiveness ◽  
The Difference ◽  
Nozzle Guide

In view of the growing energy demand, there is an increasing need to augment the thermal efficiency of gas turbine engines. The thermal efficiency and power output of gas turbine engines increase with increasing overall pressure ratio which in turn leads to an increase in turbine inlet temperature. The maximum permissible turbine inlet temperature is limited by the material strength of the components of the gas turbine engines. In this regard, it is important to ensure that the endwalls of the first stage nozzle guide vane, which is one of the critical regions, are adequately cooled. The cooling of the endwall is of particular interest because the leading edge region along the endwall of the stator vane experiences high heat transfer rates resulting from formation of horseshoe vortices. In this paper, the performance of upstream purge slot has been compared against discrete film cooling holes. Three different cooling configurations — slot, cylindrical holes and tripod holes have been investigated by comparing the adiabatic film cooling effectiveness. Furthermore, the effect of coolant to mainstream mass flow ratio on the effectiveness of the different cooling schemes has also been studied. The steady-state experiments were conducted in a low speed, linear cascade wind tunnel. Spatially resolved temperature data was captured using infrared thermography technique to compute adiabatic film cooling effectiveness. Amongst the configurations studied, slot ejection offered the best cooling performance at all mass flow ratios. The performance of tripod ejection was comparable to slot ejection at mass flow ratios between 0.5 and 1.5, with the difference in laterally averaged effectiveness being ∼5%. However, at the highest mass flow ratio (MFR=2.5), the difference increased to ∼20%. Low effectiveness values were observed downstream of cylindrical ejection which could be attributed to jet lift-off.

Gas Screen in Components of Gas Turbine Engines

1997 ◽  
Vol 28 (7-8) ◽  
pp. 536-542
Author(s):  
A. A. Khalatov ◽  
I. S. Varganov
Keyword(s):  
Gas Turbine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Gas Screen

Potential Application of Composite Materials to Future Gas Turbine Engines

1988 ◽  
Author(s):  
James C. Birdsall ◽  
William J. Davies ◽  
Richard Dixon ◽  
Matthew J. Ivary ◽  
Gary A. Wigell
Keyword(s):  
Composite Materials ◽  
Gas Turbine ◽  
Potential Application ◽  
Turbine Engines ◽  
Gas Turbine Engines

Method of tribodiagnostics of d-30KU engines/KP with the use of a microwave plasma complex: results of metrological examination and analysis of the accuracy

2020 ◽  
pp. 22-29
Author(s):  
A. Bogoyavlenskiy ◽  
A. Bokov
Keyword(s):  
Gas Turbine ◽  
Microwave Plasma ◽  
Technical Condition ◽  
The State ◽  
Turbine Engines ◽  
Metrological Examination ◽  
Gas Turbine Engines ◽  
High Frequency Plasma ◽  
Frequency Plasma ◽  
Primary Standards

The article contains the results of the metrological examination and research of the accuracy indicators of a method for diagnosing aircraft gas turbine engines of the D30KU/KP family using an ultra-high-frequency plasma complex. The results of metrological examination of a complete set of regulatory documents related to the diagnostic methodology, and an analysis of the state of metrological support are provided as well. During the metrological examination, the traceability of a measuring instrument (diagnostics) – an ultrahigh-frequency plasma complex – is evaluated based on the scintillation analyzer SAM-DT-01–2. To achieve that, local verification schemes from the state primary standards of the corresponding types of measurements were built. The implementation of measures to eliminate inconsistencies identified during metrological examination allows to reduce to an acceptable level the metrological risks of adverse situations when carrying out aviation activities in industry and air transportation. In addition, the probability of occurrence of errors of the first and second kind in the technological processes of tribodiagnostics of aviation gas turbine engines is reduced when implementing a method that has passed metrological examination in real practice. At the same time, the error in determining ratings and wear indicators provides acceptable accuracy indicators and sufficient reliability in assessing the technical condition of friction units of the D-30KP/KP2/KU/KU-154 aircraft engines.

On the prospects of application of nanostructured heterophase polyfunctional composite materials inengine building industry

2019 ◽  
pp. 50-57
Author(s):  
O. B. Silchenko ◽  
M. V. Siluyanova ◽  
V. Е. Nizovtsev ◽  
D. A. Klimov ◽  
A. A. Kornilov
Keyword(s):  
Composite Materials ◽  
Gas Turbine ◽  
Developed Countries ◽  
The United States ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Nanostructured Composite ◽  
Polymer Metal ◽  
Long Operation ◽  
Prospects Of Application

The paper gives a brief review of properties and applications of developed extra-hard nanostructured composite materials and coatings based on them. The presentresearch suggestsaerospace applications of nanostructured composite materials based on carbides, carbonitrides and diboridesof transition and refractory metals. To improve the technical and economic performance of gas turbine engines, it is advisable to use new composite structural materials whose basic physicomechanical properties are several times superior to traditional ones. The greatest progress in developing new composites should be expected in the area of materials created on the basis of polymer, metal, intermetallic and ceramic matrices. Currently components and assemblies of gas turbine engines and multiple lighting power units with long operation life and durability will vigorously develop. Next-generation composites are studied in all developed countries, primarily in the United States and Japan.

scholarly journals Progress in Novel Electrodeposited Bond Coats for Thermal Barrier Coating Systems

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4214
Author(s):  
Kranthi Kumar Maniam ◽  
Shiladitya Paul
Keyword(s):  
Gas Turbine ◽  
Thermal Barrier Coating ◽  
Gas Turbines ◽  
High Performance ◽  
Turbine Engines ◽  
Thermal Barrier ◽  
Gas Turbine Engines ◽  
Potential Cost ◽  
Bond Coats ◽  
Barrier Coating

The increased demand for high performance gas turbine engines has resulted in a continuous search for new base materials and coatings. With the significant developments in nickel-based superalloys, the quest for developments related to thermal barrier coating (TBC) systems is increasing rapidly and is considered a key area of research. Of key importance are the processing routes that can provide the required coating properties when applied on engine components with complex shapes, such as turbine vanes, blades, etc. Despite significant research and development in the coating systems, the scope of electrodeposition as a potential alternative to the conventional methods of producing bond coats has only been realised to a limited extent. Additionally, their effectiveness in prolonging the alloys’ lifetime is not well understood. This review summarises the work on electrodeposition as a coating development method for application in high temperature alloys for gas turbine engines and discusses the progress in the coatings that combine electrodeposition and other processes to achieve desired bond coats. The overall aim of this review is to emphasise the role of electrodeposition as a potential cost-effective alternative to produce bond coats. Besides, the developments in the electrodeposition of aluminium from ionic liquids for potential applications in gas turbines and the nuclear sector, as well as cost considerations and future challenges, are reviewed with the crucial raw materials’ current and future savings scenarios in mind.

Sign in / Sign up

Export Citation Format

Share Document