Laser light emission from interacting chaotic fields

1973 ◽  
Vol 265 (2) ◽  
pp. 105-118 ◽  
Author(s):  
H. Haken
Keyword(s):  
Laser Light ◽  
Light Emission

scholarly journals An analysis of the accelerations of a projectile in a gun tube by direct measurements and telemetry of the data

2018 ◽  
Vol 19 (4) ◽  
pp. 406 ◽  
Author(s):  
Mathilda Liennard ◽  
Ophélie Chevalier ◽  
André Langlet ◽  
Yann Guilmard ◽  
Marcel Mansion
Keyword(s):  
Numerical Simulation ◽  
Laser Light ◽  
Light Emission ◽  
Internal Ballistic ◽  
Direct Measurements ◽  
Tube Geometry

In this study, transverse and longitudinal accelerations of a full caliber-shell shot by a medium-caliber gun were measured directly during the internal ballistic (IB) phase. The data were transmitted outside the tube by modulation of LASER light emission and recoded into acceleration values. The results were analyzed through the numerical simulation of the response of the tube traversed by the projectile and with the internal-ballistic data providing the longitudinal projectile acceleration. The analysis reveals that the in-bore projectile movements are both influenced by the tube geometry (curvature and straightness defects) and by the tube response during the internal ballistic phase. However, in this work, the tube response appeared to be of greater influence on the projectile dynamics than the tube initial static geometry. Results provide basis for further calibration studies.

scholarly journals Response of laser-localized structures to external perturbations in coupled semiconductor microcavities

2014 ◽  
Vol 372 (2027) ◽  
pp. 20140004 ◽  
Author(s):  
M. Turconi ◽  
M. Giudici ◽  
S. Barland
Keyword(s):  
Semiconductor Lasers ◽  
Laser Light ◽  
Light Emission ◽  
Localized States ◽  
Time Resolved ◽  
External Perturbations ◽  
Localized Structures ◽  
Coupled Lasers ◽  
The Stability

Laser-localized structures have been observed in several experiments based on broad-area semiconductor lasers. They appear as bounded regions of laser light emission which can exist independently of each other and are expected to be commuted via external optical perturbations. In this work, we perform a statistical analysis of time-resolved commutation experiments in a system of coupled lasers and show the role of wavelength, polarization and pulse energy in the switching process. Furthermore, we also analyse the response of the system outside of the stability region of laser-localized states in search of an excitable response. We observe not only a threshold separating two types of responses, but also a strong variability in the system's trajectory when returning to the initial stable fixed point.

Microspherical resonators for multicolor laser light emission

SPIE Newsroom ◽  
2016 ◽  
Author(s):  
Daniele Farnesi ◽  
Andrea Barucci ◽  
Simone Berneschi ◽  
Giancarlo C. Righini ◽  
Gualtiero Nunzi Conti ◽  
...  
Keyword(s):  
Laser Light ◽  
Light Emission

Renilla Bioluminescence: A Morphologic Approach to the Location of Photocytes

1974 ◽  
Vol 32 ◽  
pp. 208-209
Author(s):  
Ben O. Spurlock ◽  
Milton J. Cormier
Keyword(s):  
Excited State ◽  
Ground State ◽  
Molecular Basis ◽  
Light Emission ◽  
Chemical Basis ◽  
Electronic Excited State ◽  
Colonial Form ◽  
The Common ◽  
Eighteenth And Nineteenth Centuries ◽  
Catalyzed Oxidation

The phenomenon of bioluminescence has fascinated layman and scientist alike for many centuries. During the eighteenth and nineteenth centuries a number of observations were reported on the physiology of bioluminescence in Renilla, the common sea pansy. More recently biochemists have directed their attention to the molecular basis of luminosity in this colonial form. These studies have centered primarily on defining the chemical basis for bioluminescence and its control. It is now established that bioluminescence in Renilla arises due to the luciferase-catalyzed oxidation of luciferin. This results in the creation of a product (oxyluciferin) in an electronic excited state. The transition of oxyluciferin from its excited state to the ground state leads to light emission.

Chronic Laser Exposure Effects on Rabbit Retina

1972 ◽  
Vol 30 ◽  
pp. 54-55
Author(s):  
Burton B. Silver ◽  
Theodore Lawwill
Keyword(s):  
Laser Irradiation ◽  
Laser Light ◽  
Broad Band ◽  
Argon Laser ◽  
Atropine Sulfate ◽  
Ultrastructural Changes ◽  
Laser Exposure ◽  
Rabbit Retina ◽  
Histological Changes ◽  
Threshold Doses

Dutch-belted 1 to 2.5 kg anesthetized rabbits were exposed to either xenon or argon laser light administered in a broad band, designed to cover large areas of the retina. For laser exposure, the pupil was dilated with atropine sulfate 1% and pheny lephrine 10%. All of the laser generated power was within a band centered at 5145.0 Anstroms. Established threshold for 4 hour exposures to laser irradiation are in the order of 25-35 microwatts/cm2. Animals examined for ultrastructural changes received 4 hour threshold doses. These animals exhibited ERG, opthalmascopic, and histological changes consistent with threshold damage.One month following exposure the rabbits were killed with pentobarbitol. The eyes were immediately enucleated and dissected while bathed in 3% phosphate buffered gluteraldehyde.

Estimation of the noise in TEM image recorded on “imaging plate”

1987 ◽  
Vol 45 ◽  
pp. 748-749
Author(s):  
T. Oikawa ◽  
N. Mori ◽  
T. Katoh ◽  
Y. Harada ◽  
J. Miyahara ◽  
...  
Keyword(s):  
Low Dose ◽  
Quantum Noise ◽  
Laser Light ◽  
Imaging Plate ◽  
Total System ◽  
Electron Dose ◽  
X Ray ◽  
Image Recording ◽  
Recording Material ◽  
Highly Sensitive

The “Imaging Plate”(IP) is a highly sensitive image recording plate for X-ray radiography. It has been ascertained that the IP has superior properties and high practicability as an image recording material in a TEM. The sensitivity, one of the properties, is about 3 orders higher than that of conventional photo film. The IP is expected to be applied to low dose techniques. In this paper, an estimation of the quantum noise on the TEM image which appears in case of low electron dose on the IP is reported.In this experiment, the JEM-2000FX TEM and an IP having the same size as photo film were used.Figure 1 shows the schematic diagram of the total system including the TEM used in this experiment. In the reader, He-Ne laser light is scanned across the IP, then blue light is emitted from the IP.

Scanning luminescence x-ray microscopy: Progress toward selective staining using microspheres

1994 ◽  
Vol 52 ◽  
pp. 74-75
Author(s):  
C. Jacobsen ◽  
J. Fu ◽  
S. Mayer ◽  
Y. Wang ◽  
S. Williams
Keyword(s):  
Visible Light ◽  
Active Sites ◽  
Light Emission ◽  
Chinese Hamster ◽  
Polystyrene Spheres ◽  
Good Resistance ◽  
X Ray ◽  
Selective Staining ◽  
Visible Light Emission ◽  
Specific Labelling

In scanning luminescence x-ray microscopy (SLXM), a high resolution x-ray probe is used to excite visible light emission (see Figs. 1 and 2). The technique has been developed with a goal of localizing dye-tagged biochemically active sites and structures at 50 nm resolution in thick, hydrated biological specimens. Following our initial efforts, Moronne et al. have begun to develop probes based on biotinylated terbium; we report here our progress towards using microspheres for tagging.Our initial experiments with microspheres were based on commercially-available carboxyl latex spheres which emitted ~ 5 visible light photons per x-ray absorbed, and which showed good resistance to bleaching under x-ray irradiation. Other work (such as that by Guo et al.) has shown that such spheres can be used for a variety of specific labelling applications. Our first efforts have been aimed at labelling ƒ actin in Chinese hamster ovarian (CHO) cells. By using a detergent/fixative protocol to load spheres into cells with permeabilized membranes and preserved morphology, we have succeeded in using commercial dye-loaded, spreptavidin-coated 0.03μm polystyrene spheres linked to biotin phalloidon to label f actin (see Fig. 3).

Sign in / Sign up

Export Citation Format

Share Document