Influence of the fiber volume fraction and the fiber Weibull modul on the behavior of 2D woven SiC/SiC ? a finite element simulation

2001 ◽  
Vol 149 (1-4) ◽  
pp. 41-54 ◽  
Author(s):  
H. Ismar ◽  
F. Schr�ter ◽  
F. Streicher
Keyword(s):  
Finite Element ◽  
Finite Element Simulation ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Fiber Volume ◽  
Element Simulation

The Effects of Layer-by-Layer Thickness and Fiber Volume Fraction Variation on the Mechanical Performance of a Pressure Vessel

2018 ◽  
Author(s):  
Emre Özaslan ◽  
Ali Yetgin ◽  
Volkan Coşkun ◽  
Bülent Acar ◽  
Tarık Olğar
Keyword(s):  
Finite Element ◽  
Layer Thickness ◽  
Pressure Vessel ◽  
Fiber Volume Fraction ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
Element Model ◽  
Layer By Layer ◽  
Fiber Volume ◽  
Filament Wound

Due to high stiffness/weight ratio, composite materials are widely used in aerospace applications such as motor case of rockets which can be regarded as a pressure vessel. The most commonly used method to manufacture the pressure vessels is the wet filament winding. However, the mechanical performance of a filament wound pressure vessel directly depends on the manufacturing process, manufacturing site environmental condition and material properties of matrix and fiber. The designed ideal pressure vessel may not be manufactured because of the mentioned issues. Therefore, manufacturing of filament wound composite structures are based on manufacturing experience and experiment. In this study, the effect of layer-by-layer thickness and fiber volume fraction variation due to manufacturing process on the mechanical performance was investigated for filament wound pressure vessel with unequal dome openings. First, the finite element model was created for designed thickness dimensions and constant material properties for all layers. Then, the model was updated. The updated finite element model considered the layer-by-layer thickness and fiber volume fraction variation. Effects of the thickness and fiber volume fraction on the stress distribution along the motor axial direction were shown. Also hydrostatic pressurization test was performed to verify finite element analysis in terms of fiber direction strain through the motor case outer surface. Important aspects of analyzing a filament wound pressure vessel were addressed for designers.

The Effects of Layer-by-Layer Thickness and Fiber Volume Fraction Variation on the Mechanical Performance of a Pressure Vessel

2020 ◽  
Vol 142 (4) ◽  
Author(s):  
Emre Özaslan ◽  
Ali Yetgin ◽  
Bülent Acar ◽  
Volkan Coşkun ◽  
Tarık Olğar
Keyword(s):  
Finite Element ◽  
Pressure Vessel ◽  
Material Properties ◽  
Fiber Volume Fraction ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
Element Model ◽  
Layer By Layer ◽  
Fiber Volume ◽  
Filament Wound

Abstract Due to high stiffness/weight ratio, composite materials are widely used in aerospace applications such as motor case of rockets which can be regarded as a pressure vessel. The most commonly used method to manufacture pressure vessels is the wet filament winding. However, the mechanical performance of a filament wound pressure vessel directly depends on the manufacturing process, manufacturing site environmental condition, and material properties of matrix and fiber. The designed pressure vessel may not be manufactured because of the mentioned issues. Therefore, manufacturing of filament wound composite structures are based on manufacturing experience and experiment. In this study, effects of layer-by-layer thickness and fiber volume fraction variation due to manufacturing process on the mechanical performance were investigated for filament wound pressure vessel with unequal dome openings. First, the finite element model was created for designed thickness dimensions and constant material properties for all layers. Then, the model was updated. The updated finite element model considered the thickness of each layer separately and variation of fiber volume fraction between the layers. Effects of the thickness and fiber volume fraction on the stress distribution along the motor axial direction were shown. Also hydrostatic pressurization tests were performed to verify finite element analysis in terms of fiber direction strain through the motor case outer surface. Important aspects of analyzing a filament wound pressure vessel were addressed for designers.

Experimental and Analytical Study on the Mechanical Behavior of Stitched Sandwich Composite Panel with a Foam Core

2008 ◽  
Vol 33-37 ◽  
pp. 477-482 ◽  
Author(s):  
Xi Tao Zheng ◽  
Jian Feng Zhang ◽  
Fan Yang ◽  
Ya Nan Chai ◽  
Ye Li
Keyword(s):  
Finite Element ◽  
Mechanical Behavior ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Sandwich Composite ◽  
Composite Panels ◽  
Foam Core ◽  
Compression Tests ◽  
Fiber Volume ◽  
Yarn Diameter

To quantify the effect of structural through-thickness reinforcement in foam core sandwich composite panels, an experimental study was carried out which included three-point bending tests, core shear tests, flatwise tensile and compression tests, as well as edgewise compression tests. Standard test procedures based on ASTM guidelines are followed to test the behavior of the stitched panels with reinforcement at 90 degree orientation with respect to the sandwich faces. The test specimens were manufactured by using polyurethane foam Rohacell 71 IG and carbon fiber reinforced composite facesheets. The dry perform facesheets and foam core were then assembled in a dry lay-up already stitched. Kevlar 29 yarn was used to stitch both sets of panels. The results showed a significant effect of the stitching on the in-plane Young’s modulus which was attributed to local displacements of the in-plane fibers and changes in the fiber volume fraction. Stitching of sandwich panels significantly increases the maximum failure loads under flexure, core shear, flatwise tensile, flatwise compression, and edgewise compression loading. A finite element based unit-cell model was developed to estimate the elastic constants of structurally stitched foam core sandwich composite panels taking into consideration the yarn diameter, the stitching pattern and direction as well as the load direction. Depending on these parameters, local changes of the fiber volume fraction as well as regions with undisturbed and disturbed fiber orientations within the laminate plies are taken into account. A good match between the finite element modeling and the experimental data was obtained. The present work should be considered as a step towards developing a more sophisticated numerical model capable of describing mechanical behavior of sandwich structures.

Local Approach of Fracture in the Ductile Regime and Application to VVER Materials

2002 ◽  
Author(s):  
B. Z. Margolin ◽  
V. I. Kostylev ◽  
E. Keim ◽  
R. Chaouadi
Keyword(s):  
Finite Element ◽  
Crack Resistance ◽  
Ductile Fracture ◽  
Finite Element Simulation ◽  
Volume Fraction ◽  
Stress Triaxiality ◽  
Local Approach ◽  
Gurson Model ◽  
Element Simulation

Within the TACIS R2.06/96 project: “Surveillance Program for VVER 1000 Reactors”, sponsored by the European Commission, the local approach of fracture has been applied in the ductile regime. Two different models were applied and compared, namely Tvergaard-Needleman-Gurson versus Prometey model. The main tasks are: • perform special Local Approach experiments on smooth and notched cylindrical specimens; • predict JR-curve on the basis of the ductile fracture models; • compare two models of ductile fracture, namely, the Tvergaard-Needleman-Gurson model and the Prometey model. In this paper, the Tvergaard-Needleman-Gurson and Prometey models are briefly described. The parameters of both models were calibrated by using experimental data obtained on tensile specimens. While only smooth tensile specimens are used to calibrate the Tvergaard-Needleman-Gurson model, notched tensile in addition to smooth tensile specimens are used to calibrate the Prometey model. In the latter, standard smooth tensile specimens are used to determine the mechanical properties (the yield stress σy, the ultimate stress σu, the ultimate elongation δu, the area reduction Z) and notched cylindrical specimens to determine the strain at rupture. The numerical analysis comprises essentially two steps: • Step 1: finite element simulation of the smooth tensile specimen (determination of true stress-strain curve and critical void volume fraction for the Tvergaard-Needleman-Gurson model) and simulation of the notched cylindrical specimen up to rupture (determination of stress triaxiality for the Prometey model); • Step 2: finite element simulation of the 2T CT specimen and determination of the crack resistance behaviour in the ductile regime (J-Δa curve). It is found that both models were able to correctly predict the crack resistance behaviour of the investigated materials. The numerical and the experimental results were in very good agreement. The main difference between the two models is that the required number of calibrated parameters in the Prometey model is less than in the Tvergaard-Needleman-Gurson model but additional tests on notched specimens are required for the Prometey model.

Finite Element Analysis of Interfacial Debonding Damage in Fiber-Reinforced Ceramic Matrix Composites

2007 ◽  
Vol 546-549 ◽  
pp. 1555-1558
Author(s):  
Chun Jun Liu ◽  
Yue Zhang ◽  
Da Hai Zhang ◽  
Zhong Ping Li
Keyword(s):  
Finite Element ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Interfacial Debonding ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Element Analysis

In this paper the composite fracture process has been simulated via the finite element method. A micromechanics model was developed to predict the stress-strain response of a SiO2f/ SiO2 composite explicitly accounting for the local damage mechanisms such as fiber fracture and interfacial debonding. The effects of interfacial strength and fiber volume fraction on the toughness of fiber-reinforced ceramic matrix composites were investigated. The results showed that the composite failure behaviors correlated with the interface strength, which could achieve an optimum value for the elevation of the composite toughness. The increase of fiber volume fraction can make more toughening contributions.

scholarly journals Finite Element Simulation Study of Ultrasonic Vibration-Assisted Tensile High-Volume Fraction SiCp/Al Composite

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3841 ◽  
Author(s):  
Zhang ◽  
Xiang ◽  
Wu ◽  
Feng ◽  
Shi ◽  
...  
Keyword(s):  
Finite Element ◽  
Tensile Strength ◽  
Finite Element Simulation ◽  
Ultrasonic Vibration ◽  
Stress Reduction ◽  
Volume Fraction ◽  
Aluminum Matrix ◽  
High Volume ◽  
Experimental Results ◽  
Element Simulation

Silicon carbide particle-reinforced aluminum matrix composite (SiCp/Al) has been widely used in the military and aerospace industry due to its special performance; however, there remain many problems in the processing. The present paper introduces an ultrasonic vibration tensile apparatus and a composite tensile specimen and performs Abaqus finite element simulation on high-volume SiCp/Al. The results show that the stress-strain curve increases linearly during conventional tensile strength; the intermittent vibration tensile strength is similar to the full course vibration tensile strength: The magnitude of the stress reduction increases as the amplitude of the ultrasound increases and the vibration frequency increases. The tensile rate is inversely proportional to the magnitude of the stress reduction, and in the ultrasonic parameters, the amplitude has the greatest influence on the magnitude of the stress reduction, followed by the tensile rate; additionally, the frequency has the least influence on the magnitude of the stress reduction. The experimental results show that the simulation results are consistent with the experimental results.

Parametric Generation of Random Distribution of Fibers in Long-Fiber Reinforced Composites and Micromechanical FE Analysis

2010 ◽  
Vol 452-453 ◽  
pp. 117-120
Author(s):  
Zhen Qing Wang ◽  
Xiao Qiang Wang ◽  
Ji Feng Zhang ◽  
Song Zhou
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Fiber Volume Fraction ◽  
Random Distribution ◽  
Volume Fraction ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Parametric Generation ◽  
High Fiber ◽  
Damage Initiation

A method for the parametric generation of the transversal cross-section microstructure model of unidirectional long-fiber reinforced composite (LFRC) is presented in this paper. Meanwhile, both the random distribution of the fibers and high fiber volume fraction are considered in the algorithm. The fiber distribution in the cross-section is generated through random movements of the fibers from their initial regular square arrangement. Furthermore, cohesive zone element is introduced into modeling the interphase between the fiber and the matrix. All these processes are carried out by the secondary development of the finite element codes (ABAQUS) via Python language programming. Based on the model generated, micromechanical finite element analysis (FEA) is performed to predict the damage initiation and subsequent evolution of the composites. The results show that this technique is capable of capturing the random distribution nature of these composites even for high fiber volume fraction. Moreover, the results prove that a good agreement with the experimental results is found.

Effect of Nanocomposite Microstructure on Stochastic Elastic Properties: An Finite Element Analysis Study

2019 ◽  
Vol 5 (3) ◽  
Author(s):  
Seyed Hamid Reza Sanei ◽  
Randall Doles ◽  
Tyler Ekaitis
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Elastic Properties ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Microstructural Feature ◽  
Stochastic Response ◽  
Fiber Volume ◽  
Element Analysis ◽  
Analysis Study

This paper addresses the effect of microstructure uncertainties on elastic properties of nanocomposites using finite element analysis (FEA) simulations. Computer-simulated microstructures were generated to reflect the variability observed in nanocomposite microstructures. The effect of waviness, agglomeration, and orientation of carbon nanotubes (CNTs) were investigated. Generated microstructures were converted to image-based 2D FEA models. Two hundred different realizations of microstructures were generated for each microstructure type to capture the stochastic response. The results confirm previously reported findings and experimental results. The results show that for a given fiber volume fraction, CNTs orientation, waviness, and agglomeration result in different elastic properties. It was shown that while a given microstructural feature will improve the elastic property, it will increase the variability in the elastic properties.

Sign in / Sign up

Export Citation Format

Share Document