Titrimetric determination of thiourea and silver with a picrate ion selective electrode

1977 ◽  
Vol 68 (3-4) ◽  
pp. 255-260 ◽  
Author(s):  
E. P. Diamandis ◽  
T. P. Hadjiioannou
Keyword(s):  
Ion Selective Electrode ◽  
Selective Electrode ◽  
Titrimetric Determination

Titrimetric determination of cobalt, nickel and lanthanoids in alloys for novel permanent magnets using ion selective electrodes

1981 ◽  
Vol 46 (4) ◽  
pp. 982-986
Author(s):  
Dagmar Kalavská ◽  
Adam Košturiak ◽  
Svetozár Kalavský
Keyword(s):  
Permanent Magnets ◽  
Copper Ion ◽  
Ion Selective Electrode ◽  
Selective Electrode ◽  
Fluoride Ions ◽  
Cobalt Nickel ◽  
Back Titration ◽  
Titrimetric Determination ◽  
Fluoride Ion Selective Electrode

A procedure of chelatometric determination of cobalt, nickel and lanthanoids based on back titration with Cu(II) ions using copper ion selective electrode has been developed and applied to alloys for novel type permanent magnets. In addition, a method has been worked out for direct titrimetric determination of lanthanoids with solution of fluoride ions in 75% ethanol using fluoride ion selective electrode.

Titration of sulphates and lead using lead ion selective electrode

1981 ◽  
Vol 46 (2) ◽  
pp. 368-376 ◽  
Author(s):  
Josef Veselý
Keyword(s):  
Ionic Strength ◽  
Electrode Surface ◽  
Salt Content ◽  
Ion Selective Electrode ◽  
Lead Ion ◽  
Selective Electrode ◽  
Limit Of Determination ◽  
Total Salt Content ◽  
Automatic Titration

Titration of sulphates with lead perchlorate employing lead ion selective electrode indication was studied using additions of various organic solvents at different pH' and ionic strength values. As the optimum emerged systems with 60-70% 1,4-dioxane, pH' 5.3-5.6. After dehydration with sodium hydroxide, dioxane must be freed from the electrode surface-oxidizing impurities by their reduction with sodium metal and subsequent distillation. The method was applied to determination of sulphates in mountain spring waters. Units of ppm can be determined; the limit of determination, however, depends considerably on the content of dioxane, total salt content in the sample, and speed of the semi-automatic titration. Lead can be determined with EDTA in concentrations down to c(Pb2+) = 5 . 10-6 mol l-1.

scholarly journals Using MoS2/Fe3O4 as Ion-Electron Transduction Layer to Manufacture All-Solid-State Ion-Selective Electrode for Determination of Serum Potassium

Chemosensors ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 155
Author(s):  
Yan Su ◽  
Ting Liu ◽  
Caiqiao Song ◽  
Aiqiao Fan ◽  
Nan Zhu ◽  
...  
Keyword(s):  
High Performance ◽  
Accurate Determination ◽  
Water Layer ◽  
Ion Selective Electrode ◽  
Potential Response ◽  
Selective Electrode ◽  
Response Measurement ◽  
Long Term Stability

As an essential electrolyte for the human body, the potassium ion (K+) plays many physiological roles in living cells, so the rapid and accurate determination of serum K+ is of great significance. In this work, we developed a solid-contact ion-selective electrode (SC-ISE) using MoS2/Fe3O4 composites as the ion-to-electron transducer to determine serum K+. The potential response measurement of MoS2/Fe3O4/K+-ISE shows a Nernst response by a slope of 55.2 ± 0.1 mV/decade and a low detection limit of 6.3 × 10−6 M. The proposed electrode exhibits outstanding resistance to the interference of O2, CO2, light, and water layer formation. Remarkably, it also presents a high performance in potential reproducibility and long-term stability.

Determination of urea in 10-?l blood serum samples with a urease reactor / ion-selective electrode cell

1983 ◽  
Vol 81 (1-2) ◽  
pp. 135-147 ◽  
Author(s):  
U. Thanei-Wyss ◽  
W. E. Morf ◽  
P. Lienemann ◽  
Z. Stefanac ◽  
I. Mostert ◽  
...  
Keyword(s):  
Blood Serum ◽  
Ion Selective Electrode ◽  
Selective Electrode ◽  
Serum Samples ◽  
Electrode Cell
Sign in / Sign up

Export Citation Format

Share Document