The quasi-static propagation of a plane strain crack in a power-law inhomogeneous linearly viscoelastic body

1987 ◽  
Vol 67 (1-4) ◽  
pp. 61-77 ◽  
Author(s):  
L. Schovanec ◽  
J. R. Walton
Keyword(s):  
Plane Strain ◽  
Power Law ◽  
Viscoelastic Body ◽  
Plane Strain Crack

scholarly journals The Penny-Shaped Crack and the Plane Strain Crack in an Infinite Body of Power-Law Material

1981 ◽  
Vol 48 (4) ◽  
pp. 830-840 ◽  
Author(s):  
M. Y. He ◽  
J. W. Hutchinson
Keyword(s):  
Plane Strain ◽  
Power Law ◽  
Deformation Theory ◽  
Small Strain ◽  
Stress And Strain ◽  
Infinite Body ◽  
Penny Shaped Crack ◽  
Shaped Crack ◽  
Remote Stress ◽  
Plane Strain Crack

A study is carried out of the problem of a penny-shaped crack in an infinite body of power-law material subject to general remote axisymmetric stressing conditions. The plane strain version of the problem is also examined. The material is incompressible and is characterized by small strain deformation theory with a pure power relation between stress and strain. The solutions presented also apply to power-law creeping materials and to a class of strain-rate sensitive hardening materials. Both numerical and analytical procedures are employed to obtain the main results. A perturbation solution obtained by expanding about the trivial state in which the stress is everywhere parallel to the crack leads to simple formulas which are highly accurate even when the remote stress is perpendicular to the crack.

Plane-Strain Crack-Tip Fields for Pressure-Sensitive Dilatant Materials

1990 ◽  
Vol 57 (1) ◽  
pp. 40-49 ◽  
Author(s):  
F. Z. Li ◽  
J. Pan
Keyword(s):  
Plane Strain ◽  
Effective Stress ◽  
Hydrostatic Stress ◽  
Yield Criterion ◽  
Crack Tip ◽  
Flow Rule ◽  
Pressure Sensitivity ◽  
Crack Tip Fields ◽  
Pressure Sensitive ◽  
Plane Strain Crack

Plane-strain crack-tip stress and strain fields are presented for materials exhibiting pressure-sensitive yielding and plastic volumetric deformation. The yield criterion is described by a linear combination of the effective stress and the hydrostatic stress, and the plastic dilatancy is introduced by the normality flow rule. The material hardening is assumed to follow a power-law relation. For small pressure sensitivity, the plane-strain mode I singular fields are found in a separable form similar to the HRR fields (Hutchinson, 1968a, b; Rice and Rosengren, 1968). The angular distributions of the fields depend on the material-hardening exponent and the pressure-sensitivity parameter. The low-hardening solutions for different degrees of pressure sensitivity are found to agree remarkably with the corresponding perfectly-plastic solutions. An important aspect of the effects of pressure-sensitive yielding and plastic dilatancy on the crack-tip fields is the lowering of the hydrostatic stress and the effective stress directly ahead of the crack tip, which may contribute to the experimentally-observed enhancement of fracture toughness in some ceramic and polymeric composite materials.

Virtual Methods in Creep Crack Growth Predictions in 316H Stainless Steels

2007 ◽  
Author(s):  
Masataka Yatomi ◽  
Kamran M. Nikbin
Keyword(s):  
Crack Growth ◽  
Plane Strain ◽  
Stainless Steels ◽  
Creep Crack Growth ◽  
Crack Propagation Rate ◽  
Creep Model ◽  
Elastic Plastic ◽  
Creep Crack ◽  
Plastic Creep ◽  
Plane Strain Crack

The paper discusses numerically based virtual techniques of creep crack growth predictions in a fracture mechanics component. The material properties used are for 316H stainless steels and the constitutive behaviour of the steel is described by a power law creep model. A damage-based approach is used to predict the crack propagation rate in compact tension (C(T)) specimens and the data are correlated against an independently determined C* parameter. Elastic-plastic-creep analyses are performed using two different crack growth criteria to predict crack extension under plane stress and plane strain conditions. The NSW and NSW-MOD strain exhaustion models are applied to compare to the experimental data and FE predictions. The plane strain crack growth rate predicted from the numerical analysis is found to be less conservative than the plane strain NSW model but more conservative than plane strain NSW-MOD model, for values of C* within the limits of the present creep crack growth testing standards. At higher loads and C* values, the plane strain crack growth rates, predicted using an elastic-plastic-creep material response, approach is considered and compared to the plane strain NSW-MOD model.

Sign in / Sign up

Export Citation Format

Share Document