Strain-gauge sensor for investigating the gas-pressure pulsations in gas lines at superhigh pressure

1980 ◽  
Vol 16 (8) ◽  
pp. 495-496
Author(s):  
V. D. Vasil'ev ◽  
A. S. Ignat'ev ◽  
A. G. Platonov ◽  
B. S. Fotin
Keyword(s):  
Strain Gauge ◽  
Gas Pressure ◽  
Pressure Pulsations ◽  
Strain Gauge Sensor

scholarly journals Development of Rocket Telemetry in Chamber Gas Pressure Monitoring with the MPXV7002DP Gas Pressure Sensor

2020 ◽  
Vol 2 (3) ◽  
pp. 103-107
Author(s):  
Anggara Trisna Nugraha ◽  
Dadang Priyambodo
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Pressure Sensor ◽  
Strain Gauge ◽  
Gas Pressure ◽  
Pressure Monitoring ◽  
Aerial Vehicles ◽  
Air Vehicle ◽  
Measurement Results ◽  
Strain Gauge Sensor ◽  
Chamber Gas

Telemetry is a process used to measure or record a physical quantity at a location far from the center of processing the measurement results. Telemetry systems on unmanned aerial vehicles can provide information such as position, altitude, direction, and status of the vehicle itself in real time when the air vehicle is operated. A rocket is a flying vehicle that moves by getting a boost through the combustion reaction that occurs in the rocket. Implementation of the strain gauge sensor through the MPXV7002DP gas pressure sensor, the amount of gas pressure is obtained at the time of combustion of the rocket and sent via wi-fi telemetry Pixhawk 447 MHz, the data on a laptop can be shown the gas pressure generated in the rocket chamber through the display of the Borland Delphi program with a distance of 150 m.

scholarly journals A Combined Thin Film/Thick Film Approach to Realize an Aluminum-Based Strain Gauge Sensor for Integration in Aluminum Castings

Sensors ◽  
2020 ◽  
Vol 20 (12) ◽  
pp. 3579 ◽  
Author(s):  
Rico Tiedemann ◽  
Dennis Lepke ◽  
Martin Fischer ◽  
Christoph Pille ◽  
Matthias Busse ◽  
...  
Keyword(s):  
Thin Film ◽  
Thick Film ◽  
Strain Gauge ◽  
Structural Model ◽  
Mechanical Load ◽  
Environmental Influence ◽  
Cast Aluminum ◽  
Point Of Interest ◽  
Aluminum Castings ◽  
Strain Gauge Sensor

There is currently a large demand for aluminum components to measure the mechanical and thermal loads to which they are subjected. With structural health monitoring, components in planes, vehicles, or bridges can monitor critical loads and potentially prevent an impending fatigue failure. Externally attached sensors need a structural model to obtain knowledge of the mechanical load at the point of interest, whereas embedded sensors can be used for direct measurement at the point of interest. To produce an embedded sensor, which is automatically encapsulated against environmental influence, the sensor must be able to withstand the boundary conditions of the host component’s manufacturing process. This embedding process is particularly demanding in the case of casting. Previous work showed that silicon-based sensors have a high failure rate when embedded in cast aluminum parts and that using aluminum as a substrate is preferable under these circumstances. In the present paper, we present the fabrication process for the combination of a thick-film insulation and a thin-film strain gauge sensor, on such an aluminum substrate. The sensor is capable of withstanding high temperatures of at least 600 °C for over 20 min and a subsequent embedding in a gravity die casting process.

Theoretical analysis of flexible strain-gauge sensor with nanofibrillar mechanical interlocking

2015 ◽  
Vol 15 (3) ◽  
pp. 274-278 ◽  
Author(s):  
Sangyul Baik ◽  
Namhun Kim ◽  
Tae-il Kim ◽  
Heeyeop Chae ◽  
Ki Hyun Kim ◽  
...  
Keyword(s):  
Theoretical Analysis ◽  
Strain Gauge ◽  
Mechanical Interlocking ◽  
Strain Gauge Sensor

Application of Sensor on Modern Sizing Machine in Term of Intelligent Control

2013 ◽  
Vol 712-715 ◽  
pp. 1900-1903
Author(s):  
Yun Tong
Keyword(s):  
Intelligent Control ◽  
Strain Gauge ◽  
Frequency Converter ◽  
Resistance Strain ◽  
Resistance Strain Gauge ◽  
Photoelectric Encoder ◽  
Strain Gauge Sensor ◽  
Intelligence Control ◽  
Winding Tension

Concerning intelligence control of sizing machine in textile process, resistance strain gauge sensor is used to detect the winding tension of weavers beam, capacitance level transducer can be used to monitor the level of size glue in sizing box so as to maintain the constant sizing regain , photoelectric encoder is a key device for regulate the elongation for various zone with the help of frequency converter governed by PLC , photoelectric encoder is indispensable for regulation of elongation.4444

An RFID-Enabled Wireless Strain Gauge Sensor for Static and Dynamic Structural Monitoring

2017 ◽  
Vol 17 (2) ◽  
pp. 286-294 ◽  
Author(s):  
Emidio DiGiampaolo ◽  
Alessandro DiCarlofelice ◽  
Amedeo Gregori
Keyword(s):  
Strain Gauge ◽  
Structural Monitoring ◽  
Strain Gauge Sensor

Highly sensitive spintronic strain-gauge sensor and Spin-MEMS microphone

2019 ◽  
Vol 58 (SD) ◽  
pp. SD0802 ◽  
Author(s):  
Yoshihiko Fuji ◽  
Yoshihiro Higashi ◽  
Shiori Kaji ◽  
Kei Masunishi ◽  
Tomohiko Nagata ◽  
...  
Keyword(s):  
Strain Gauge ◽  
Highly Sensitive ◽  
Mems Microphone ◽  
Strain Gauge Sensor
Sign in / Sign up

Export Citation Format

Share Document