Use of high-strength alloyed cast iron for heat-resistant castings

1982 ◽  
Vol 18 (11) ◽  
pp. 544-545
Author(s):  
G. N. Shtyka ◽  
A. V. Borodin ◽  
V. N. Oleinik ◽  
S. N. Primerov
Keyword(s):  
Cast Iron ◽  
High Strength ◽  
Heat Resistant ◽  
Alloyed Cast ◽  
Alloyed Cast Iron

scholarly journals Application of the optimally alloyed cast irons in order to increase the durability and to ensure the cost reduction of mining and metallurgical products

2021 ◽  
Vol 303 ◽  
pp. 01005
Author(s):  
Dmitry Lubyanoi ◽  
Evgeny Pudov ◽  
Evgeny Kuzin ◽  
Olga Semenova
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
Operational Reliability ◽  
Cast Irons ◽  
Metallurgical Production ◽  
Alloyed Cast ◽  
Alloyed Cast Iron ◽  
And Performance ◽  
Working Bodies ◽  
The Cost

The article shows the relevance of the use of alloyed cast iron in mining and metallurgical engineering. The article discusses the technologies for producing naturally alloyed cast iron. For working bodies and friction units of mining machines, such as pumps, coal pumps, hydrocyclones, crushers and mills. The main type of wear for them is abrasive. To increase the wear resistance of cast iron the production of cast iron has not been sufficiently studied yet. Although the use of cast iron in a complex alloyed with manganese, silicon, chromium, titanium and vanadium has been studied. The article studies the influence of manganese, titanium and vanadium on the mechanical properties and performance of machine parts and products of mining and metallurgical production in contact with high-temperature and highly abrasive media. The rational content of titanium and vanadium in gray cast irons is established in the range of 0.05-0.1%, which ensures their heat resistance and increases their wear resistance. The content of these elements can be increased to 0.07-0.12%. Bushings made of this cast iron have the required wear resistance and can increase the operational reliability of the equipment in the conditions of mining and metallurgical production. They also replace non-ferrous metals, as well as products obtained by powder metallurgy methods.

The Effect of Seven Etching Solutions used for the Differentiated Visualization of Complex Microstructures in Low-Alloyed Cast Iron

2021 ◽  
Vol 58 (8) ◽  
pp. 507-538
Author(s):  
S. Duwe ◽  
B. Tonn
Keyword(s):  
Cast Iron ◽  
Retained Austenite ◽  
Microstructural Analysis ◽  
Optical Microscope ◽  
Alloyed Cast ◽  
Reflected Light ◽  
Combined Use ◽  
Light Optical Microscope ◽  
Steel Grades ◽  
Alloyed Cast Iron

Abstract For numerous steel grades, detailed descriptions of different etching techniques and etching times for microstructural analysis are available. However, there are only few reference works for low-alloyed cast iron. Particularly for complex microstructures with combined fractions of bainite, ferrite, pearlite, retained austenite, carbides and martensite, there are only few detailed collections. In addition, the effects of the etchants are rarely investigated for the same image section. Therefore, this study will exclusively compare identical microstructural regions and the effect of different etchants on them. Two specific sample areas were selected in a low-alloyed cast iron and the effect of both surface removal etching and tint etching reagents on them was examined under a reflected light optical microscope and a scanning electron microscope. The results of the study have shown that some etchants for complex microstructures are only suitable in case potentially present phases are already known. However, the combined use of two etching solutions in particular, led to a very detailed and highcontrast image, capable of revealing and resolving microstructures with a variety of phases.

High alloyed cast iron

2008 ◽  
Author(s):  
Manfred B. Rockel ◽  
Dietmar Schedlitzky ◽  
Roman Bender
Keyword(s):  
Cast Iron ◽  
Alloyed Cast ◽  
Alloyed Cast Iron
Sign in / Sign up

Export Citation Format

Share Document