Service temperature conditions of soaking pit wall linings

Metallurgist ◽  
1977 ◽  
Vol 21 (8) ◽  
pp. 535-536
Author(s):  
P. A. Selyanin ◽  
I. P. Tsibin ◽  
N. A. Mikov
Keyword(s):  
Service Temperature ◽  
Temperature Conditions

Characterization of the Thermo-Oxidative Stability of Filled Thermoplastic Polyetherimide

Materials ◽  
2003 ◽  
Author(s):  
V. A. Harinath ◽  
Jianzhong Lou ◽  
Jag Sankar ◽  
Leonard Uitenham
Keyword(s):  
High Temperature ◽  
Thermogravimetric Analysis ◽  
Oxidative Stability ◽  
Polymer Composites ◽  
Polymer Composite ◽  
Polymeric Composites ◽  
Filler Loading ◽  
Service Temperature ◽  
Temperature Conditions

Selected fillers were incorporated to prepare polytherimide composite. The influence of fillers on the thermo-oxidative stability of the composite was studied by thermogravimetric analysis. The results showed that at optical filler loading and characteristics, the polymer composite became superior in its thermo-oxidative stability that is very promising in widening the window of service temperature of polyimides for extremely high temperature conditions where most polymeric composites fail. The findings should prove useful in developing high-temperature polymer composites for aerospace and electronics applications.

Pengaruh Penambahan Molases Pada Kulit Pisang Kapendis Untuk Media Produksi Xilanase B.Stearothermophillus DSM 22

2019 ◽  
Vol 15 (3) ◽  
Author(s):  
Trismillah
Keyword(s):  
Enzyme Activity ◽  
Ammonium Sulfate ◽  
Banana Peel ◽  
Partial Purification ◽  
Temperature Conditions ◽  
Cavendish Banana ◽  
Working Volume ◽  
Initial Ph ◽  
Xylanase Enzyme

Cavendish banana peel can be used as a substitute for the expensive xylan, while molasses than as a source of carbon as well as nitrogen, minerals and nutrients needed for the growth of microbes that can produce the enzyme. Xylanase produced from Bacillus stearothermopillus DSM 22, using media cavendish banana peels with the addition of molasses 1%, 2%, and 3%. Fermentation is done in a shaker incubator at 550C temperature conditions, initial pH 8, and 250 rpm agitation. The result showed the highest enzyme activity of 4,14 ± 0,16 U/mL min., on the addition 2% molasses after 24 hours. Further fermentation carried out in the fermenter working volume of 3.5 liters, with the condition of temperature 550C, pH 8, aeration 1 vvm, agitation 250 rpm, the highest spesific enzyme of activity of 51,62 ± 0,16 U/mg after 24 hours. Partial purification of xylanase enzyme fermentation is done with the results of microfiltration, ultrafiltration, ammonium sulfate (0-80%) and dialysis. There is an increase in the purity of the enzyme at each stage of purification, the highest purity on dialysis 3.23 times of crude enzymes.Kulit buah pisang kapendis dapat digunakan sebagai pengganti xilan yang harganya mahal, sementara molases selain sebagai sumber karbon serta nitrogen, mineral dan nutrisi dibutuhkan untuk pertumbuhan mikroba yang dapat menghasilkan enzim. Xilanase yang dihasilkan dari Bacillus stearothermopillus DSM 22, menggunakan media kulit pisang kapendis dengan penambahan molase 1%, 2%, dan 3%. Fermentasi dilakukan dalam shaker inkubator pada temperatur 550C, pH awal 8, dan agitasi 250 rpm. Hasilnya menunjukkan aktivitas enzim tertinggi 4,14 ± 0,16 U/mL min., pada penambahan 2% molases setelah 24 jam. Selanjutnya fermentasi dilakukan di dalam fermentor, volume kerja dari 3,5 liter, dengan kondisi temperatur 550C, pH 8, aeration 1 vvm, agitasi 250 rpm, aktivitas spesifik tertinggi 51,62 ± 0,16 U/mg setelah 24 jam. Pemurnian parsial fermentasi enzim xilanase dilakukan dengan hasil mikrofiltrasi, ultrafiltrasi, amonium sulfat (0-80%) dan dialisis. Ada peningkatan kemurnian enzim pada setiap tahap pemurnian, kemurnian tertinggi pada dialisis 3,23 kali dari enzim kasar.Keywords: Xylanase, B. stearothermophillus DSM 22, Cavendish banana peel, molasses, enzyme activity

NICKELVAC X-751

Alloy Digest ◽  
1990 ◽  
Vol 39 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Aluminum Content ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Vacuum Induction Melting ◽  
Induction Melting ◽  
Service Temperature ◽  
Maximum Service Temperature

Abstract NICKEL VAC X-751 is a modification of NICKEL VAC X-750 carrying higher aluminum content (0.90-1.50 vs 0.4-1.0%). This raises the maximum service temperature 100 F(55 C) to 1600 F(871 C). NICKEL VAC X-751 has a simplified and shortened heat treating cycle relative to NICKEL VAC X-750. It is produced by vacuum induction melting followed by vacuum arc or electroslag remelting. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-387. Producer or source: Teledyne Allvac.

Sign in / Sign up

Export Citation Format

Share Document