Quantitative analysis of the efficiency of the secondary-flow method to intensify convective heat transfer

1995 ◽  
Vol 31 (6) ◽  
pp. 289-294
Author(s):  
V. A. Kirpikov ◽  
S. M. Musavi Nainiyan
Keyword(s):  
Heat Transfer ◽  
Quantitative Analysis ◽  
Convective Heat Transfer ◽  
Secondary Flow ◽  
Convective Heat ◽  
Flow Method

Convective Heat Transfer Enhancement in a Circular Tube Using Twisted Tape

2009 ◽  
Vol 131 (8) ◽  
Author(s):  
Zhi-Min Lin ◽  
Liang-Bi Wang
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Convective Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Secondary Flow ◽  
Convective Heat ◽  
Tube Wall ◽  
Twisted Tape ◽  
Transfer Enhancement ◽  
Thermal Boundary Conditions

The secondary flow has been used frequently to enhance the convective heat transfer, and at the same flow condition, the intensity of convective heat transfer closely depends on the thermal boundary conditions. Thus far, there is less reported information about the sensitivity of heat transfer enhancement to thermal boundary conditions by using secondary flow. To account for this sensitivity, the laminar convective heat transfer in a circular tube fitted with twisted tape was investigated numerically. The effects of conduction in the tape on the Nusselt number, the relationship between the absolute vorticity flux and the Nusselt number, the sensitivity of heat transfer enhancement to the thermal boundary conditions by using secondary flow, and the effects of secondary flow on the flow boundary layer were discussed. The results reveal that (1) for fully developed laminar heat convective transfer, different tube wall thermal boundaries lead to different effects of conduction in the tape on heat transfer characteristics; (2) the Nusselt number is closely dependent on the absolute vorticity flux; (3) the efficiency of heat transfer enhancement is dependent on both the tube wall thermal boundaries and the intensity of secondary flow, and the ratio of Nusselt number with twisted tape to its counterpart with straight tape decreases with increasing twist ratio while it increases with increasing Reynolds number for both uniform wall temperature (UWT) and uniform heat flux (UHF) conditions; (4) the difference in the ratio between UWT and UHF conditions is also strongly dependent on the conduction in the tape and the intensity of the secondary flow; and (5) the twist ratio ranging from 4.0 to 6.0 does not necessarily change the main flow velocity boundary layer near tube wall, while Reynolds number has effects on the shape of the main flow velocity boundary layer near tube wall only in small regions.

Numerical Investigation of Slip Flow and Heat Transfer in Rotating Rectangular Microchannels

2012 ◽  
Author(s):  
Pratanu Roy ◽  
N. K. Anand ◽  
Debjyoti Banerjee
Keyword(s):  
Heat Transfer ◽  
Boundary Condition ◽  
Convective Heat Transfer ◽  
Secondary Flow ◽  
Convective Heat ◽  
Slip Flow ◽  
Slip Boundary Condition ◽  
Fluid Temperature ◽  
Slip Boundary ◽  
Flow And Heat Transfer

Investigation of fluid flow and heat transfer in rotating microchannels is important for centrifugal microfluidics, which has emerged as an advanced technique in biomedical applications and chemical separations. The pseudo forces namely the centrifugal force and the Coriolis force arising as a consequence of the rotating reference frame change the flow pattern significantly from the parabolic profile in a non-rotating channel. The convective heat transfer process is also influenced by the secondary flow introduced by the rotational effect. Moreover, if the microchannel wall is hydrophobic, slip flow can occur inside the channel when the conventional no slip boundary condition is no longer valid. In this work, we have numerically investigated the flow and heat transfer inside a straight rotating rectangular microchannel in the slip flow regime. A pressure based finite volume technique in a staggered grid was applied to solve the steady incompressible Navier-Stokes and energy equations. It has been observed that, depending on the rotational velocity, different slip velocities are induced at the channel walls. The average fluid temperature increases with the increase of rotation as convective heat transfer mechanism is increased due to the secondary flow. However, the slip boundary condition has a negligible effect on the temperature profiles.

scholarly journals Hydrothermal Behavior of Transient Fluid Flow and Heat Transfer Through a Rotating Curved Rectangular Duct with Natural and Forced Convection

2020 ◽  
Vol 7 (4) ◽  
pp. 501-514
Author(s):  
Ratan Kumar Chanda ◽  
Mohammad Sanjeed Hasan ◽  
Md. Mahmud Alam ◽  
Rabindra Nath Mondal
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Steady State ◽  
Convective Heat Transfer ◽  
Secondary Flow ◽  
Convective Heat ◽  
Time History ◽  
Rectangular Duct ◽  
Chaotic Flow ◽  
Negative Direction

The present work explores a spectral-based computational study on hydrothermal behavior of transient fluid flow with natural and forced convective heat transfer through a rotating curved rectangular duct of strong curvature. The outer wall of the duct is heated while the inner wall cooled, the other walls being thermally insulated. The system rotates about the vertical axis in the positive and negative direction for the Taylor number (-1000≤Tr≤1000) with a constant non-dimensional pressure gradient force, the Dean number Dn = 2000. Time-history analysis is performed and fluid characteristics are well determined by depicting the phase space of the time-history result. It is found that the chaotic flow turns into steady-state flow through multi-periodic and periodic oscillating flows, if Tr is increased either in the positive or in the negative direction. Streamlines of secondary flow and isotherms are obtained at some specific values of Tr, and it is found that the time-dependent flow consists of asymmetric 2- to multi-vortex solutions. Vortex structure of secondary flows is obtained for physically realizable solutions and it is found that maximum 8-vortex is obtained for the chaotic solution while 2-vortex for the steady-state solution. Nusselt number as well as temperature gradient is calculated as an index of heat transfer, and it is found that convective heat transfer is significantly enhanced by the secondary flow; and the chaotic flow, which occurs relatively at small Tr, boosts heat transfer more effectively than the steady-state or other solutions. Finally, our numerical results have been validated with the experimental outcomes and it is found that there is a good agreement between the numerical and experimental investigations.

Sign in / Sign up

Export Citation Format

Share Document