Digital indication of the technological parameters in the converter shop

Metallurgist ◽  
1973 ◽  
Vol 17 (7) ◽  
pp. 500-502
Author(s):  
S. N. Zaderei ◽  
N. S. Kuchin ◽  
V. F. Parshin
Keyword(s):  
Converter Shop ◽  
Technological Parameters ◽  
Digital Indication

A possibility of using nickel concentrate, obtained as a result of hydrometallurgical enrichment of manganese-containing raw materials, at steel alloying

2020 ◽  
Vol 76 (7) ◽  
pp. 709-715
Author(s):  
O. Yu. Kichigina
Keyword(s):  
Raw Materials ◽  
Experimental Studies ◽  
Selective Extraction ◽  
Technological Parameters ◽  
Nickel Iron ◽  
Nickel Recovery ◽  
Nickel Concentrate ◽  
Steel Alloying ◽  
High Degree ◽  
Comprehensive Processing

At production of stainless steel expensive alloying elements, containing nickel, are used. To decrease the steel cost, substitution of nickel during steel alloying process by its oxides is an actual task. Results of analysis of thermodynamic and experimental studies of nickel reducing from its oxide presented, as well as methods of nickel oxide obtaining at manganese bearing complex raw materials enrichment and practice of its application during steel alloying. Technology of comprehensive processing of complex manganese-containing raw materials considered, including leaching and selective extraction out of the solution valuable components: manganese, nickel, iron, cobalt and copper. Based on theoretical and experiment studies, a possibility of substitution of metal nickel by concentrates, obtained as a result of hydrometallurgical enrichment, was confirmed. Optimal technological parameters, ensuring high degree of nickel recovery out of the initial raw materials were determined. It was established, that for direct steel alloying it is reasonable to add into the charge pellets, consisting of nickel concentrate and coke fines, that enables to reach the through nickel recovery at a level of 90%. The proposed method of alloying steel by nickel gives a possibility to decrease considerably steel cost at the expense of application of nickel concentrate, obtained out of tails of hydrometallurgical enrichment of manganese-bearing raw materials, which is much cheaper comparing with the metal nickel.

Operation intensification methods of aggressive industrial sewage neutralization facilities

2020 ◽  
Vol 76 (11) ◽  
pp. 1149-1153
Author(s):  
N. S. Tsarev ◽  
V. I. Aksenov ◽  
I. I. Nichkova
Keyword(s):  
Cold Water ◽  
Specific Productivity ◽  
Technological Properties ◽  
Technological Parameters ◽  
Preliminary Heating ◽  
Sediment Treatment ◽  
Circulating Water ◽  
Equipment Operation ◽  
Sediment Volume ◽  
Industrial Sewage

To neutralize the waste pickling solutions and rinsing water, resulting from cleaning metal products s surface of rust by acids solutions, lime is used. Being cheap, this method of sewage neutralization has considerable drawbacks. Forming in the technological pipes strong gypsum depositions and low specific productivity of the equipment for sediment dewatering are most significant of them. Characteristic of aggressive industrial sewage, formed at pickling of ferrous metals presented. Methods of elimination of drawbacks of industrial sewage neutralization by lime considered, including stabilization of neutralized industrial sewage and control of properties of the sediment formed. It was noted, that stability of the circulating water can be provided by accelerating of crystallization of the forming gypsum sediments by introducing in it fine priming powder and heating the neutralized water up to 65-70 °С followed by thermal softening of a part of circulating water, removed out of the circulating system. It was shown, that the heating of the water and the ongoing changes of the composition and properties of the sediment result in decrease of filtration resistance 2-3 folds, increase of deposition speed 3-4 folds and decrease the sediment volume 1.5-2 folds comparing with lime neutralization in cold water. Calculated dozes of lime at the heating were taken the same as at the regular lime neutralization. Elimination of the circulating water oversaturation by bi-water gypsum can be reached also by addition into the water of powder-like gypsum pulp - priming powder for microcrystals of the gypsum, followed by aeration during 30-40 min. This method was tested under industrial conditions. Technological properties of the forming sediment can be improved by sediment treatment by flocculants and preliminary heating of the neutralized water up to 65-70 °С. Control of technological properties of the sediment is done by addition of flocculants and heating of the neutralized water. Recommendations for improving operation of the neutralization facilities presented with indicating particular technological parameters of the equipment operation for sewage and sediment treatment. 

APPLYING THE ISF TECHNOLOGY TO PRODUCE THE CAR PART MODELS

2010 ◽  
Vol 13 (4) ◽  
pp. 91-98
Author(s):  
Tuan Dinh Phan ◽  
Binh Thien Nguyen ◽  
Dien Khanh Le ◽  
Phuong Hoang Pham
Keyword(s):  
Rapid Prototyping ◽  
Incremental Sheet Forming ◽  
Cad Model ◽  
Post Processing ◽  
Technological Parameters ◽  
Batch Production ◽  
Complex Products ◽  
3D Cad ◽  
Real Size ◽  
Single Batch

The paper presents an application the research results previously done by group on the influence of technological parameters to the deformation angle and finish surface quality in order to choose technology parameters for the incremental sheet forming (ISF) process to produce products for the purpose of rapid prototyping or single-batch production, including all steps from design and process 3D CAD model, calculate and select the technological parameters, setting up manufacturing and the stage of post-processing. The samples formed successfully showed high applicability of this technology to practical work, the complex products with the real size can be produced in industries: automotive, motorcycle, civil...

KINEMATIC FEATURES OF THE LAPPING PROCESS AND DETERMINATION OF ITS BASIC PARAMETERS

2020 ◽  
Vol 7 (3) ◽  
pp. 23-28
Author(s):  
EZIZ SARVAN SHIRVAN ◽  
Keyword(s):  
Dynamic Properties ◽  
Cutting Speed ◽  
Equilibrium System ◽  
Technological Parameters ◽  
Kinematic Characteristics ◽  
Angular Velocities ◽  
Basic Parameters ◽  
Grinding Tool ◽  
Mathematical Relationships ◽  
Analytical Expressions

This paper discusses the kinematic characteristics of lapping process and the main parameters of the process. It was determined that the influencing degree of technological parameters to the forming surface and processes. It was projected the construction of the lapping head for processing of internal cylindrical surfaces, scheme of the lapping operation and graphic description of the forces influencing. The relationships between the axial, radial and tangential cutting forces and the effect of the combined force thereof are determined in order to ensure the necessary surface pressure. During the analysis geometric and mathematical relationships were obtained. The extracted analytical expressions can be realized by further experimental researches and can be used in engineering calculations of technological parameters of processing by lapping. Angular velocity, friction force, linear velocity, also the length of the tactile curve and the radius of the part can be considered the main kinematic and dynamic parameters of the process that the formation of the surface, also the course of the process depends on these parameters. Depending on the kinematic parameters, the wear nature of the tool changes and this changes the linear and angular velocities, which have a significant impact on the accuracy, quality and productivity of processing. When examining the technological capabilities of the process, the nature of the movement between the part and the grinding tool, also changes in cutting speed are often considered as a main factor. Analytical expressions were obtained to determine the main parameters of the process, taking into account the kinematic characteristics of the friction process. These expressions can be used in engineering calculations and allow to determine the optimal values of the processing mode. In order to obtain the required micrometric surface cleanliness and measurement accuracy, correlation relationships were established between the main parameters of the process, equations of the equilibrium system of shear forces were compiled and analytical expressions were obtained based on the analysis of kinematic and dynamic properties of the system.

Innovation and investment framework for the development of competitive fisheries and aquaculture

2019 ◽  
pp. 31-38
Author(s):  
Nataliia Vdovenko ◽  
Maryna Pavlenko ◽  
Elena Hryniuk
Keyword(s):  
Economic Conditions ◽  
Technological Parameters ◽  
Critical Situation ◽  
Competitive Activity ◽  
Scientific Approach ◽  
Production Technologies ◽  
Modern Economic ◽  
Innovative Economy ◽  
Combination Of Methods ◽  
Production Plans

The purpose of the article it consists in the substantiation of innovation and investment principles of competitive development of fisheries and aquaculture in order to effectively conduct business in modern economic conditions and to comply with technological parameters of production, introduce innovations in production, and economical attitude to fish and water resources. Methodology research consists in using a combination of methods: economic-statistical, monographic, systemic, economic-mathematical, abstract-logical and others. The scientific novelty the re- sults obtained include the introduction of innovative, economically viable and competitive production technologies based on a scientific approach to organizing an aquaculture business, namely the ability to quickly and efficiently respond to external challenges, find a way out of a critical situation and correctly adjust production plans in accordance with changes in market conditions. Conclusions. Substantially modern principles of the effective functioning of fisheries in order to ensure competitive activity. Regulatory tools are proposed to ensure the profitability of the aquaculture business, which include attracting in- vestments for the acquisition of capital goods, training specialists and constantly improving their skills, and ensuring efficient fisheries production in an innovative economy.

Effect Of Technological Parameters Of Esr On The Features Of Melting Of Consumable Electrode From Precision Alloy 29nk

2019 ◽  
Vol 2019 (4) ◽  
pp. 4-8
Author(s):  
I.V. Protokovilov ◽  
◽  
D.A. Petrov ◽  
V.B. Porokhonko ◽  
◽  
...  
Keyword(s):  
Consumable Electrode ◽  
Technological Parameters ◽  
Precision Alloy

Possible examinations of stone machining focused on the relationship between technological parameters and surface quality

2013 ◽  
Vol 4 (1) ◽  
pp. 63-68 ◽  
Author(s):  
Zs. Kun ◽  
I. G. Gyurika
Keyword(s):  
Surface Roughness ◽  
Metal Cutting ◽  
Cutting Speed ◽  
Theoretical Background ◽  
Motion Path ◽  
Depth Of Cut ◽  
Manufacturing Cost ◽  
Technological Parameters ◽  
The Relationship ◽  
Manufacturing Time

Abstract The stone products with different sizes, geometries and materials — like machine tool's bench, measuring machine's board or sculptures, floor tiles — can be produced automatically while the manufacturing engineer uses objective function similar to metal cutting. This function can minimise the manufacturing time or the manufacturing cost, in other cases it can maximise of the tool's life. To use several functions, manufacturing engineers need an overall theoretical background knowledge, which can give useful information about the choosing of technological parameters (e.g. feed rate, depth of cut, or cutting speed), the choosing of applicable tools or especially the choosing of the optimum motion path. A similarly important customer's requirement is the appropriate surface roughness of the machined (cut, sawn or milled) stone product. This paper's first part is about a five-month-long literature review, which summarizes in short the studies (researches and results) considered the most important by the authors. These works are about the investigation of the surface roughness of stone products in stone machining. In the second part of this paper the authors try to determine research possibilities and trends, which can help to specify the relation between the surface roughness and technological parameters. Most of the suggestions of this paper are about stone milling, which is the least investigated machining method in the world.

Study on Effects of Technological Parameters of Micro-Arc Oxidation on Properties of Oxide Coatings

2019 ◽  
Vol 24 (4) ◽  
pp. 363-369
Author(s):  
Ekaterina A. Pecherskaya ◽  
◽  
Pavel E. Golubkov ◽  
Oleg V. Karpanin ◽  
Dmitriy V. Artamonov ◽  
...  
Keyword(s):  
Oxide Coatings ◽  
Technological Parameters ◽  
Micro Arc Oxidation
Sign in / Sign up

Export Citation Format

Share Document