Diffusion to a solid spherical particle in a viscous fluid flow for finite reynolds numbers

1972 ◽  
Vol 4 (6) ◽  
pp. 82-83 ◽  
Author(s):  
Yu. P. Gupalo ◽  
Yu. S. Ryazantsev
Keyword(s):  
Fluid Flow ◽  
Viscous Fluid ◽  
Spherical Particle ◽  
Reynolds Numbers ◽  
Viscous Fluid Flow

Experiments on a viscous fluid flow between concentric rotating spheres

1976 ◽  
Vol 78 (2) ◽  
pp. 317-335 ◽  
Author(s):  
Manfred Wimmer
Keyword(s):  
Reynolds Number ◽  
Fluid Flow ◽  
Flow Field ◽  
Viscous Fluid ◽  
Reynolds Numbers ◽  
Friction Torque ◽  
Hot Wire ◽  
Simple Method ◽  
Viscous Fluid Flow ◽  
Wide Range

Some experimental results on incompressible viscous fluid flow in the gap between two concentric rotating spheres are discussed. The flow field in the spherical gap has been studied qualitatively by flow visualization (photographs) and quantitatively by measurements by the hot-wire technique. For a wide range of Reynolds numbers, the friction torque was measured for several gap widths and a relatively simple method of determining the torque theoretically is given. At higher Reynolds numbers instabilities appear. Their different behaviour for relatively small and large gap widths is demonstrated. For the larger gap widths, the different appearance of the Taylor–Görtler vortices, the reason for their generation, their regimes of existence as well as their influence on the friction torque are thoroughly treated. Detailed information is given on the new effect of the dependence of the wavelength of the vortices on the Reynolds number.

scholarly journals Unsteady Rotational Motion of a Slip Spherical Particle in a Viscous Fluid

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
E. A. Ashmawy
Keyword(s):  
Boundary Condition ◽  
Fluid Flow ◽  
Angular Velocity ◽  
Viscous Fluid ◽  
Spherical Particle ◽  
Rotational Motion ◽  
Fluid Flows ◽  
Slip Boundary Condition ◽  
Viscous Fluid Flow ◽  
Slip Boundary

The unsteady rotational motion of a slip spherical particle with a nonuniform angular velocity in an incompressible viscous fluid flow is discussed. The technique of Laplace transform is used. The slip boundary condition is applied at the surface of the sphere. A general formula for the resultant torque acting on the surface of the sphere is deduced. Special fluid flows are considered and their results are represented graphically.

Experiments and mechanistic modeling of viscosity effect on a multistage ESP performance under viscous fluid flow

2021 ◽  
pp. 095765092110149
Author(s):  
Yi Shi ◽  
Jianjun Zhu ◽  
Haoyu Wang ◽  
Haiwen Zhu ◽  
Jiecheng Zhang ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Viscous Fluid ◽  
Prediction Error ◽  
Flow Direction ◽  
Fluid Viscosity ◽  
Oil Viscosity ◽  
Viscous Fluid Flow ◽  
Viscosity Effect ◽  
High Production Rate ◽  
Pump Head

Assembled in series with multistage, Electrical Submersible Pumps (ESP) are widely used in offshore petroleum production due to the high production rate and efficiency. The hydraulic performance of ESPs is subjected to the fluid viscosity. High oil viscosity leads to the degradation of ESP boosting pressure compared to the catalog curves under water flow. In this paper, the influence of fluid viscosity on the performance of a 14-stage radial-type ESP under varying operational conditions, e.g. rotational speeds 1800–3500 r/min, viscosities 25–520 cP, was investigated. Numerical simulations were conducted on the same ESP model using a commercial Computational Fluid Dynamics (CFD) software. The simulated average pump head is comparable to the corresponding experimental data under different viscosities and rotational speeds with less than ±20% prediction error. A mechanistic model accounting for the viscosity effect on ESP boosting pressure is proposed based on the Euler head in a centrifugal pump. A conceptual best-match flowrate QBM is introduced, at which the impeller outlet flow direction matches the designed flow direction. The recirculation losses caused by the mismatch of velocity triangles and other head losses resulted from the flow direction change, friction loss and leakage flow etc., are included in the model. The comparison of model predicted pump head versus experimental measurements under viscous fluid flow conditions demonstrates good agreement. The overall prediction error is less than ±10%.

scholarly journals Dispersion of metallic/ceramic matrix nanocomposite material through porous surfaces in magnetized hybrid nanofluids flow with shape and size effects

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
M. Zubair Akbar Qureshi ◽  
S. Bilal ◽  
M. Y. Malik ◽  
Qadeer Raza ◽  
El-Sayed M. Sherif ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Viscous Fluid ◽  
Metallic Matrix ◽  
Ceramic Matrix ◽  
Physical Parameters ◽  
Viscous Fluid Flow ◽  
Hybrid Nanofluids ◽  
Matrix Nanocomposites ◽  
Matrix Nanocomposite

AbstractMatrix nanocomposites are high performance materials possessing unusual features along with unique design possibilities. Due to extraordinary thermophysical characteristic contained by these matrix nanocomposites materials they are useful in several areas ranging from packaging to biomedical applications. Being an environment friendly, utilization of nanocomposites offer new technological opportunities for several sectors of aerospace, automotive, electronics and biotechnology. In this regards, current pagination is devoted to analyze thermal features of viscous fluid flow between orthogonally rotating disks with inclusion of metallic matrix nanocomposite (MMNC) and ceramic matrix nanocomposites (CMNC) materials. Morphological aspects of these nanomaterials on flow and heat transfer characteristics has been investigated on hybrid viscous fluid flow. Mathematical structuring of problem along with empirical relations for nanocomposites materials are formulated in the form of partial differential equations and later on converted into ordinary differential expressions by using suitable variables. Solution of constructed coupled differential system is found by collaboration of Runge–Kutta and shooting methods. Variation in skin friction coefficient at lower and upper walls of disks along with measurement about heat transfer rate are calculated against governing physical parameters. Impact of flow concerning variables on axial, radial components of velocity and temperature distribution are also evaluated. Contour plots are also drawn to explore heat and thermal profiles. Comparison and critical analysis of MMNc and CMNc have been presented at lower and upper porous disks. Our computed analysis indicates that hybrid nanofluids show significant influence as compared to simple nanofluids with the permutation of the different shape factors.

Convective and peristaltic viscous fluid flow with variable viscosity

2017 ◽  
Vol 26 (1) ◽  
pp. 69-78 ◽  
Author(s):  
M. Awais ◽  
U. Bukhari ◽  
A. Ali ◽  
H. Yasmin
Keyword(s):  
Fluid Flow ◽  
Viscous Fluid ◽  
Variable Viscosity ◽  
Viscous Fluid Flow
Sign in / Sign up

Export Citation Format

Share Document