Determining the quantity of spare parts required for the servicing and repairs of measuring equipment

1969 ◽  
Vol 12 (11) ◽  
pp. 1601-1602
Author(s):  
O. V. Kamenskii
Keyword(s):  
Measuring Equipment ◽  
Spare Parts

scholarly journals Method for testing modern common rail piezoelectric fuel injectors

2021 ◽  
Author(s):  
Tomasz Stoeck
Keyword(s):  
Measuring Equipment ◽  
Test Bench ◽  
Spare Parts ◽  
Common Rail ◽  
Fuel Injectors ◽  
Reference Models ◽  
Regeneration Procedure ◽  
Repairable Components

The paper presents the author's own method for testing piezoelectric common rail fuel injectors, which for many years were considered non-repairable components. This was mainly due to the lack of availability of spare parts and dedicated measuring equipment, enabling full diagnostics under test bench conditions. As a result, their workshop and laboratory servicing was very limited, as effective disassembly concerned basicaly only the plunger and barrel assembly (needle with nozzle) for selected reference models. The situation has now improved to such an extent that an author’s own regeneration procedure has been proposed with the replacement of the most important controls and actuators. The tests were carried out on the example of Siemens VDO Continental PCR 2.3 fuel injectors from one engine, listing the most important stages of this process, including the correction of fuel dosage and returns.

Teknologi Inokulasi Besi Cor Kelabu FC-250 Untuk Mencegah Pengerasan Pada Dove Tale Produk Ragum Tipe 125

2019 ◽  
Vol 16 (2) ◽  
Author(s):  
Amin Suhadi ◽  
Seodihono
Keyword(s):  
Mechanical Properties ◽  
Cast Iron ◽  
Treatment Process ◽  
Gray Cast Iron ◽  
Spare Parts ◽  
Gray Cast ◽  
Micro Structure ◽  
Control Factors ◽  
Seed Inoculation ◽  
Casting Industry

Production technology of metal casting industry in Indonesia needs to be improved, especially in the manufacturing of spare parts and box engine made of gray cast iron which has various wall thick such as dove tale construction. Microstructure of gray cast iron is influenced by cooling rate during casting, chemical composition and melting treatment process (inoculation). The part which has the thinnest thickness has the fastest cooling therefore, the grain boundary is smaller compared to other section. As a result this part has highest hardness and difficult to be machined. This research is conducted to solve this problem by modifying melting and solidification treatment process. The research starting from micro structure analysis, composition and mechanical properties tests on the product, and then conducting modification treatment through Taguchi method approach. Experimental results obtained show that the best level settings to control factors which affect to the uniformity of the microstructure and mechanical properties in gray cast iron is the addition of seed inoculation super ® 75, as much as 0.25% with the method of inoculation material entering into the Transfer Ladle.Teknologi produksi pada industri pengecoran di Indonesia masih membutuhkan perbaikan terutama dalam pembuatan komponen mesin perkakas dan peralatan pabrik yang terbuat dari besi tuang kelabu yang mempunyai variasi ketebalan yang besar seperti konstruksi ekor burung (dove tale). Pada pengecoran, struktur mikro dari besi tuang kelabu sangat dipengaruhi oleh kecepatan pendinginan, komposisi kimia dan proses perlakuan pada logam cair (inokulasi). Bagian yang mempunyai ukuran paling tipis mempunyai kecepatan pendinigan paling tinggi karena itu ukuran butirnya jauh lebih kecil dari bagian lain, akibatnya bagian ini mempunyai kekerasan lebih tinggi dan sulit dilakukan pengerjaan mesin. Penelitian ini bertujuan untuk memperbaiki hal ini yang terjadi pada dove taledengan cara memodifikasi proses perlakuan pada cairan besi dan proses pendinginan. Penelitian dimulai dari analisa struktur mikro, pengujian komposisi kimia, pengujian sifat mekanis pada produk kemudian dilakukan modifikasi menggunakan pendekatan metode statistik Taguchi. Hasil penelitian menunjukkan bahwa pengaturan terbaik yang dapat diperoleh untuk mendapatkan keseragaman struktur mikro dan sifat mekanis pada pengecoran besi tuang kelabu adalah penambahan seed inoculation super ® 75, sebesar 0.25% dengan metode pemasukan inokulasi kedalam Ladle pengangkut logam cair.Keywords: carbon, micro structure, hardness, inoculation

Sign in / Sign up

Export Citation Format

Share Document