Gost 1 ?The State Standardization System?

1968 ◽  
Vol 11 (9) ◽  
pp. 1164-1165
2019 ◽  
Vol 119 ◽  
pp. 107-121
Author(s):  
V. V. Martynenko ◽  
L. V. Belyaeva ◽  
I. Yu. Kostyrko ◽  
T. F. Pahomova ◽  
T. P. Lytvynenko

This article includes information about development of technical specifications (TS) and changes to the TSs for refractories by institute in 2018. In 2018, the following standards were developed, agreed with enterprises in accordance with the requirements of the state standardization system and approved: one new technical specification and 14 change to TS for serial refractory products, produced by Ukrainian enterprises; 3 new TS for serial refractory products developed PrJSC “KDZ” were checked and agreed; 6 new technical specification and 11 change to the current specifications for the pilot batches of refractories manufactured by JSC “The URIR named after A. S. Berezhnoy”. Changes to technical specifications and new technical specifications have been developed in concordance with requirements of the modern system standardizations of the Ukraine (СОУ КЗПС 74.9­02568182­003:2016, ДСТУ 1.5:2015, СОУ МПП 01.120­090:2005), endorsed by manufacturers and enterprise consumers, tested for compliance with current legislation, technical regulations and regulatory documents and entered into the database «Technical conditions of Ukraine» — SE “Kharkivstandartmetrology”, and approved by the technical committee TC 7 “Refractories”. Institute plans to continue work on the development of TS and changes to the TSs for refractory products, study and analysis of the global level of standardization in the field of refractories.


2018 ◽  
Vol 118 ◽  
pp. 142-155
Author(s):  
V. V. Martynenko ◽  
L. V. Belyaeva ◽  
I. Yu. Kostyrko ◽  
T. F. Pahomova

This article includes information about development of the technical specifications (TS) and changes to the TSs for refractories by institute in 2017. In 2017 in accordance to the requirements of the state standardization system 12 change to TSs for serial refractory products, produced by Ukrainian enterprises, including verification and approval 1 change to TS for serial refractory products developed PrJSC “KDZ”, 10 TSs and 4 change to TSs for pilot batches of refractories manufactured by JSC “The URIR named after A. S. Berezhnoy” have been developed and endorsed by enterprises. Changes to technical conditions and new technical conditions developed in accordance to the requirements of modern system to standardizations of the Ukraine (SОU КZPS 74.9-02568182-003:2016, DSTU 1.5:2015, SОU MPP 01.120-090:2005), have been endorsed by manufacturers and enterprise consumers, tested for compliance with current legislation, technical regulations and regulatory documents and entered into the database “Technical conditions of Ukraine” — SE “Kharkivstandartmetrology”, and approved by the technical committee TC 7 “Refractories”. Institute plans to continue work on the development of TS and changes to the TSs for refractory products, study and analysis of the global level of standardization in the field refractories.


2017 ◽  
Vol 117 ◽  
pp. 225-237
Author(s):  
L. V. Belyayeva ◽  
I. Yu. Kostyrko ◽  
T. F. Pakhomova

This article includes information about development of technical specifications (TS) and changes to the TSs for refractories by institute in 2016. In 2016 in accordance to the requirements of the state standardization system 10 TS and 14 changes to the current TS have been developed, agreed with the companies and approved, including 7 new TS and 6 change to TS for pilot batches of refractories manufactured by PJSC “THE URIR NAMED AFTER A. S. BEREZHOY”, 3 TS and 8 change to TS for serial refractory products, produced by Ukrainian enterprises. Institute plans to continue work on the development of TS for refractory products, study and analysis of the global level of standardization in the field of refractories.


Author(s):  
T. A. Welton

Various authors have emphasized the spatial information resident in an electron micrograph taken with adequately coherent radiation. In view of the completion of at least one such instrument, this opportunity is taken to summarize the state of the art of processing such micrographs. We use the usual symbols for the aberration coefficients, and supplement these with £ and 6 for the transverse coherence length and the fractional energy spread respectively. He also assume a weak, biologically interesting sample, with principal interest lying in the molecular skeleton remaining after obvious hydrogen loss and other radiation damage has occurred.


Sign in / Sign up

Export Citation Format

Share Document