Effect of rib eccentricity on the stability of spherical shells under external pressure

1985 ◽  
Vol 21 (1) ◽  
pp. 49-54
Author(s):  
O. A. Grachev
Keyword(s):  
External Pressure ◽  
Spherical Shells ◽  
The Stability

Buckling of Circular Cylindrical Shells Using a Displacement Function

1974 ◽  
Vol 96 (4) ◽  
pp. 1322-1327
Author(s):  
Shun Cheng ◽  
C. K. Chang
Keyword(s):  
Boundary Conditions ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
External Pressure ◽  
Displacement Function ◽  
Combined Loading ◽  
Trial Solution ◽  
Governing Differential Equation ◽  
Circular Cylindrical Shells ◽  
The Stability

The buckling problem of circular cylindrical shells under axial compression, external pressure, and torsion is investigated using a displacement function φ. A governing differential equation for the stability of thin cylindrical shells under combined loading of axial compression, external pressure, and torsion is derived. A method for the solutions of this equation is also presented. The advantage in using the present equation over the customary three differential equations for displacements is that only one trial solution is needed in solving the buckling problems as shown in the paper. Four possible combinations of boundary conditions for a simply supported edge are treated. The case of a cylinder under axial compression is carried out in detail. For two types of simple supported boundary conditions, SS1 and SS2, the minimum critical axial buckling stress is found to be 43.5 percent of the well-known classical value Eh/R3(1−ν2) against the 50 percent of the classical value presently known.

Mathematical Model Establishment and Analysis on the Pipe Deformation under External Pressure with the Ovality

2013 ◽  
Vol 760-762 ◽  
pp. 2263-2266
Author(s):  
Kang Yong ◽  
Wei Chen
Keyword(s):  
Mathematical Model ◽  
Theoretical Analysis ◽  
Yield Strength ◽  
Residual Stresses ◽  
Numerical Simulations ◽  
Significant Influence ◽  
External Pressure ◽  
Pipe Diameter ◽  
Axial Loads ◽  
The Stability

Beside the residual stresses and axial loads, other factors of pipe like ovality, moment could also bring a significant influence on pipe deformation under external pressure. The Standard of API-5C3 has discussed the influences of deformation caused by yield strength of pipe, pipe diameter and pipe thickness, but the factor of ovality degree is not included. Experiments and numerical simulations show that with the increasing of pipe ovality degree, the anti-deformation capability under external pressure will become lower, and ovality affecting the stability of pipe shape under external pressure is significant. So it could be a path to find out the mechanics relationship between ovality and pipe deformation under external pressure by the methods of numerical simulations and theoretical analysis.

Modeling of External Pressure Gradient Influence on the Stability of Disturbances in the Boundary Layers of Compressed Gas

2013 ◽  
Vol 8 (4) ◽  
pp. 64-75
Author(s):  
Sergey Gaponov ◽  
Natalya Terekhova
Keyword(s):  
Mach Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Leading Edge ◽  
External Pressure ◽  
Transition To Turbulence ◽  
Compressed Gas ◽  
High Mach ◽  
The Stability ◽  
Very High

This work continues the research on modeling of passive methods of management of flow regimes in the boundary layers of compressed gas. Authors consider the influence of pressure gradient on the evolution of perturbations of different nature. For low Mach number M = 2 increase in pressure contributes to an earlier transition of laminar to turbulent flow, and, on the contrary, drop in the pressure leads to a prolongation of the transition to turbulence. For high Mach number M = 5.35 found that the acoustic disturbances exhibit a very high dependence on the sign and magnitude of the external gradient, with a favorable gradient of the critical Reynolds number becomes smaller than the vortex disturbances, and at worst – boundary layer is destabilized directly on the leading edge

Non-Linear Dynamic Stability of Shallow Reticulated Spherical Shells

2011 ◽  
Vol 142 ◽  
pp. 107-110
Author(s):  
Ming Jun Han ◽  
You Tang Li ◽  
Ping Qiu ◽  
Xin Zhi Wang
Keyword(s):  
Three Dimensional ◽  
Dynamical Equations ◽  
Third Order ◽  
Spherical Shells ◽  
Nonlinear Dynamical ◽  
Linear Dynamic ◽  
The Third ◽  
Displacement Mode ◽  
Nonlinear Forced Vibration ◽  
The Stability

The nonlinear dynamical equations are established by using the method of quasi-shells for three-dimensional shallow spherical shells with circular bottom. Displacement mode that meets the boundary conditions of fixed edges is given by using the method of the separate variable, A nonlinear forced vibration equation containing the second and the third order is derived by using the method of Galerkin. The stability of the equilibrium point is studied by using the Floquet exponent.

scholarly journals Non-linear buckling analysis of functionally graded shallow spherical shells

2009 ◽  
Vol 31 (1) ◽  
pp. 17-30 ◽  
Author(s):  
Dao Huy Bich
Keyword(s):  
External Pressure ◽  
Buckling Analysis ◽  
Functionally Graded ◽  
Power Law Distribution ◽  
Governing Equations ◽  
Spherical Shells ◽  
Buckling Loads ◽  
Linear Buckling ◽  
Non Linear ◽  
Linear Buckling Analysis

In the present paper the non-linear buckling analysis of functionally graded spherical shells subjected to external pressure is investigated. The material properties are graded in the thickness direction according to the power-law distribution in terms of volume fractions of the constituents of the material. In the formulation of governing equations geometric non-linearity in all strain-displacement relations of the shell is considered. Using Bubnov-Galerkin's method to solve the problem an approximated analytical expression of non-linear buckling loads of functionally graded spherical shells is obtained, that allows easily to investigate stability behaviors of the shell.

On the Nonlinear Analysis Methodologies for Thin Spherical Shells Under External Pressure with Different Finite-Element Codes

1989 ◽  
Vol 33 (04) ◽  
pp. 318-325
Author(s):  
Dario Boote ◽  
Donatella Mascia
Keyword(s):  
Finite Element ◽  
Numerical Procedure ◽  
External Pressure ◽  
Experimental Investigations ◽  
Nonlinear Analyses ◽  
Spherical Shells ◽  
Double Curvature ◽  
Load Carrying ◽  
Material Load ◽  
Structure Collapse

Submersible structures consist merely of simple and double curvature thin-walled shells. For this kind of structure, collapse occurs due to the combined nonlinear action of buckling and plasticity of material. Load-carrying capacity may then be assessed mainly by two approaches: experimental investigations and step-by-step numerical procedures. In nonlinear analyses, the results obtained are influenced by the magnitude of the load increment adopted. Solution procedures are then required in order to choose adequate parameters for material failure description as well as elastic nonlinearity. The aim of this paper is to carry out a suitable numerical procedure whose reliability does not depend on the finite-element code adopted.

Sign in / Sign up

Export Citation Format

Share Document