Calculation of the effect of transient temperature fields on the stressed state of thermoviscoelastic bodies

1977 ◽  
Vol 13 (7) ◽  
pp. 688-693
Author(s):  
V. G. Gromov ◽  
A. N. Rumyantsev
Keyword(s):  
Stressed State ◽  
Temperature Fields ◽  
Transient Temperature

scholarly journals Investigations on Temperature Fields during Laser Beam Melting by Means of Process Monitoring and Multiscale Process Modelling

2014 ◽  
Vol 6 ◽  
pp. 217584 ◽  
Author(s):  
J. Schilp ◽  
C. Seidel ◽  
H. Krauss ◽  
J. Weirather
Keyword(s):  
Process Monitoring ◽  
Manufacturing Process ◽  
Computation Time ◽  
Simulation Models ◽  
Process Models ◽  
Temperature Fields ◽  
Transient Temperature ◽  
Transient Temperature Field ◽  
Laser Beam Melting ◽  
Simulation Based

Process monitoring and modelling can contribute to fostering the industrial relevance of additive manufacturing. Process related temperature gradients and thermal inhomogeneities cause residual stresses, and distortions and influence the microstructure. Variations in wall thickness can cause heat accumulations. These occur predominantly in filigree part areas and can be detected by utilizing off-axis thermographic monitoring during the manufacturing process. In addition, numerical simulation models on the scale of whole parts can enable an analysis of temperature fields upstream to the build process. In a microscale domain, modelling of several exposed single hatches allows temperature investigations at a high spatial and temporal resolution. Within this paper, FEM-based micro- and macroscale modelling approaches as well as an experimental setup for thermographic monitoring are introduced. By discussing and comparing experimental data with simulation results in terms of temperature distributions both the potential of numerical approaches and the complexity of determining suitable computation time efficient process models are demonstrated. This paper contributes to the vision of adjusting the transient temperature field during manufacturing in order to improve the resulting part's quality by simulation based process design upstream to the build process and the inline process monitoring.

On Free Vibrations at Temperature-Dependent Material Properties and Transient Temperature Fields

1972 ◽  
Vol 39 (3) ◽  
pp. 723-726 ◽  
Author(s):  
U. Olsson
Keyword(s):  
Temperature Dependence ◽  
Analytical Solutions ◽  
Material Properties ◽  
Free Vibrations ◽  
Temperature Fields ◽  
Transient Temperature ◽  
Material Damping ◽  
Temperature Dependent ◽  
Temperature Variations ◽  
Damping Parameter

The influence of the temperature-dependence of the material properties on the free vibrations of transiently heated structures is investigated. Analytical solutions are given for linear, exponential, and harmonic temperature variations when the material damping parameter, Poisson’s ratio, and Young’s modulus depend on the temperature.

Laser Welding Analysis and Experiments

1995 ◽  
Vol 11 (02) ◽  
pp. 102-110 ◽  
Author(s):  
Jon J. Yagla ◽  
Richard S. Haag ◽  
Matthew E. Scott
Keyword(s):  
Laser Welding ◽  
Carbon Dioxide Laser ◽  
Mechanical Design ◽  
Steel Plates ◽  
Temperature Fields ◽  
Transient Temperature ◽  
Heating And Cooling ◽  
Transient Temperature Field ◽  
Welding Steel ◽  
Five Axis

A "seamless engineering" approach for mechanical design and laser welding manufacturing combines a method for welding analysis with a method for stress analysis through the development of radiant heating models for use in a nonlinear finite-element computer program. Experiments were performed welding steel plates, using a five-axis computer numerical controlled (CNC) workstation to translate welding specimens under a 5-kW CO2 (carbon dioxide) laser. Thermocouples installed near the weld seam were used to measure the transient temperature field during welding. The measured temperatures were compared with the analytical predictions, and the welds were sectioned so that predictions of properties in the heat-affected zone could be compared with experimental data. This paper presents analytical results using classical methods of analysis and includes solutions for temperature fields, heating and cooling rates, and metallurgical properties in heat-affected zones.

Study on Welding Deformations of Shipboard of Container Vessel

2011 ◽  
Vol 488-489 ◽  
pp. 218-221
Author(s):  
Hong Li ◽  
Da Lu Qiu ◽  
Guang Lei Li ◽  
Hui Long Ren
Keyword(s):  
Heat Flux ◽  
Heat Source ◽  
Three Dimensional ◽  
Temperature Fields ◽  
Transient Temperature ◽  
Plastic Strains ◽  
Out Of Plane ◽  
Inherent Strain ◽  
Nonlinear Behaviors ◽  
Plane Deformations

Residual plastic strains of the shipboard are the product of nonlinear behaviors during welding. Deformations of a welded shipboard injure the beauty of appearance of the ship, cause errors during the assembly of the shipboard and reduce the strength of the ship. Residual welding deformations of shipboard of a container vessel are studied in this paper. Nonlinear three dimensional transient temperature fields are analyzed by FEM first. The heat source is modeled as a moving heat flux following a Gaussian distribution. Then, applying the equivalent loads induced by the inherent strain on the shipboard, the final in-plane shrinkage and out-of-plane deformations are calculated. Being compared with the experimental results of deformations, the simulated results show mostly conformity.

scholarly journals Transient Temperature Fields in Growing Bodies Subject to Discrete and Continuous Growth Regimes

2017 ◽  
Vol 23 ◽  
pp. 120-129
Author(s):  
S. Lychev ◽  
A. Manzhirov ◽  
M. Shatalov ◽  
I. Fedotov
Keyword(s):  
Temperature Fields ◽  
Transient Temperature ◽  
Continuous Growth

Thermomechanical Design of a Heat Exchanger for a Recuperative Aeroengine

2006 ◽  
Vol 128 (4) ◽  
pp. 736-744 ◽  
Author(s):  
Harald Schoenenborn ◽  
Ernst Ebert ◽  
Burkhard Simon ◽  
Paul Storm
Keyword(s):  
Thermal Analysis ◽  
Heat Exchanger ◽  
Boundary Conditions ◽  
Stress Analysis ◽  
Element Model ◽  
Automatic Generation ◽  
Temperature Fields ◽  
Transient Temperature ◽  
Engine Operation ◽  
Aero Engines

Within the framework programs of the EU for Efficient and Environmentally Friendly Aero-Engines (EEFEA) MTU has developed a highly efficient cross-counter flow heat exchanger for the application in intercooled recuperated aeroengines. This very compact recuperator is based on the profile tube matrix arrangement invented by MTU and one of its outstanding features is the high resistance to thermal gradients. In this paper the combined thermomechanical design of the recuperator is presented. State-of-the-art calculation procedures for heat transfer and stress analysis are combined in order to perform a reliable life prediction of the recuperator. The thermal analysis is based upon a 3D parametric finite element model generation. A program has been generated, which allows the automatic generation of both the material mesh and the boundary conditions. Assumptions concerning the boundary conditions are presented as well as steady state and transient temperature results. The stress analysis is performed with a FEM code using essentially the same computational grid as the thermal analysis. With the static temperature fields the static loading of the profile tubes is determined. From transient thermal calculations successive 3D temperature fields are obtained which enable the determination of creep life and LCF life of the part. Finally, vibration analysis is performed in order to estimate the vibration stress of the profile tubes during engine operation. Together with the static stress a Goodman diagram can be constructed. The combined analysis shows the high life potential of the recuperator, which is important for economic operation of a recuperative aero-engine.

Sign in / Sign up

Export Citation Format

Share Document