Effect of strain rate on the stress-strain relationship of tensile specimens of type PN-1 binder

1972 ◽  
Vol 8 (11) ◽  
pp. 1213-1218
Author(s):  
P. G. Shishkin
Keyword(s):  
Strain Rate ◽  
Stress Strain ◽  
Strain Relationship ◽  
Relationship Of

A Statistical Constitutive Model for the Strength of Brittle Fiber at Different Strain Rates

2010 ◽  
Vol 152-153 ◽  
pp. 1213-1216
Author(s):  
Wen Huang ◽  
Zhong Wei Huang
Keyword(s):  
Constitutive Model ◽  
Strain Rate ◽  
Tensile Tests ◽  
Fiber Bundles ◽  
Strain Rates ◽  
Stress Strain ◽  
Sic Fiber ◽  
Brittle Fiber ◽  
Strain Relationship ◽  
Relationship Of

A statistical constitutive model, which takes account the effect of strain rate, was presented to describe the stress-strain relationship of brittle fiber bundles. To verify its reliability, tensile tests on two kinds of brittle fibers: glass fiber and SiC fiber, were carried out at different strain rates, and the stress-strain curves were obtained. It was found that the modulus E, the strength and the fracture strain of these fiber bundles all increase with increasing strain rate. The simulated stress-strain curves, derived from the constitutive model, fit the tested results well, which indicates that the model is valid and reliable.

scholarly journals Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6206
Author(s):  
Qian Guo ◽  
Wenbin Li ◽  
Wenjin Yao ◽  
Xiaoming Wang ◽  
Changqiang Huang
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Strain Rate ◽  
High Speed ◽  
Aluminum Foam ◽  
Structural Parameters ◽  
Stress Strain ◽  
Different Temperatures ◽  
Strain Relationship ◽  
Relationship Of

In this work, quasistatic mechanical compression experiments were used to study the stress–strain relationship of aluminum foam, and the mechanism of the compressive deformation of aluminum foam under quasistatic compression conditions is discussed based on the experimental observations. Since the interactions among cells of the aluminum foam and differences in compressive strength among cells substantially impacted the mechanical properties of the material, the cellular structural parameters, namely the cell size and cell wall thickness, were defined. Along with the mechanism of deformation of a single cell, the influence of structural parameters on the micro failure mechanism and the stress–strain relationship of the aluminum foam material was analyzed. In combination with the factors influencing the mechanical properties of the aluminum foam, a mechanical constitutive model of aluminum foam suitable for multi-density and multi-impact environments that considers cellular structure density was established to predict the complete stress–strain relationship of aluminum foam under a high strain rate. The coupling function of strain rate and temperature in the original model was verified and the parameters were determined by the compression experiments under different strain rates and different temperatures.

Mechanical Behavior Simulation of PMMA for Nano Imprint Lithography Using Molecular Dynamics

2007 ◽  
Vol 345-346 ◽  
pp. 979-982 ◽  
Author(s):  
Jung Yup Kim ◽  
Jae Hyun Kim ◽  
Byung Ik Choi
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Mechanical Strain ◽  
Process Condition ◽  
Imprint Lithography ◽  
Stress Strain ◽  
Behavior Simulation ◽  
Strain Relationship ◽  
Relationship Of ◽  
Nano Imprint

NIL(Nano Imprint Lithography) is one of the most promising lithography techniques. There are many variants of NIL, and two major techniques of them are thermal NIL and UV NIL. Here, we focus ourselves on the thermal NIL. During the thermal NIL, the polymeric patterns experience large mechanical strain and high temperature, and this often leads to malformation of polymeric patterns. So it is needed to improve the pattern fidelity and contrast, and these are believed to be closely related to the process condition and mechanical properties. In thermal NIL, PMMA is widely used and chosen as target polymer. Generally, mechanical properties in nano scale are really hard to acquire. In this study, we estimate the mechanical properties of PMMA by molecular dynamic simulation. These properties will be used as input of continuum simulation. We will estimate stress-strain relationship of PMMA. This stress-strain relationship depends on strain rate and temperature. So we will study about strain rate and temperature effect.

Semi-inverse method for predicting stress–strain relationship from cone indentations

2003 ◽  
Vol 18 (9) ◽  
pp. 2068-2078 ◽  
Author(s):  
A. DiCarlo ◽  
H. T. Y. Yang ◽  
S. Chandrasekar
Keyword(s):  
A Priori ◽  
Model Material ◽  
Material Behavior ◽  
The Finite Element Method ◽  
Stress Strain ◽  
Indentation Tests ◽  
Strain Relationship ◽  
Initial Force ◽  
Relationship Of ◽  
Force Displacement

A method for determining the stress–strain relationship of a material from hardness values H obtained from cone indentation tests with various apical angles is presented. The materials studied were assumed to exhibit power-law hardening. As a result, the properties of importance are the Young's modulus E, yield strength Y, and the work-hardening exponent n. Previous work [W.C. Oliver and G.M. Pharr, J. Mater. Res. 7, 1564 (1992)] showed that E can be determined from initial force–displacement data collected while unloading the indenter from the material. Consequently, the properties that need to be determined are Y and n. Dimensional analysis was used to generalize H/E so that it was a function of Y/E and n [Y-T. Cheng and C-M. Cheng, J. Appl. Phys. 84, 1284 (1999); Philos. Mag. Lett. 77, 39 (1998)]. A parametric study of Y/E and n was conducted using the finite element method to model material behavior. Regression analysis was used to correlate the H/E findings from the simulations to Y/E and n. With the a priori knowledge of E, this correlation was used to estimate Y and n.

Study on Stress-Strain Relationship of Loess

2004 ◽  
Vol 274-276 ◽  
pp. 241-246 ◽  
Author(s):  
Bo Han ◽  
Hong Jian Liao ◽  
Wuchuan Pu ◽  
Zheng Hua Xiao
Keyword(s):  
Stress Strain ◽  
Strain Relationship ◽  
Relationship Of

scholarly journals Simulating the Stress-Strain Relationship of Geomaterials by Support Vector Machine

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Hongbo Zhao ◽  
Zenghui Huang ◽  
Zhengsheng Zou
Keyword(s):  
Support Vector Machine ◽  
Constitutive Relationship ◽  
Support Vector ◽  
Nonlinear Relationship ◽  
Ann Model ◽  
Stress Strain ◽  
Svm Model ◽  
Strain Relationship ◽  
Artificial Neural Network Ann ◽  
Relationship Of

Stress-strain relationship of geomaterials is important to numerical analysis in geotechnical engineering. It is difficult to be represented by conventional constitutive model accurately. Artificial neural network (ANN) has been proposed as a more effective approach to represent this complex and nonlinear relationship, but ANN itself still has some limitations that restrict the applicability of the method. In this paper, an alternative method, support vector machine (SVM), is proposed to simulate this type of complex constitutive relationship. The SVM model can overcome the limitations of ANN model while still processing the advantages over the traditional model. The application examples show that it is an effective and accurate modeling approach for stress-strain relationship representation for geomaterials.

Sign in / Sign up

Export Citation Format

Share Document