Application of array data processing techniques to a network of ordinary seismograph stations

1968 ◽  
Vol 69 (1) ◽  
pp. 80-99 ◽  
Author(s):  
Bo Jansson ◽  
Eystein S. Husebye
1974 ◽  
Vol 64 (3-1) ◽  
pp. 637-656 ◽  
Author(s):  
H. Bungum ◽  
E. S. Husebye

abstract Based on 1 year of data, April 1972-March 1973, the routine event detectability of the NORSAR array in Norway has been investigated in terms of 50 and 90 per cent cumulative detectability thresholds which were derived from frequency-magnitude distributions. The best performance was observed for events in central Asia and adjacent regions where the 90 per cent cumulative detectability values are in the range 3.6-3.8 NORSAR mb values. For teleseismic events, the value is 3.8. For all regions, NOAA reports on the average a larger mb value than NORSAR, and this relationship is magnitude-dependent. The accuracy of NORSAR-estimated epicenter solutions as compared to those of NOAA was also investigated. The best results were found for Japan and central Asia, where the median location difference is 95 and 105 km, respectively. For teleseismic events, the value is 145 km. The biased errors in the location estimates are demonstrated to have been eliminated for most of the regions considered. Finally, improvements of the present NORSAR event detectability performance are discussed in view of recently developed array data processing techniques.


2006 ◽  
Vol 46 (9) ◽  
pp. S693-S707 ◽  
Author(s):  
P Varela ◽  
M.E Manso ◽  
A Silva ◽  
the CFN Team ◽  
the ASDEX Upgrade Team

1988 ◽  
Vol 84 (S1) ◽  
pp. S16-S16
Author(s):  
David V. Wyllie ◽  
Brian G. Ferguson ◽  
Garry C. Speechley

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 3966
Author(s):  
Luigi Carassale ◽  
Elena Rizzetto

Bladed disks are key components of turbomachines and their dynamic behavior is strongly conditioned by their small accidental lack of symmetry referred to as blade mistuning. The experimental identification of mistuned disks is complicated due to several reasons related both to measurement and data processing issues. This paper describes the realization of a test rig designed to investigate the behavior of mistuned disks and develop or validate data processing techniques for system identification. To simplify experiments, using the opposite than in the real situation, the disk is fixed, while the excitation is rotating. The response measured during an experiment carried out in the resonance-crossing condition is used to compare three alternative techniques to estimate the frequency-response function of the disk.


Sign in / Sign up

Export Citation Format

Share Document