Improvements in the dynamic thermocouple technique

1976 ◽  
Vol 30 (3) ◽  
pp. 311-314 ◽  
Author(s):  
S. P. Polyakov ◽  
P. F. Bulanyi
Keyword(s):  
Dynamic Thermocouple

Moving dynamic thermocouple

1983 ◽  
Vol 45 (1) ◽  
pp. 801-806
Author(s):  
S. P. Polyakov
Keyword(s):  
Dynamic Thermocouple

scholarly journals Basic study on measurement of surface temperature at high contact pressure by dynamic thermocouple with dissimilar hardened gears

2017 ◽  
Vol 83 (854) ◽  
pp. 17-00272-17-00272 ◽  
Author(s):  
Yasuyoshi TOZAKI ◽  
Naoya MATSUSHITA ◽  
Yuuji SUMITANI ◽  
Takuya GOTO ◽  
Tomoyuki TANAKA
Keyword(s):  
Surface Temperature ◽  
Contact Pressure ◽  
Basic Study ◽  
Dynamic Thermocouple ◽  
High Contact Pressure

Surface Temperature and Scoring Resistance of Heavy-Duty Gears

1974 ◽  
Vol 96 (2) ◽  
pp. 385-390 ◽  
Author(s):  
Jiro Ishikawa ◽  
Kunikazu Hayashi ◽  
Masaaki Yokoyama
Keyword(s):  
Surface Temperature ◽  
Spur Gear ◽  
Heavy Duty ◽  
Gear Teeth ◽  
Dynamic Thermocouple ◽  
Thermocouple Method ◽  
Scoring Resistance ◽  
Experimental Equation

The surface temperature on spur gear teeth is measured by the newly developed dynamic thermocouple method. From a large number of the results an experimental equation for the surface temperature is obtained. The effect of tip relief on the surface tempera-perature rise is also studied.

Comparison of Theories and Experimental Results for Surface Temperature of Spur Gear Teeth

1974 ◽  
Vol 96 (1) ◽  
pp. 41-50 ◽  
Author(s):  
Yoshio Terauchi ◽  
Hidetaro Mori
Keyword(s):  
Surface Temperature ◽  
Spur Gear ◽  
Experimental Results ◽  
Dynamic Loads ◽  
Gear Teeth ◽  
Transmission Errors ◽  
Temperature Discontinuity ◽  
Dynamic Thermocouple ◽  
Scoring Resistance ◽  
Good Coincidence

The surface temperature of gear teeth is one of the important factors for evaluating the scoring resistance of a gear. In a present paper, the comparison of numerically calculated value with experimentally measured value is reported. The calculation of surface temperature was performed with the following procedure. First, the dynamic loads applied to gear teeth were calculated in consideration of the variation of different factors, for instance transmission errors of test gears and total stiffness of gear teeth. Second, under the condition that there must be no temperature discontinuity over the contact zone of sliding surfaces, the temperature distribution over the contact area was calculated. On the other hand, the measurement of surface temperature was performed using the meshing gears themselves as a dynamic thermocouple. The results of numerical solution by means of a digital computer are in fairly good coincidence with the experimental results.

Improvement of the dynamic thermocouple method

1980 ◽  
Vol 38 (2) ◽  
pp. 161-164
Author(s):  
S. P. Polyakov ◽  
G. A. Pozdeev
Keyword(s):  
Dynamic Thermocouple ◽  
Thermocouple Method

On Temperature Transients at Sliding Interface

1969 ◽  
Vol 91 (3) ◽  
pp. 397-405 ◽  
Author(s):  
F. F. Ling
Keyword(s):  
Experimental Investigation ◽  
Theoretical Model ◽  
Stochastic Model ◽  
Sliding Contact ◽  
Interface Temperature ◽  
Temperature Level ◽  
Dynamic Thermocouple ◽  
Thermocouple Method ◽  
Two Temperatures ◽  
Simple Stochastic Model

A simple stochastic model of interface temperature of solids in sliding contact, introduced earlier, has been extended. An experimental investigation has also been carried out, the result of which seems to lend credence to the theoretical model. The model led to the observation that, statistically, there are two temperatures at the interface, both being transients. The first is the average over the geometric contact area at all times, the temperature that is most likely to be measured by dynamic thermocouple method. The second is the time and space average over the instantaneous contacts. It is suggested that, as often as not, it is the latter which should be the reference temperature level upon which activities at the interface depend.

Basic study on measurement of surface temperature by dynamic thermocouple with hardened helical gears

2018 ◽  
Vol 2018 (0) ◽  
pp. S1120204
Author(s):  
Yasuyoshi TOZAKI ◽  
Takuya GOTO ◽  
Tomoaki NARA ◽  
Ryota HOSAKA ◽  
Keisuke OGURI
Keyword(s):  
Surface Temperature ◽  
Basic Study ◽  
Helical Gears ◽  
Dynamic Thermocouple
Sign in / Sign up

Export Citation Format

Share Document