State of stress deformation of an orthotropic fiberglass shell in consideration of the creep of the material

1973 ◽  
Vol 6 (3) ◽  
pp. 483-485
Author(s):  
A. L. Tunik ◽  
V. S. Ekel'chik
Keyword(s):  
State Of Stress ◽  
Fiberglass Shell ◽  
Stress Deformation

Sensitivity analysis of sandwich beams and plates accounting for variable support conditions

2013 ◽  
Vol 61 (1) ◽  
pp. 201-210 ◽  
Author(s):  
R. Studziński ◽  
Z. Pozorski ◽  
A. Garstecki
Keyword(s):  
Sensitivity Analysis ◽  
Adjoint Variable Method ◽  
Adjoint Variable ◽  
Practical Applications ◽  
The Core ◽  
State Of Stress ◽  
Thin Steel ◽  
Influence Of Temperature On ◽  
Support Conditions ◽  
Variable Support

Abstract The paper addresses the problems of the sensitivity analysis and optimal design of multi-span sandwich panels with a soft core and flat thin steel facings. The response functional is formulated in a general form allowing wide practical applications. Sensitivity gradients of this functional with respect to dimensional, material and support parameters are derived using adjoint variable method. These operators account for the jump of the slope of a Timoshenko beam or a Reissner plate at the position of concentrated active load or reaction, thus extending the sensitivity operators known in literature. The jump of slope is the effect of shear deformation of the core. Special attention is focussed on sensitivity and optimisation allowing for variable support position and stiffness, because local phenomena observed in supporting area of sandwich plates often initiate failure mechanisms. Introducing optimally located elastic supports allows to reduce the unfavourable influence of temperature on the state of stress. Several examples illustrate the application of derived sensitivity operators and demonstrate their exactness

The Influence of Loads Superposition, Deterioration Due to Cracks and Residual Stresses on the Strength of Tubular Junction

2017 ◽  
Vol 68 (6) ◽  
pp. 1267-1273
Author(s):  
Valeriu V. Jinescu ◽  
Angela Chelu ◽  
Gheorghe Zecheru ◽  
Alexandru Pupazescu ◽  
Teodor Sima ◽  
...  
Keyword(s):  
Stress Concentration ◽  
Residual Stresses ◽  
Bending Moment ◽  
Combined Loading ◽  
Torsional Moment ◽  
Calculation Methods ◽  
State Of Stress ◽  
Cracked Structures ◽  
Total Participation ◽  
Theoretical Results

In the paper the interaction of several loads like pressure, axial force, bending moment and torsional moment are analyzed, taking into account the deterioration due to cracks and the influence of residual stresses. A nonlinear, power law, of structure material is considered. General relationships for total participation of specific energies introduced in the structure by the loads, as well as for the critical participation have been proposed. On these bases: - a new strength calculation methods was developed; � strength of tubular cracked structures and of cracked tubular junction subjected to combined loading and strength were analyzed. Relationships for critical state have been proposed, based on dimensionless variables. These theoretical results fit with experimental date reported in literature. On the other side stress concentration coefficients were defined. Our one experiments onto a model of a pipe with two opposite nozzles have been achieved. Near one of the nozzles is a crack on the run pipe. Trough the experiments the state of stress have been obtained near the tubular junction, near the tip of the crack and far from the stress concentration points. On this basis the stress concentration coefficients were calculated.

State of Stress in the Near-Contact Region of a Semiconductor during Metallization Track Electrodegradation

2020 ◽  
Vol 2020 (13) ◽  
pp. 1658-1662
Author(s):  
A. A. Skvortsov ◽  
S. M. Zuev ◽  
M. V. Koryachko ◽  
E. B. Voloshinov
Keyword(s):  
Contact Region ◽  
State Of Stress

scholarly journals Half-plane contacts subject to remote tension

2021 ◽  
pp. 030932472098844
Author(s):  
Nils Cwiekala ◽  
David A Hills
Keyword(s):  
Contact Problem ◽  
Half Plane ◽  
Asymptotic Form ◽  
Fretting Fatigue ◽  
The State ◽  
Partial Slip ◽  
Practical Relevance ◽  
Plane Contact ◽  
State Of Stress ◽  
Plane Contact Problem

The state of stress present in an elastic half-plane contact problem, where one or both bodies is subject to remote tension has been investigated, both for conditions of full stick and partial slip. The state of stress present near the contact edges is studied for different loading scenarios in an asymptotic form. This is of practical relevance to the study of contacts experiencing fretting fatigue, and enables the environment in which cracks nucleate to be specified.

scholarly journals An Overview of Fatigue Testing Systems for Metals under Uniaxial and Multiaxial Random Loadings

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 447
Author(s):  
Julian M. E. Marques ◽  
Denis Benasciutti ◽  
Adam Niesłony ◽  
Janko Slavič
Keyword(s):  
Fatigue Testing ◽  
Local State ◽  
Specimen Geometry ◽  
Present Review ◽  
General Criterion ◽  
Classification Criterion ◽  
Test Type ◽  
State Of Stress ◽  
The Relationship

This paper presents an overview of fatigue testing systems in high-cycle regime for metals subjected to uniaxial and multiaxial random loadings. The different testing systems are critically discussed, highlighting advantages and possible limitations. By identifying relevant features, the testing systems are classified in terms of type of machine (servo-hydraulic or shaker tables), specimen geometry and applied constraints, number of load or acceleration inputs needed to perform the test, type of loading acting on the specimen and resulting state of stress. Specimens with plate, cylindrical and more elaborated geometry are also considered as a further classification criterion. This review also discusses the relationship between the applied input and the resulting local state of stress in the specimen. Since a general criterion to classify fatigue testing systems for random loadings seems not to exist, the present review—by emphasizing analogies and differences among various layouts—may provide the reader with a guideline to classify future equipment.

scholarly journals Effect of the Rock Stress on the Water Jet Cutting Performance

2021 ◽  
Author(s):  
Battista Grosso ◽  
Valentina Dentoni ◽  
Augusto Bortolussi
Keyword(s):  
Numerical Models ◽  
Step Function ◽  
Water Jet ◽  
The State ◽  
Cutting Performance ◽  
Lagrangian Analysis ◽  
State Of Stress ◽  
Water Jet Cutting ◽  
Cutting Rate ◽  
Available Technology

AbstractUnderground quarrying is rarely adopted for granite extraction due to the difficulties in the implementation of traditional technologies (drilling and explosive). As alternative to drilling and explosive, the combination of diamond wire and water jet seems to be the most promising available technology. The cutting performance achievable with the water jet technology depends on the operative parameters, the material characteristics and the state of stress within the rock massif. To assess the effect of the state of stress on the cutting rate, laboratory tests have been performed with an oscillating water jet machine on granite samples subjected to a static load. The stress distribution in the layer of rock to be removed has been evaluated by numerical simulation with the FLAC code (Fast Lagrangian Analysis of Continua). The correlation between the results of the cutting tests and the numerical models of the rock samples has been inferred. Starting from a conceptual model, which theoretically describes the relationship between the cutting rate and the stress, a step function was defined that indicates the ranges of stress where predefined values of the cutting rate are workable.

scholarly journals Geophysical and analytical determination of overstressed zones in exploited coal seam: a case study

2021 ◽  
Author(s):  
Dariusz Chlebowski ◽  
Zbigniew Burtan
Keyword(s):  
Coal Seam ◽  
Wave Velocity ◽  
Seismic Tomography ◽  
Analytical Modeling ◽  
Coal Mines ◽  
Vertical Stress ◽  
P Wave ◽  
Rockburst Hazard ◽  
State Of Stress ◽  
P Wave Velocity

AbstractA variety of geophysical methods and analytical modeling are applied to determine the rockburst hazard in Polish coal mines. In particularly unfavorable local conditions, seismic profiling, active/passive seismic tomography, as well as analytical state of stress calculating methods are recommended. They are helpful in verifying the reliability of rockburst hazard forecasts. In the article, the combined analysis of the state of stress determined by active seismic tomography and analytical modeling was conducted taking into account the relationship between the location of stress concentration zones and the level of rockburst hazard. A longwall panel in the coal seam 501 at a depth of ca.700 m in one of the hard coal mines operating in the Upper Silesian Coal Basin was a subject of the analysis. The seismic tomography was applied for the reconstruction of P-wave velocity fields. The analytical modeling was used to calculate the vertical stress states basing on classical solutions offered by rock mechanics. The variability of the P-wave velocity field and location of seismic anomaly in the coal seam in relation to the calculated vertical stress field arising in the mined coal seam served to assess of rockburst hazard. The applied methods partially proved their adequacy in practical applications, providing valuable information on the design and performance of mining operations.

scholarly journals Sub-Level Stoping in an Underground Limestone Quarry: An Analysis of the State of Stress in an Evolutionary Scenario

2016 ◽  
Vol 61 (1) ◽  
pp. 199-216 ◽  
Author(s):  
Marilena Cardu ◽  
Sergio Dipietromaria ◽  
Pierpaolo Oreste
Keyword(s):  
Numerical Models ◽  
The State ◽  
In Situ Tests ◽  
Future Scenario ◽  
Limestone Quarry ◽  
Geomechanical Properties ◽  
State Of Stress ◽  
Upper Level ◽  
Pillar Structure

Abstract The aim of this study was to evaluate the state of stress of a „voids-pillar“ structure excavated by means of the sub-level stoping method in an underground limestone quarry near Bergamo (Italy). Both the current structure of the quarry (i.e. the rooms exploited till now) and a possible future scenario were analysed using the (FDM) FLAC 2D code. The quarry has been in operation since 1927; at present, exploitation is carried out underground via the sub-level stoping method. Exploitation involves two levels, with 5 rooms on the upper level and 9 rooms on the lower level. After analysing data obtained from laboratory and in situ tests carried out on rock samples and natural discontinuities, the geomechanical properties of the medium, knowledge of which is essential in order to establish the parameters that must be included in the numerical model, were evaluated. The implementation of three numerical models made it possible to study both the present conditions of quarry exploitation and the evolution of the exploited rooms, as well as a possible expansion involving a third level of rooms. Using the results obtained regarding the stress-strain present in the pillars, a potential change in room geometry was proposed aimed at reducing the stress state inside the pillars, decreasing plasticity and increasing overall quarry safety.

Sign in / Sign up

Export Citation Format

Share Document