Investigation of the natural vibrations of plates made of composite materials with the help of the finite-element method

1977 ◽  
Vol 12 (2) ◽  
pp. 245-249
Author(s):  
A. S. Vol'mir ◽  
V. A. Smetanenko
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Composite Materials ◽  
The Finite Element Method ◽  
Natural Vibrations ◽  
Element Method

Simulation of the Co-Extrusion of Hybrid Mg/Al Profiles

2009 ◽  
Vol 424 ◽  
pp. 113-119 ◽  
Author(s):  
Jerome Muehlhause ◽  
Sven Gall ◽  
Sören Müller
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Composite Materials ◽  
Material Flow ◽  
Extrusion Process ◽  
The Finite Element Method ◽  
Porthole Die ◽  
Single Production ◽  
Element Method

Extrusion of composite materials can offer big advantages. In this work the manufacturing of a hybrid metal profile in a single production step was investigated. A porthole die was used, thus producing profiles with extrusion seams. Along the seams a material mix up was visible. The extrusion process was simulated with the Finite Element Method to investigate the material flow in die and welding chamber in order to understand the cause for the defects at the seams.

scholarly journals Application of Failure Criteria on Plywood under Bending

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4449
Author(s):  
Miran Merhar
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
Composite Materials ◽  
Maximum Stress ◽  
Failure Criteria ◽  
The Finite Element Method ◽  
Stress Criterion ◽  
Composite Modulus ◽  
Element Method

In composite materials, the use of failure criteria is necessary to determine the failure forces. Various failure criteria are known, from the simplest ones that compare individual stresses with the corresponding strength, to more complex ones that take into account the sign and direction of the stress, as well as mutual interactions of the acting stresses. This study investigates the application of the maximum stress, Tsai-Hill, Tsai-Wu, Puck, Hoffman and Hashin criteria to beech plywood made from a series of plies of differently oriented beech veneers. Specimens were cut from the manufactured boards at various angles and loaded by bending to failure. The mechanical properties of the beech veneer were also determined. The specimens were modelled using the finite element method with a composite modulus and considering the different failure criteria where the failure forces were calculated and compared with the measured values. It was found that the calculated forces based on all failure criteria were lower than those measured experimentally. The forces determined using the maximum stress criterion showed the best agreement between the calculated and measured forces.

scholarly journals Application of the Finite Element Method in the Analysis of Composite Materials: A Review

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 818 ◽  
Author(s):  
Sarah David Müzel ◽  
Eduardo Pires Bonhin ◽  
Nara Miranda Guimarães ◽  
Erick Siqueira Guidi
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Composite Materials ◽  
Mechanical Characteristics ◽  
Failure Criteria ◽  
Point Of View ◽  
The Finite Element Method ◽  
Industrial Sectors ◽  
Different Levels ◽  
Element Method

The use of composite materials in several sectors, such as aeronautics and automotive, has been gaining distinction in recent years. However, due to their high costs, as well as unique characteristics, consequences of their heterogeneity, they present challenging gaps to be studied. As a result, the finite element method has been used as a way to analyze composite materials subjected to the most distinctive situations. Therefore, this work aims to approach the modeling of composite materials, focusing on material properties, failure criteria, types of elements and main application sectors. From the modeling point of view, different levels of modeling—micro, meso and macro, are presented. Regarding properties, different mechanical characteristics, theories and constitutive relationships involved to model these materials are presented. The text also discusses the types of elements most commonly used to simulate composites, which are solids, peel, plate and cohesive, as well as the various failure criteria developed and used for the simulation of these materials. In addition, the present article lists the main industrial sectors in which composite material simulation is used, and their gains from it, including aeronautics, aerospace, automotive, naval, energy, civil, sports, manufacturing and even electronics.

Sign in / Sign up

Export Citation Format

Share Document