Quantitative description of spall damage

1975 ◽  
Vol 14 (6) ◽  
pp. 850-852 ◽  
Author(s):  
B. A. Tarasov
Keyword(s):  
Quantitative Description ◽  
Spall Damage

High-resolution observations of metastable γ’ precipitation in Al-15at.%Ag

1996 ◽  
Vol 54 ◽  
pp. 1004-1005
Author(s):  
N. V. Larcher ◽  
I. G. Solorzano
Keyword(s):  
Discontinuous Precipitation ◽  
Equilibrium Phase ◽  
Quantitative Description ◽  
Present Contribution ◽  
Α Phase ◽  
The Matrix ◽  
Aging Sequence ◽  
Matrix Precipitation ◽  
Considerable Detail ◽  
Kinetics Of

It is currently well established that, for an Al-Ag alloy quenched from the α phase and aged within the metastable solvus, the aging sequence is: supersaturated α → GP zones → γ’ → γ (Ag2Al). While GP zones and plate-shaped γ’ are metastable phases, continuously distributed in the matrix, formation of the equilibrium phase γ takes place at grain boundaries by discontinuous precipitation (DP). The crystal structure of both γ’ and γ is hep with the following orientation relationship with respect to the fee α matrix: {0001}γ′,γ // {111}α, <1120>γ′,γ, // <110>α.The mechanisms and kinetics of continuous matrix precipitation (CMP) in dilute Al-Ag alloys have been studied in considerable detail. The quantitative description of DP kinetics, however, has received less attention. The present contribution reports the microstructural evolution resulting from aging an Al-Ag alloy with Ag content higher than those previously reported in the literature, focusing the observations of γ' plate-shaped metastable precipitates.

Tingkat Pemahaman Kompetensi Guru Pada Mahasiswa Pendidikan Geografi Sebagai Calon Guru Geografi

2020 ◽  
Vol 21 (1) ◽  
pp. 102-117
Author(s):  
Novia Zalmita ◽  
Muhajirah Muhajirah ◽  
Abdul Wahab Abdi
Keyword(s):  
Prospective Teachers ◽  
Prospective Teacher ◽  
Quantitative Description ◽  
Population Data ◽  
Geography Education ◽  
Teacher Competence ◽  
Education Department ◽  
Long Time

One that influences human resource indicators is education. The teacher is a profession as a job of academic specialization in a relatively long time in college. Understanding related to teacher competence is very important to have by a prospective teacher because it can affect the quality of performance as a professional teacher. The teacher's competence is known as pedagogic, professional, social and personality competencies. The issue in this study is how the competency of the teacher of the Department of Geography Education FKIP Unsyiah as a prospective teacher of geography? The purpose of this study was to determine the competence of teachers in the Department of Geography Education FKIP Unsyiah as prospective geography teachers. Quantitative description approach is used in this study to find answers to the issue. The population in this study were students of the Department of Geography Education FKIP Unsyiah class of 2015 and 2016 who had been declared to have passed the Micro Teaching and Magang Kependidikan 3 course totaling 50 people. Because the population is small and can be reached, the determination of the sample using total sampling techniques so that the sample in this study is the whole population. Data collection is done by distributing test questions to respondents. The data was analyzed using the descriptive statistics percentage formula. The results of the study indicate that the level of teacher competence of Geography Education Department students as prospective teachers is in the moderate category, namely as many as 22 respondents (44%). A total of 12 respondents (24%) were in the high category, 15 respondents (30%) were in the low category and 1 respondent (2%) were in the very low category.

On a Certain Probability Approach to the Quantitative Description of Dynamics of Natural Processes

1998 ◽  
Vol 30 (1) ◽  
pp. 51-69
Author(s):  
A. V. Kryazhimskii ◽  
V. I. Maksimov ◽  
A. A. Solov'ev ◽  
Alexander G. Chentsov
Keyword(s):  
Quantitative Description ◽  
Natural Processes ◽  
Probability Approach

Data-Driven Many-Body Models with Chemical Accuracy for CH4/H2O Mixtures

2020 ◽  
Author(s):  
Marc Riera ◽  
Alan Hirales ◽  
Raja Ghosh ◽  
Francesco Paesani
Keyword(s):  
Liquid Phase ◽  
Quantitative Description ◽  
Liquid Mixtures ◽  
Many Body ◽  
Energy Functions ◽  
Potential Energy Functions ◽  
Dynamics Simulations ◽  
Body Potential ◽  
Small Clusters ◽  
Many Body Interactions

<div> <div> <div> <p>Many-body potential energy functions (PEFs) based on the TTM-nrg and MB-nrg theoretical/computational frameworks are developed from coupled cluster reference data for neat methane and mixed methane/water systems. It is shown that that the MB-nrg PEFs achieve subchemical accuracy in the representation of individual many-body effects in small clusters and enables predictive simulations from the gas to the liquid phase. Analysis of structural properties calculated from molecular dynamics simulations of liquid methane and methane/water mixtures using both TTM-nrg and MB-nrg PEFs indicates that, while accounting for polarization effects is important for a correct description of many-body interactions in the liquid phase, an accurate representation of short-range interactions, as provided by the MB-nrg PEFs, is necessary for a quantitative description of the local solvation structure in liquid mixtures. </p> </div> </div> </div>

NILAI KERJA DITINJAU DARI ETNIS BATAK TOBA PADA ANGGOTA SATUAN BRIGADE MOBILE KEPOLISIAN DAERAH SUMATERA UTARA

2019 ◽  
Vol 4 (1) ◽  
pp. 8-14
Author(s):  
Debi Angelina Br. Barus
Keyword(s):  
Work Values ◽  
Quantitative Description ◽  
The North ◽  
Work Value ◽  
Toba Batak ◽  
Relationship Of ◽  
The Relationship ◽  
North Sumatra

This study aims to determine the relationship of work values with the Batak Toba ethnic. This research was conducted at the Mobile Brigade Unit of the North Sumatra Regional Police. The subjects in this study were 45 people. This study uses a quantitative description approach. The results of the study are to find that hamoraon, hagabeon and hasangapon (3H) are in line with the principle of the work value of Brimob members. 3H is the peak achievement of individual Toba Batak ethnic work value in the mobile brigade unit of the North Sumatra regional police. Keyword: Work value, Batak Toba Etnic   Penelitian ini bertujuan untuk mengetahui hubungan nilai kerja dengan etnis Batak Toba. Penelitian ini dilakukan di Satuan Brigade Mobile Kepolisian Daerah Sumatera Utara. Subjek dalam penelitian ini adalah 45 orang. Penelitian ini menggunakan pendekatan kuantitatif deskripsi. Hasil penelitian adalah menemukan bahwa hamoraon, hagabeon dan hasangapon (3H) sejalan dengan prinsip nilai kerja pada satuan anggota Brimob. 3H merupakan puncak pencapaian dari nilai kerja individu yang beretnis Batak Toba di satuan brigade mobile kepolisian daerah Sumatera Utara. Kata Kunci: Nilai kerja, Etnis Batak Toba

FEATURES OF WIND FIELD OVER THE SEA SURFACE IN THE COASTAL AREA BASED ON SAR OBSERVATIONS

2017 ◽  
Author(s):  
Anna Monzikova ◽  
Anna Monzikova ◽  
Vladimir Kudryavtsev Vladimir ◽  
Vladimir Kudryavtsev Vladimir ◽  
Alexander Myasoedov ◽  
...  
Keyword(s):  
Wind Stress ◽  
Surface Wind ◽  
Quantitative Description ◽  
Energy Resource ◽  
Resource Assessment ◽  
Internal Boundary Layer ◽  
Offshore Wind ◽  
Internal Boundary ◽  
Sar Images ◽  
Surface Wind Stress

“Wind-shadowing” effects in the Gulf of Finland coastal zone are analyzed using high resolution Envisat Synthetic Aperture Radar (SAR) measurements and model simulations. These effects are related to the internal boundary layer (IBL) development due to abrupt change the surface roughness at the sea-land boundary. Inside the "shadow" areas the airflow accelerates and the surface wind stress increases with the fetch. Such features can be revealed in SAR images as dark areas adjacent to the coastal line. Quantitative description of these effects is important for offshore wind energy resource assessment. It is found that the surface wind stress scaled by its equilibrium value (far from the coast) is universal functions of the dimensionless fetch Xf/G. Wind stress reaches an equilibrium value at the distance Xf/G of about 0.4.

A polycentric growth model of gallium arsenide epitaxial layers from the gas phase with simultaneous diffusion, adsorption and chemical reaction

1988 ◽  
Vol 53 (12) ◽  
pp. 2995-3013
Author(s):  
Emerich Erdös ◽  
Jindřich Leitner ◽  
Petr Voňka ◽  
Josef Stejskal ◽  
Přemysl Klíma
Keyword(s):  
Growth Rate ◽  
Gallium Arsenide ◽  
Epitaxial Growth ◽  
Gas Phase ◽  
Surface Reaction ◽  
Quantitative Description ◽  
The Other ◽  
Rate Equations ◽  
Impact Interaction ◽  
Partial Pressures

For a quantitative description of the epitaxial growth rate of gallium arsenide, two models are proposed including two rate controlling steps, namely the diffusion of components in the gas phase and the surface reaction. In the models considered, the surface reaction involves a reaction triple - or quadruple centre. In both models three mechanisms are considered which differ one from the other by different adsorption - and impact interaction of reacting particles. In every of the six cases, the pertinent rate equations were derived, and the models have been confronted with the experimentally found dependences of the growth rate on partial pressures of components in the feed. The results are discussed with regard to the plausibility of individual mechanisms and of both models, and also with respect to their applicability and the direction of further investigations.

Chemometric Analysis of Substituent Effects. VII. Inductive Effect as a Basic Substituent Effect. Isoeffect Substituent Constant

1995 ◽  
Vol 60 (8) ◽  
pp. 1316-1332 ◽  
Author(s):  
Oldřich Pytela ◽  
Aleš Halama
Keyword(s):  
Inductive Effect ◽  
Chemical Shifts ◽  
Quantitative Description ◽  
Substituent Effects ◽  
Intersection Point ◽  
Chemometric Analysis ◽  
Reaction Centre ◽  
Substituent Constant ◽  
Modified Method ◽  
Substituted Benzoic Acids

The paper deals with chemometric analysis of the inductive effect. The notion of inductive effect is discussed, and unambiguous definitions are given for the notions of triad: reaction centre-basic skeleton-substituent, and the therewith connected definitions of inductive effect. For a quantitative description of inductive effect 7 types of chemical models were selected including noncyclic compounds, cyclic, and bicyclic compounds, derivatives of quinuclidine, 3-substituted benzoic acids, sulfonamides and pyridines. Altogether 139 sets of experimental data from literature have been used including altogether 1 294 points (9.3 points per set, 5 points at least) reflecting substituent effects of 34 substituents. It has been found that for a standard model the dissociation of substituted bicycloalkanecarboxylic acids only is satisfactory, all the other models reflecting also the mesomeric effects to variable extent (up to 10%). A distinctly different substitution behaviour was observed with 19F and 13C NMR chemical shifts of 4-substituted 1-fluoro- or 1-methylbicyclo[2.2.2]octanes. The earlier suggested model of substituent effects based on different way of transmission of substituent effects (3 classes) has been used for separating the inductive and mesomeric effects: it is mathematically presented as a set of straight lines with the intersection point at the so-called isoeffect substituent constant. Using the modified method of conjugated deviations a chemometric scale has been created for the inductive effect which agrees very well with the conventional scales given in literature; the only differences were observed for F and CH=O substituents (which are overestimated and underestimated, respectively, in literature). In the context given the inductive effect appears as a fundamental quantity forming a basis for quantitative description of other effects transferred by electrons.

A Flatness Control System Design Based on Actuator Efficiency Factors for Cold Rolling Mill

2010 ◽  
Vol 139-141 ◽  
pp. 1889-1893 ◽  
Author(s):  
Peng Fei Wang ◽  
Dian Hua Zhang ◽  
Xu Li ◽  
Jia Wei Liu
Keyword(s):  
Control System ◽  
Rolling Force ◽  
Quantitative Description ◽  
Learning Model ◽  
Feed Forward Control ◽  
Flatness Control ◽  
Stand Type ◽  
Loop Feedback ◽  
Efficiency Factors ◽  
Self Learning

In order to improve the flatness of cold rolled strips, strategies of closed loop feedback flatness control and rolling force feed forward control were established respectively, based on actuator efficiency factors. As the basis of flatness control system, efficiencies of flatness actuators provide a quantitative description to the law of flatness control. For the purpose of obtaining accurate efficiency factors matrixes of actuators, a self-learning model of actuator efficiency factors was established. The precision of actuator efficiency factors could be improved continuously by correlative measurement flatness data inputs. Meanwhile, the self-learning model of actuator efficiency factors permits the application of this flatness control for all possible types of actuators and every stand type. The developed flatness control system has been applied to a 1250mm single stand 6-H reversible UCM cold mill. Applications show that the flatness control system based on actuator efficiency factors is capable to obtain good flatness.

Sign in / Sign up

Export Citation Format

Share Document