Influence of fluctuations of the heat-transfer coefficient on the temperature and thermal stresses in a plate quenched in a vibrating fluidized bed of a disperse material

1984 ◽  
Vol 46 (5) ◽  
pp. 601-604
Author(s):  
N. V. Antonishin ◽  
M. A. Geller ◽  
A. L. Parnas
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Fluidized Bed ◽  
Thermal Stresses ◽  
Disperse Material ◽  
The Heat Transfer Coefficient

Identification of three-dimensional transient temperature fields in thick-walled elements using the inverse method

2018 ◽  
Vol 28 (1) ◽  
pp. 138-150 ◽  
Author(s):  
Magdalena Jaremkiewicz
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Inverse Method ◽  
Thermal Stresses ◽  
Computing Time ◽  
Transient Temperature ◽  
Content Type ◽  
Inner Surface ◽  
The Heat Transfer Coefficient

Purpose The purpose of this paper is to propose a method of determining the transient temperature of the inner surface of thick-walled elements. The method can be used to determine thermal stresses in pressure elements. Design/methodology/approach An inverse marching method is proposed to determine the transient temperature of the thick-walled element inner surface with high accuracy. Findings Initially, the inverse method was validated computationally. The comparison between the temperatures obtained from the solution for the direct heat conduction problem and the results obtained by means of the proposed inverse method is very satisfactory. Subsequently, the presented method was validated using experimental data. The results obtained from the inverse calculations also gave good results. Originality/value The advantage of the method is the possibility of determining the heat transfer coefficient at a point on the exposed surface based on the local temperature distribution measured on the insulated outer surface. The heat transfer coefficient determined experimentally can be used to calculate thermal stresses in elements with a complex shape. The proposed method can be used in online computer systems to monitor temperature and thermal stresses in thick-walled pressure components because the computing time is very short.

scholarly journals Online Determining Heat Transfer Coefficient for Monitoring Transient Thermal Stresses

Energies ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 704
Author(s):  
Magdalena Jaremkiewicz ◽  
Jan Taler
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Thermal Stresses ◽  
Thermal Power ◽  
Computer Calculation ◽  
Transient Temperature ◽  
Unsteady Temperature ◽  
The Heat Transfer Coefficient

This paper proposes an effective method for determining thermal stresses in structural elements with a three-dimensional transient temperature field. This is the situation in the case of pressure elements of complex shapes. When the thermal stresses are determined by the finite element method (FEM), the temperature of the fluid and the heat transfer coefficient on the internal surface must be known. Both values are very difficult to determine under industrial conditions. In this paper, an inverse space marching method was proposed for the determination of the heat transfer coefficient on the active surface of the thick-walled plate. The temperature and heat flux on the exposed surface were obtained by measuring the unsteady temperature in a small region on the insulated external surface of a pressure component that is easily accessible. Three different procedures for the determination of the heat transfer coefficient on the water-spray surface were presented, with the division of the plate into three or four finite volumes in the normal direction to the plate surface. Calculation and experimental tests were carried out in order to validate the method. The results of the measurements and calculations agreed very well. The computer calculation time is short, so the technique can be used for online stress determination. The proposed method can be applied to monitor thermal stresses in the components of the power unit in thermal power plants, both conventional and nuclear.

scholarly journals Heat transfer in the vortex zone of a cyclone-bed chamber of furnace unit with fluidized bed

2019 ◽  
Vol 64 (1) ◽  
pp. 87-97
Author(s):  
E. A. Pitsuha ◽  
E. K. Buchilko ◽  
Yu. S. Teplitskii ◽  
D. S. Slizhuk
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Fluidized Bed ◽  
Flow Rate ◽  
Radial Direction ◽  
Air Flow ◽  
Air Flow Rate ◽  
Outlet Hole ◽  
The Heat Transfer Coefficient

An experimental investigation of the heat-transfer coefficient to a spherical probe in a cyclone-bed chamber with fluidized bed in the “cold” and “hot” regimes has been carried out. The heat-transfer coefficient was determined by the regular thermal regime. The dependences of the heat-transfer coefficient in the vortex-bed furnace on the various parameters: the diameter of the outlet hole, the air flow rate, the share of the bottom blast and the location of the probe were determined. It is revealed that in the “cold” regime the heat-transfer coefficient has practically constant value in the radial direction, it almost does not depend on the diameter of the outlet hole and the share of the bottom blast and depends significantly on the position of the probe along the height of the furnace and the air flow rate. The effect of flow swirling on the heat-transfer coefficient in a cyclone-bed chamber with fluidized bed is determined. When the fuel burns (“hot” regime), the heat-transfer coefficient is not constant in the radial direction and accept the maximum values in the central area of the chamber. At the same time, the part of conductive-convective component in the total heat-transfer coefficient to the spherical probe, depending on its radial position, is estimated at 40–70 %. The results can be used in the design and creation of modern high-efficiency furnaces for burning local solid biofuels.

Comparison of Surface Heat-Transfer Coefficient of GCr15 Steel Quenched by Clear Water and Nitrogen-Spray Water

2013 ◽  
Vol 444-445 ◽  
pp. 1290-1294
Author(s):  
Li Jun Hou ◽  
He Ming Cheng ◽  
Jian Yun Li ◽  
Bao Dong Shao ◽  
Jie Hou
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Surface Temperature ◽  
Transfer Coefficient ◽  
Thermal Stresses ◽  
Surface Heat ◽  
Water Quenching ◽  
Surface Heat Transfer ◽  
Surface Heat Transfer Coefficient ◽  
The Heat Transfer Coefficient

In order to simulate the thermal stresses, thermal strains and residual stresses of steel during quenching by numerical means, it is necessary to obtain an accurate boundary condition of temperature field. The explicit finite difference method, nonlinear estimate method and the experimental relation between temperature and time during water and nitrogen-spray water quenching have been used to solve the inverse problem of heat conduction. The relations between surface heat-transfer coefficient in water and nitrogen-spray water quenching and surface temperature of cylinder have been given. In numerical calculation, the thermal physical properties of material were treated as the function of temperature. The results show that the relations between surface heat-transfer coefficient and surface temperature are non-linear during water and nitrogen-spray water quenching, the heat-transfer coefficient is bigger when water quenching than when nitrogen-spray water before 580°C, the heat-transfer coefficient is smaller when water quenching than when nitrogen-spray water after 400°C. The results of calculation coincided with the results of experiment. This method can effectively determine the surface heat-transfer coefficient during water and nitrogen-spray water quenching.

scholarly journals Heat Transfer Performance in a Superheater of an Industrial CFBC Using Fuzzy Logic-Based Methods

Entropy ◽  
2019 ◽  
Vol 21 (10) ◽  
pp. 919 ◽  
Author(s):  
Krzywanski
Keyword(s):  
Heat Transfer ◽  
Fuzzy Logic ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Fluidized Bed ◽  
Circulating Fluidized Bed ◽  
Practical Significance ◽  
Overall Heat Transfer Coefficient ◽  
Bed Temperature ◽  
The Heat Transfer Coefficient

The heat transfer coefficient in the combustion chamber of industrial circulating flidized bed (CFB) boilers depends on many parameters as it is a result of multifactorial mechanisms proceeding in the furnace. Therefore, the development of an effective modeling tool, which allows for predicting the heat transfer coefficient is interesting as well as a timely subject, of high practical significance. The present paper deals with an innovative application of fuzzy logic-based (FL) method for the prediction of a heat transfer coefficient for superheaters of fluidized-bed boilers, especially circulating fluidized-bed combustors (CFBC). The approach deals with the modeling of heat transfer for the Omega Superheater, incorporated into the reaction chamber of an industrial 670 t/h CFBC. The height above the grid, bed temperature and voidage and temperature, gas velocity, and the boiler’s load constitute inputs. The developed Fuzzy Logic Heat (FLHeat) model predicts the local overall heat transfer coefficient of the Omega Superheater. The model is in good agreement with the measured data. The highest overall heat transfer coefficient is equal 220 W/(m2K) and can be achieved by the SH I superheater for the following inputs l = 20 m, tb = 900 °C, v = 0.95, u = 7 m/s, M-C-R = 100%. The proposed technique is an effective strategy and an option for other procedures of heat transfer coefficient evaluation.

scholarly journals Effect of Fluidized Bed Particle Size on Heat Transfer Coefficient at Different Operating Conditions

2018 ◽  
Vol 25 (4) ◽  
pp. 23-28
Author(s):  
Ehsan Fadhil Abbas ◽  
Sarah Burhan Izat
Keyword(s):  
Heat Transfer ◽  
Particle Size ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Fluidized Bed ◽  
Gas Flow ◽  
Operating Conditions ◽  
Sand Particle ◽  
Sand Particles ◽  
The Heat Transfer Coefficient

The aim of this study is to investigate the effect of gas flow velocity, size of sand particles, and the distance between tubes immersed in a fluidized bed on heat transfer coefficient. Experimental tests were conducted on a bundle of copper tubes of (12.5 mm) diameter and (320 mm) length arranged in a matrix (17×9) and immersed in a fluidized bed inside a plastic container. One of the tubes was used as a hot tube with a capacity of (122 W). (25 kg) of sand with three different diameters of sand particles (0.15, 0.3 and 0.6 mm) was used in these tests at ten speeds for gas flow (from 0.16 m/s to 0.516 m/s). The results showed a significant inverse effect of fluidized bed particles diameter on the heat transfer coefficient. Accordingly, the heat transfer coefficient for (0.15mm) diameter sand was found to be higher than that of (0.3 mm) and (0.6 mm) sand by about (3.124) and (6.868) times respectively, in all tests. The results showed good agreement with results from other studies conducted under the same conditions but with different sand particle size.

Sign in / Sign up

Export Citation Format

Share Document