Optical readout device for metal-cutting mills

1974 ◽  
Vol 17 (2) ◽  
pp. 300-302
Author(s):  
G. R. Kartanas
Keyword(s):  
Metal Cutting ◽  
Optical Readout ◽  
Readout Device

Dynamics of the processes in metal machining

1998 ◽  
Vol 2 ◽  
pp. 115-122
Author(s):  
Donatas Švitra ◽  
Jolanta Janutėnienė
Keyword(s):  
High Frequency ◽  
Machine Tools ◽  
Metal Cutting ◽  
Cutting Tool ◽  
Low Frequency ◽  
Metal Cutting Machine ◽  
Cutting Machine ◽  
Metal Machining

In the practice of processing of metals by cutting it is necessary to overcome the vibration of the cutting tool, the processed detail and units of the machine tool. These vibrations in many cases are an obstacle to increase the productivity and quality of treatment of details on metal-cutting machine tools. Vibration at cutting of metals is a very diverse phenomenon due to both it’s nature and the form of oscillatory motion. The most general classification of vibrations at cutting is a division them into forced vibration and autovibrations. The most difficult to remove and poorly investigated are the autovibrations, i.e. vibrations arising at the absence of external periodic forces. The autovibrations, stipulated by the process of cutting on metalcutting machine are of two types: the low-frequency autovibrations and high-frequency autovibrations. When the low-frequency autovibration there appear, the cutting process ought to be terminated and the cause of the vibrations eliminated. Otherwise, there is a danger of a break of both machine and tool. In the case of high-frequency vibration the machine operates apparently quiently, but the processed surface feature small-sized roughness. The frequency of autovibrations can reach 5000 Hz and more.

Possible examinations of stone machining focused on the relationship between technological parameters and surface quality

2013 ◽  
Vol 4 (1) ◽  
pp. 63-68 ◽  
Author(s):  
Zs. Kun ◽  
I. G. Gyurika
Keyword(s):  
Surface Roughness ◽  
Metal Cutting ◽  
Cutting Speed ◽  
Theoretical Background ◽  
Motion Path ◽  
Depth Of Cut ◽  
Manufacturing Cost ◽  
Technological Parameters ◽  
The Relationship ◽  
Manufacturing Time

Abstract The stone products with different sizes, geometries and materials — like machine tool's bench, measuring machine's board or sculptures, floor tiles — can be produced automatically while the manufacturing engineer uses objective function similar to metal cutting. This function can minimise the manufacturing time or the manufacturing cost, in other cases it can maximise of the tool's life. To use several functions, manufacturing engineers need an overall theoretical background knowledge, which can give useful information about the choosing of technological parameters (e.g. feed rate, depth of cut, or cutting speed), the choosing of applicable tools or especially the choosing of the optimum motion path. A similarly important customer's requirement is the appropriate surface roughness of the machined (cut, sawn or milled) stone product. This paper's first part is about a five-month-long literature review, which summarizes in short the studies (researches and results) considered the most important by the authors. These works are about the investigation of the surface roughness of stone products in stone machining. In the second part of this paper the authors try to determine research possibilities and trends, which can help to specify the relation between the surface roughness and technological parameters. Most of the suggestions of this paper are about stone milling, which is the least investigated machining method in the world.

Influence of the Configuration on the Gearbox Characteristics in Metal-Cutting Machines

2020 ◽  
Vol 40 (6) ◽  
pp. 491-494
Author(s):  
E. V. Mitin ◽  
S. P. Sul’din ◽  
A. E. Mitina
Keyword(s):  
Metal Cutting

Experiment Study of Oil-Air Lubrication on Cooling of Turning Tools

2011 ◽  
Vol 189-193 ◽  
pp. 3187-3190 ◽  
Author(s):  
Jin Li Wang ◽  
Lin Cai ◽  
Hong Tao Zheng
Keyword(s):  
Metal Cutting ◽  
Research Work ◽  
Cutting Temperature ◽  
Cost Savings ◽  
Machining Process ◽  
Dry Cutting ◽  
Air Lubrication ◽  
Temperature Contrast ◽  
Cooling Technology ◽  
Lubrication Conditions

When lubricants are used according to special requirements, it is possible to achieve considerable cost savings. Compared to conventional coolant cooling technology used in metal cutting, oil-air lubrication increases cooling performance, avoids environmental pollution, reduces running and maintenance costs. The cutting temperature contrast experimental research was based on close to practice 45# steel in dry cutting, wet cutting and oil-air lubrication conditions. The research work concentrated on the superiority of oil-air lubrication cooling and the influence of cutting amount on temperature. The experimental results show that oil-air lubrication is more effective in reducing the cutting temperature than wet cutting or dry cutting, this paper details the cutting temperature curves at several different tests provides a basis for industrial production, improves the level of machining process and the significance was being reported.

Sign in / Sign up

Export Citation Format

Share Document