CO hydrogenation on rhodium catalysts as studied by temperature programmed desorption and reaction

1994 ◽  
Vol 23 (3-4) ◽  
pp. 227-236 ◽  
Author(s):  
D. Demri ◽  
J. P. Hindermann ◽  
A. Kiennemann ◽  
C. Mazzocchia
Keyword(s):  
Co Hydrogenation ◽  
Temperature Programmed Desorption ◽  
Rhodium Catalysts ◽  
Temperature Programmed

scholarly journals The interaction of size-selected Ru3 clusters with RF-deposited TiO2: probing Ru-CO binding sites with CO-Temperature Programmed Desorption

2021 ◽  
Author(s):  
Liam Howard-Fabretto ◽  
Timothy Gorey ◽  
Guangjing Li ◽  
Siriluck Tesana ◽  
Gregory F Metha ◽  
...  
Keyword(s):  
Radio Frequency ◽  
Chemical Reactions ◽  
Binding Sites ◽  
Co Hydrogenation ◽  
Temperature Programmed Desorption ◽  
Temperature Programmed

Small Ru clusters are efficient catalysts for chemical reactions such as CO hydrogenation. In this study 3-atom Ru3 clusters were deposited onto radio frequency (RF)-deposited TiO2 which is an inexpensive,...

Interactions of Ge Atoms with High- ê Oxide Dielectric Surfaces

2005 ◽  
Vol 879 ◽  
Author(s):  
Scott K. Stanley ◽  
John G. Ekerdt
Keyword(s):  
Oxide Layer ◽  
Photoelectron Spectroscopy ◽  
Chemical Vapor ◽  
Temperature Programmed Desorption ◽  
Tungsten Filament ◽  
X Ray ◽  
Dielectric Surfaces ◽  
Temperature Programmed ◽  
The Stability ◽  
Ge Nanocrystals

AbstractGe is deposited on HfO2 surfaces by chemical vapor deposition (CVD) with GeH4. 0.7-1.0 ML GeHx (x = 0-3) is deposited by thermally cracking GeH4 on a hot tungsten filament. Ge oxidation and bonding are studied at 300-1000 K with X-ray photoelectron spectroscopy (XPS). Ge, GeH, GeO, and GeO2 desorption are measured with temperature programmed desorption (TPD) at 400-1000 K. Ge initially reacts with the dielectric forming an oxide layer followed by Ge deposition and formation of nanocrystals in CVD at 870 K. 0.7-1.0 ML GeHx deposited by cracking rapidly forms a contacting oxide layer on HfO2 that is stable from 300-800 K. Ge is fully removed from the HfO2 surface after annealing to 1000 K. These results help explain the stability of Ge nanocrystals in contact with HfO2.

Highly active carbon nanotube–promoted Rh-Mn-Li/SiO2 catalysts for the synthesis of C2+ oxygenates from syngas

2021 ◽  
pp. 174751982098472
Author(s):  
Jun Yu ◽  
Ying Han ◽  
Guoqing Chen ◽  
Xiuzhen Xiao ◽  
Haifang Mao ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Photoelectron Spectroscopy ◽  
Co Hydrogenation ◽  
X Ray ◽  
Highly Active ◽  
Transmission Electron ◽  
Co Insertion ◽  
Temperature Programmed Surface Reaction ◽  
Temperature Programmed ◽  
Oxygenate Synthesis

The effect of carbon nanotubes on the catalytic properties of Rh-Mn-Li/SiO2 catalysts was investigated for CO hydrogenation. The catalysts were comprehensively characterized by means of X-ray power diffraction, N2 sorption, transmission electron microscope, H2–temperature-programmed reduction, CO–temperature-programmed desorption, temperature-programmed surface reaction, and X-ray photoelectron spectroscopy. The results showed that an appropriate amount of carbon nanotubes can be attached to the surface of the SiO2 sphere and can improve the Rh dispersion. Moderate Rh-Mn interaction can be obtained by doping with the appropriate amount of carbon nanotubes, which promotes the formation of strongly adsorbed CO and facilitates the progress of CO insertion, resulting in the increase in the selectivity of C2+ oxygenate synthesis.

scholarly journals Nanosheet-Like Ho2O3 and Sr-Ho2O3 Catalysts for Oxidative Coupling of Methane

Catalysts ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 388
Author(s):  
Yuqiao Fan ◽  
Changxi Miao ◽  
Yinghong Yue ◽  
Weiming Hua ◽  
Zi Gao
Keyword(s):  
Oxidative Coupling ◽  
Temperature Programmed Desorption ◽  
Oxidative Coupling Of Methane ◽  
Molar Ratio ◽  
Impregnation Method ◽  
Oxygen Species ◽  
N2 Adsorption ◽  
Basic Sites ◽  
Chemisorbed Oxygen ◽  
Temperature Programmed

In this work, Ho2O3 nanosheets were synthesized by a hydrothermal method. A series of Sr-modified Ho2O3 nanosheets (Sr-Ho2O3-NS) with a Sr/Ho molar ratio between 0.02 and 0.06 were prepared via an impregnation method. These catalysts were characterized by several techniques such as XRD, N2 adsorption, SEM, TEM, XPS, O2-TPD (temperature-programmed desorption), and CO2-TPD, and they were studied with respect to their performances in the oxidative coupling of methane (OCM). In contrast to Ho2O3 nanoparticles, Ho2O3 nanosheets display greater CH4 conversion and C2-C3 selectivity, which could be related to the preferentially exposed (222) facet on the surface of the latter catalyst. The incorporation of small amounts of Sr into Ho2O3 nanosheets leads to a higher ratio of (O− + O2−)/O2− as well as an enhanced amount of chemisorbed oxygen species and moderate basic sites, which in turn improves the OCM performance. The optimal catalytic behavior is achievable on the 0.04Sr-Ho2O3-NS catalyst with a Sr/Ho molar ratio of 0.04, which gives a 24.0% conversion of CH4 with 56.7% selectivity to C2-C3 at 650 °C. The C2-C3 yield is well correlated with the amount of moderate basic sites present on the catalysts.

scholarly journals Novel Nickel- and Magnesium-Modified Cenospheres as Catalysts for Dry Reforming of Methane at Moderate Temperatures

Catalysts ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1066 ◽  
Author(s):  
Bogdan Samojeden ◽  
Marta Kamienowska ◽  
Armando Izquierdo Colorado ◽  
Maria Elena Galvez ◽  
Ilona Kolebuk ◽  
...  
Keyword(s):  
Supported Catalysts ◽  
Temperature Programmed Desorption ◽  
Catalytic Performance ◽  
Dry Reforming ◽  
Dry Reforming Of Methane ◽  
Temperature Programmed Reduction ◽  
Fly Ashes ◽  
Coal Fly Ashes ◽  
Temperature Programmed ◽  
Mg Content

Cenospheres from coal fly ashes were used as support in the preparation of Ni–Mg catalysts for dry reforming of methane. These materials were characterized by means of XRD, H2-temperature-programmed reduction (H2-TPR), CO2-temperature-programmed desorption (CO2-TPD), and low-temperature nitrogen sorption techniques. The cenosphere-supported catalysts showed relatively high activity and good stability in the dry reforming of methane (DRM) at 700 °C. The catalytic performance of modified cenospheres was found to depend on both Ni and Mg content. The highest activity at 750 °C and 1 atm was observed for the catalyst containing 30 wt % Mg and 10, 20, and 30 wt % Ni, yielding to CO2 and CH4 conversions of around 95%.

scholarly journals Nonthermal Plasma Induced Fabrication of Solid Acid Catalysts for Glycerol Dehydration to Acrolein

Catalysts ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 391
Author(s):  
Lu Liu ◽  
Xiaofei Philip Ye
Keyword(s):  
Solid Acid ◽  
Nonthermal Plasma ◽  
Temperature Programmed Desorption ◽  
Argon Atmosphere ◽  
Solid Acid Catalysts ◽  
Acid Catalysts ◽  
Pyridine Adsorption ◽  
X Ray ◽  
Glycerol Dehydration ◽  
Temperature Programmed

The feasibility of fabricating better solid acid catalysts using nonthermal plasma (NTP) technology for biobased acrolein production is demonstrated. NTP discharge exposure was integrated in catalyst fabrication in air or argon atmosphere. The fabricated catalysts were characterized by Brunauer–Emmett–Teller surface area analysis, temperature-programmed desorption of ammonia, X-ray powder diffraction and Fourier-transform infrared spectroscopy of pyridine adsorption, in comparison to regularly prepared catalysts as a control. Further, kinetic results collected via glycerol dehydration experiments were compared, and improvement in acrolein selectivity was displayed when the catalyst was fabricated in the argon NTP, but not in the air NTP. Possible mechanisms for the improvement were also discussed.

Exfoliated MoS2 Temperature programmed desorption

1986 ◽  
Vol 173 (2-3) ◽  
pp. A397
Author(s):  
B.K. Miremadi ◽  
S.R. Morrison
Keyword(s):  
Temperature Programmed Desorption ◽  
Temperature Programmed
Sign in / Sign up

Export Citation Format

Share Document