Bainitic high-strength cast iron with spheroidal graphite (review)

1991 ◽  
Vol 33 (10) ◽  
pp. 762-771
Author(s):  
B. I. Voronenko ◽  
Yu. I. Romatovskii
Keyword(s):  
Cast Iron ◽  
High Strength ◽  
Spheroidal Graphite

scholarly journals Copper Enrichment around Graphite in Cu-added High-Strength Spheroidal Graphite Cast Iron

Materia Japan ◽  
2009 ◽  
Vol 48 (12) ◽  
pp. 624-624 ◽  
Author(s):  
Yasuhide Ishiguro ◽  
Kenji Ichino ◽  
Hideto Takasugi
Keyword(s):  
Cast Iron ◽  
High Strength ◽  
Spheroidal Graphite ◽  
Spheroidal Graphite Cast Iron ◽  
Graphite Cast Iron

ISO 185/JL/350

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Cast Iron ◽  
Gray Cast Iron ◽  
High Strength ◽  
Heat Treating ◽  
Gray Cast ◽  
Spheroidal Graphite ◽  
Cast Irons ◽  
Test Pieces

Abstract ISO 185/JL/350 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a tensile strength of 350–450 MPa (51–65 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides a combination of high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on wear resistance as well as casting and heat treating. Filing Code: CI-85. Producer or source: International Organization for Standardization.

scholarly journals Ausferritic (bainitic) cast iron: Harmonization of international standard ISO 17804 in application to the conditions of Belarus

2021 ◽  
pp. 56-72
Author(s):  
A. I. Pokrovskii ◽  
B. B. Khina ◽  
O. A. Tolkacheva
Keyword(s):  
Tensile Strength ◽  
Cast Iron ◽  
Ductile Iron ◽  
High Strength ◽  
State Committee ◽  
Spheroidal Graphite ◽  
Cast Irons ◽  
International Standard ◽  
Industrial Enterprises ◽  
State Organizations

The experience of the Physico-technical Institute (PhTI) of the National Acdemy of Sciences of Belarus in the harmonization of international standard ISO 17804 (Founding – Ausferritic spheroidal graphite cast irons – Classification) and development of the Belorussian analogue STB ISO is described. The reasons for the choice of austempered ductile iron (ADI) as an object for standard harmonization are presented: it is the most promising cast iron in comparison with gray and classical ductile iron. The work procedure on harmonization is described: how to include the task into the State Plan on standardization, specificity of translation of the text, peculiarities of with state organizations responsible for approbation of standards such as Belorussian Institute for Standardization and Certification (BelGISS) and State Committee on Standards (Gosstandart), writing a summary of external reviews, working with critical comments from potential users. It is outlined that any foreign standard does not exists independently but is closely connected with at least 10 to 20 other standards. Thus, harmonization necessitates coordination with other standards and sometimes even with handbooks by adding annexes to the main text. The importance of a proper choice of the standard status is outlined: identical (ID) or modified (MOD). Developing an identical standard is prestigious but difficult because is requires harmonization of all the referenced standards, which is a very labor-consuming procedure. It is argued that the most suitable is ‘intermediate’ variant: adopting the authentic text of the international standard (in high-quality translation) but with annexes reflecting national specificity in this area. As a result, a harmonized standard is developed which, for the first time in Belarus, standardize the tensile strength of 800 MPa in combination with the elongation of 10 % and the tensile strength of 1400 MPa in combination with the elongation of 1 % for cast irons.The annual demand for ADI in Belarus is estimated as about 10,000 ton. It is shown that in Belarus, where about 60 industrial enterprises have a foundry and almost every engineering plant has a heat-treatment shop, austempered ductile cast (ADI), which features a high strength, can successfully compete with rolled steel in certain applications.

scholarly journals Technological pecularities of producing cast iron with spherical graphite using a fast-cooled copper-magnesium ligature

2020 ◽  
pp. 15-21
Author(s):  
A. G. Slutsky ◽  
I. L. Kulinich ◽  
V. A. Sheinert ◽  
V. A. Stefanovich ◽  
R. E. Trubitsky ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cast Iron ◽  
Chemical Composition ◽  
Magnesium Alloys ◽  
High Strength ◽  
Favorable Effect ◽  
Maximum Effect ◽  
Spheroidal Graphite ◽  
Graphite Phase ◽  
Spherical Graphite

Various modifiers are used for non-furnace processing of cast iron. Some of them are designed for inoculating modification, which improves mechanical properties and eliminates the appearance of whiteness in castings, while others are designed for spheroidizing processing, in particular for producing cast iron with spherical and vermicular graphite. Some have both spheroidizing and inoculating properties. The main part of inoculating and spheroidizing modifiers is made on iron-silicon, Nickel and copper bases.In addition to the chemical composition, the size of the modifier particles, as well as their shape, are of great importance for modification. The optimal size of the fraction depends significantly on the non-furnace processing technology. Thus, for the larger the bucket and the longer the casting the longer the modification effect is required. One of the methods to achieve this is to increase the particle size of the modifier to 50 mm. When intraform processing of cast iron with spherical and vermicular graphite, magnesium-containing modifiers have strict limits on the upper size (4...5 mm), and in addition, the content of small fractions (less than 0.6...1 mm) is not allowed.The use of «heavy» magnesium-containing ligatures for spheroidizing modification of cast iron in order to obtain higher physical and mechanical properties has scientific and practical interest. Numerous studies show that for maximum effect the formation of the structure of the spheroidal graphite, dispersed pearlite metallic base of SGI (spheroidal graphite iron) relevant question is not only selection of the chemical composition of magnesium alloys, but also of the fractional composition, as well as effective method of input into the liquid melt.The purpose of this work was to study the technological features of obtaining cast iron with spherical graphite by bucket modification of copper-magnesium ligature.The researchers used a Leo–1420 scanning microscope, a Polam l-213 optical microscope, and a VEGA II LMU electron microscope with an INCA ENERGY 350 microanalyzer. High-speed induction melting plant, a set of equipment for analyzing the technological and mechanical properties of high-strength cast iron were used.Earlier experimental studies have shown the real possibility of obtaining in the laboratory a «heavy» copper-magnesium alloys as the alloying of magnesium metal with copper, followed by rapid cooling with use of rolling and plastic deformation of powder alloys. Analysis of test results of samples of such alloys showed that it depends on the value of its additives into liquid iron in the structure of formed graphite phase in compacted and globular form. At the same time, the metal base of cast iron is additionally alloyed with copper, which has a favorable effect on the strength characteristics of SGI.However, an urgent problem is the possibility of the appearance of a cementite phase in the structure of high-strength cast iron as a result of its increased supercooling due to the process of spheroidization of the graphite phase. This phenomenon is compounded by the fact that the copper-magnesium ligature, in contrast to the «light» ligature, does not contain silicon active graphitizer. This feature must be taken into account when obtaining high-strength cast iron of high grades.

Wear resistance of high-strength cast iron with spheroidal graphite produced by centrifugal casting

1968 ◽  
Vol 10 (9) ◽  
pp. 745-746 ◽  
Author(s):  
I. O. Tsypin ◽  
N. S. Pavlenko ◽  
V. A. Rusalkin ◽  
A. A. Chernyi ◽  
M. B. Zhitomirskii ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
Centrifugal Casting ◽  
High Strength ◽  
Spheroidal Graphite
Sign in / Sign up

Export Citation Format

Share Document