Some features of cutting tool wear in finish machining of low-porosity alloy powder metallurgy steels

1984 ◽  
Vol 23 (2) ◽  
pp. 153-156 ◽  
Author(s):  
Yu. G. Dorofeev ◽  
V. I. Ustimenko ◽  
A. V. Skorikov
Keyword(s):  
Powder Metallurgy ◽  
Tool Wear ◽  
Alloy Powder ◽  
Cutting Tool ◽  
Cutting Tool Wear ◽  
Finish Machining ◽  
Low Porosity

A Strategy of Toolpath Generation for Finish Machining of Mold Cavity Based on Tool-Zmap Model

2009 ◽  
Vol 407-408 ◽  
pp. 273-278
Author(s):  
Yu Jun Cai ◽  
Chun Zheng Duan ◽  
Li Jie Sun
Keyword(s):  
Tool Wear ◽  
High Speed ◽  
Cutting Tool ◽  
Geometric Model ◽  
Cutting Tools ◽  
Mold Cavity ◽  
High Speed Machining ◽  
Cutting Tool Wear ◽  
Finish Machining ◽  
Toolpath Generation

A strategy of toolpath generation based on Tool-Zmap geometric model has been proposed to achieve efficient finish machining of mold cavity. Considering cutting tool wear, the finish machining of mold cavity was performed using variable cutting tools of different diameter. Each cutting tool only cuts the corresponding area to avoid identifying machining characteristic and poor rigidity of cutting tool during high speed machining. Finally, the validity of presented strategy was experimentally affirmed by a machining example.

A First Step towards a Tribological Approach to Investigate Cutting Tool Wear

2014 ◽  
Vol 611-612 ◽  
pp. 452-459 ◽  
Author(s):  
Giovenco Axel ◽  
Frédéric Valiorgue ◽  
Cédric Courbon ◽  
Joël Rech ◽  
Ugo Masciantonio
Keyword(s):  
Tool Wear ◽  
Cutting Tool ◽  
304L Stainless Steel ◽  
Fe Modelling ◽  
Wear Model ◽  
Cutting Tool Wear ◽  
The Will ◽  
Preliminary Study ◽  
The Impact ◽  
Macroscopic Parameters

The present work is motivated by the will to improve Finite Element (FE) Modelling of cutting tool wear. As a first step, the characterisation of wear mechanisms and identification of a wear model appear to be fundamental. The key idea of this work consists in using a dedicated tribometer, able to simulate relevant tribological conditions encountered in cutting (pressure, velocity). The tribometer can be used to estimate the evolution of wear versus time for various tribological conditions (pressure, velocity, temperature). Based on this design of experiments, it becomes possible to identify analytically a wear model. As a preliminary study this paper will be focused on the impact of sliding speed at the contact interface between 304L stainless steel and tungsten carbide (WC) coated with titanium nitride (TiN) pin. This experiment enables to observe a modification of wear phenomena between sliding speeds of 60 m/min and 180 m/min. Finally, the impact on macroscopic parameters has been observed.

Tool Wear Detection Using Time Series Analysis of Acoustic Emission

1989 ◽  
Vol 111 (3) ◽  
pp. 199-205 ◽  
Author(s):  
S. Y. Liang ◽  
D. A. Dornfeld
Keyword(s):  
Time Series ◽  
Acoustic Emission ◽  
Tool Wear ◽  
Time Series Analysis ◽  
Cutting Tool ◽  
Shear Zones ◽  
Parameter Vector ◽  
Model Parameter ◽  
Cutting Tool Wear ◽  
Series Analysis

This paper discusses the monitoring of cutting tool wear based on time series analysis of acoustic emission signals. In cutting operations, acoustic emission provides useful information concerning the tool wear condition because of the fundamental differences between its source mechanisms in the rubbing friction on the wear land and the dislocation action in the shear zones. In this study, a signal processing scheme is developed which uses an autoregressive time-series to model the acoustic emission generated during cutting. The modeling scheme is implemented with a stochastic gradient algorithm to update the model parameters adoptively and is thus a suitable candidate for in-process sensing applications. This technique encodes the acoustic emission signal features into a time varying model parameter vector. Experiments indicate that the parameter vector ignores the change of cutting parameters, but shows a strong sensitivity to the progress of cutting tool wear. This result suggests that tool wear detection can be achieved by monitoring the evolution of the model parameter vector during machining processes.

Cutting tool wear in the machining of hardened steels

Wear ◽  
2001 ◽  
Vol 247 (2) ◽  
pp. 152-160 ◽  
Author(s):  
J Barry ◽  
G Byrne
Keyword(s):  
Tool Wear ◽  
Cutting Tool ◽  
Hardened Steels ◽  
Cutting Tool Wear

scholarly journals Cutting Tool Wear Monitoring

2015 ◽  
Vol 15 (3) ◽  
pp. 380-384 ◽  
Author(s):  
Jan Madl ◽  
Michal Martinovsky
Keyword(s):  
Tool Wear ◽  
Cutting Tool ◽  
Tool Wear Monitoring ◽  
Cutting Tool Wear ◽  
Wear Monitoring

scholarly journals Milling Inconel 718 Workpiece With Cryogenically Treated And Untreated Cutting Tools

2021 ◽  
Author(s):  
Hüseyin Gürbüz ◽  
Şehmus Baday
Keyword(s):  
Surface Roughness ◽  
Tool Wear ◽  
Abrasive Wear ◽  
Inconel 718 ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Cutting Tool Wear ◽  
Feed Force

Abstract Although Inconel 718 is an important material for modern aircraft and aerospace, it is a kind material, which is known to have low machinability. Especially, while these types of materials are machined, high cutting temperatures, BUE on cutting tool, high cutting forces and work hardening occur. Therefore, in recent years, instead of producing new cutting tools that can withstand these difficult conditions, cryogenic process, which is a heat treatment method to increase the wear resistance and hardness of the cutting tool, has been applied. In this experimental study, feed force, surface roughness, vibration, cutting tool wear, hardness and abrasive wear values that occurred as a result of milling of Inconel 718 material by means of cryogenically treated and untreated cutting tools were investigated. Three different cutting speeds (35-45-55 m/min) and three different feed rates (0.02-0.03-0.04 mm/tooth) at constant depth of cut (0.2 mm) were used as cutting parameters in the experiments. As a result of the experiments, lower feed forces, surface roughness, vibration and cutting tool wear were obtained with cryogenically treated cutting tools. As the feed rate and cutting speed were increased, it was seen that surface roughness, vibration and feed force values increased. At the end of the experiments, it was established that there was a significant relation between vibration and surface roughness. However, there appeared an inverse proportion between abrasive wear and hardness values. While BUE did not occur during cryogenically treated cutting tools, it was observed that BUE occurred in cutting tools which were not cryogenically treated.

Real-time estimation of machine cutting tool wear

2022 ◽  
pp. 1-14
Author(s):  
Zhi-An Shen ◽  
Jiangfeng Cheng ◽  
Chieh-Tse Tang ◽  
Chun-Liang Lin ◽  
Chia-Feng Juang
Keyword(s):  
Tool Wear ◽  
Real Time ◽  
Cutting Tool ◽  
Time Estimation ◽  
Cutting Tool Wear ◽  
Real Time Estimation
Sign in / Sign up

Export Citation Format

Share Document