Sorption of antibiotics which are organic bases by the sodium form of porous carboxylate ion-exchange resins

1971 ◽  
Vol 5 (10) ◽  
pp. 620-623
Author(s):  
N. A. Perevozkaya ◽  
L. F. Yakhontova ◽  
B. P. Bruns
Keyword(s):  
Ion Exchange ◽  
Ion Exchange Resins ◽  
Organic Bases ◽  
Exchange Resins ◽  
Sodium Form

Effects of ion exchange resins in different mobile ion forms on semi-aerobic landfill leachate treatment

2010 ◽  
Vol 61 (3) ◽  
pp. 641-649 ◽  
Author(s):  
Mohammed J. K. Bashir ◽  
Hamidi Abdul Aziz ◽  
Mohd Suffian Yusoff ◽  
A. A. M. Huqe ◽  
Soraya Mohajeri
Keyword(s):  
Ion Exchange ◽  
Landfill Leachate ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Ion Exchange Resins ◽  
Leachate Treatment ◽  
Cationic Resin ◽  
Exchange Resins ◽  
Sodium Form ◽  
Cationic Exchanger

Landfill leachate is one of the major contamination sources. In this study, the ability of synthetic ion exchange resins which carry different mobile ion for removing color, chemical oxygen demand (COD), and ammonia nitrogen (NH3-N) from stabilized leachate was investigated. The synthetic resin INDION 225 Na as a cationic exchanger and INDION FFIP MB as an anionic exchanger were used in this study. INDION 225 Na was used in hydrogen form (H+) and in sodium form (Na+), while INDION FFIP MB resin was used in hydroxide form (OH−) and in calcium form (Cl−) form. The results indicated better removal of color, COD and NH3-N by using INDION 225 Na in H+ as compared with Na+ form, while no performance differences were observed by using INDION FFIP MB in OH− or Cl− form. Applying cationic resin followed by anionic resin achieved 97, 88 and 94, percent removal of color, COD and NH3-N. The residual amounts were 160 Pt-Co, 290 mg/L and 110 mg/L of color, COD and NH3-N respectively.

Embedding Procedure for Water Swollen Samples

1970 ◽  
Vol 28 ◽  
pp. 504-505
Author(s):  
Ann M. Thomas ◽  
Virginia Shemeley
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Exchange ◽  
Structural Changes ◽  
Cross Linking ◽  
Ion Exchange Resins ◽  
Transmission Electron ◽  
First Pass ◽  
Exchange Resins

Those samples which swell rapidly when exposed to water are, at best, difficult to section for transmission electron microscopy. Some materials literally burst out of the embedding block with the first pass by the knife, and even the most rapid cutting cycle produces sections of limited value. Many ion exchange resins swell in water; some undergo irreversible structural changes when dried. We developed our embedding procedure to handle this type of sample, but it should be applicable to many materials that present similar sectioning difficulties.The purpose of our embedding procedure is to build up a cross-linking network throughout the sample, while it is in a water swollen state. Our procedure was suggested to us by the work of Rosenberg, where he mentioned the formation of a tridimensional structure by the polymerization of the GMA biproduct, triglycol dimethacrylate.

Applications of Ion Exchange Resin in Oral Drug Delivery Systems

2017 ◽  
Vol 7 (03) ◽  
Author(s):  
Kathpalia Harsha ◽  
Das Sukanya
Keyword(s):  
Drug Delivery ◽  
Ion Exchange ◽  
Drug Delivery Systems ◽  
Oral Drug Delivery ◽  
Physical Stability ◽  
Delivery Systems ◽  
Oral Drug ◽  
Ion Exchange Resins ◽  
Exchange Resins ◽  
Oral Drug Delivery Systems

Ion Exchange Resins (IER) are insoluble polymers having styrene divinylbenzene copolymer backbone that contain acidic or basic functional groups and have the ability to exchange counter ions with the surrounding aqueous solutions. From the past many years they have been widely used for purification and softening of water and in chromatographic columns, however recently their use in pharmaceutical industry has gained considerable importance. Due to the physical stability and inert nature of the resins, they can be used as a versatile vehicle to design several modified release dosage forms The ionizable drug is complexed with the resin owing to the property of ion exchange. This resin complex dissociatesin vivo to release the drug. Based on the dissociation strength of the drug from the drug resin complex, various release patterns can be achieved. Many formulation glitches can be circumvented using ion exchange resins such as bitter taste and deliquescence. These resins also aid in enhancing disintegrationand stability of formulation. This review focuses on different types of ion exchange resins, their preparation methods, chemistry, properties, incompatibilities and their application in various oral drug delivery systems as well as highlighting their use as therapeutic agents.

THE DISPOSAL OF USED ION EXCHANGE RESINS

2004 ◽  
Vol 3 (3) ◽  
pp. 447-455
Author(s):  
Viky Dicu ◽  
Carmen Iesan ◽  
Mihai Chirica ◽  
Satish Bapat
Keyword(s):  
Ion Exchange ◽  
Ion Exchange Resins ◽  
Exchange Resins

FTIR ANALYSIS OF ION EXCHANGE RESINS WITH APPLICATION IN PERMANENT HARD WATER SOFTENING

2014 ◽  
Vol 13 (9) ◽  
pp. 2145-2152 ◽  
Author(s):  
Liliana Lazar ◽  
Laura Bulgariu ◽  
Bogdan Bandrabur ◽  
Ramona-Elena Tataru-Farmus ◽  
Mioara Drobota ◽  
...  
Keyword(s):  
Ion Exchange ◽  
Hard Water ◽  
Ion Exchange Resins ◽  
Ftir Analysis ◽  
Water Softening ◽  
Exchange Resins

Innovative and sustainable concept of regeneration of decolorization ion exchange resins

2012 ◽  
pp. 381-384 ◽  
Author(s):  
M.A. Theoleyre ◽  
Anne Gonin ◽  
Dominique Paillat
Keyword(s):  
Ion Exchange ◽  
Water Requirement ◽  
Ion Exchange Resins ◽  
Salt Solutions ◽  
Nanofiltration Membranes ◽  
Industrial Efficiency ◽  
Salt Consumption ◽  
Multiple Effect ◽  
Exchange Resins

Regeneration of resins used for decolorization of sugar solutions is done with concentrated salt solutions. Nanofiltration membranes have been proven effective, in terms of industrial efficiency in decreasing salt consumption. More than 90% of the salt that is necessary for regeneration can be recycled through a combination of direct recycling of intermediate eluates, the separation of colored compounds by use of very selective nanofiltration membranes and a multiple-effect evaporation of salty permeates. The desalted color compound solution is sent to the molasses, limiting considerably the effluent to be treated. Starting from a liquor of 800 IU, the water requirement is limited to less than 100 L/t of sugar and the amount of wastewater can be reduced to less than 40 L/t of sugar.

Innovative concepts of regeneration of decolorization ion exchange resins in sugar refineries

2016 ◽  
pp. 377-380
Author(s):  
Marc André Théoleyre ◽  
Anne Gonin ◽  
Dominique Paillat
Keyword(s):  
Ion Exchange ◽  
Reverse Osmosis ◽  
Energy Supply ◽  
Ion Exchange Resins ◽  
Salt Solutions ◽  
Nanofiltration Membranes ◽  
Local Conditions ◽  
Salt Consumption ◽  
Multiple Effect ◽  
Exchange Resins

Regeneration of resins used for decolorization of sugar solutions is done with concentrated salt solutions. Nanofiltration membranes have been proven effective, in terms of industrial efficiency in decreasing salt consumption. More than 90% of the salt that is necessary for regeneration can be recycled through a combination of direct recycling of intermediate eluates, the separation of colored compounds by use of very selective nanofiltration membranes and a system to concentrate salty permeates. According to specific local conditions on energy supply and cost, the concentration of salty permeates can be either a multiple effect evaporator or a combination of electrodialysis and reverse osmosis. The desalted color compound solution is sent to the molasses, limiting considerably the effluent to be treated. Starting from a liquor of 800 IU, the water requirement is limited to less than 100 L/t of sugar and the amount of wastewater can be reduced to less than 40 L/t of sugar.

Sign in / Sign up

Export Citation Format

Share Document