Dynamic problems of the theory of thin-walled elements of load-bearing structures weakened by cutouts (review). Part II

1980 ◽  
Vol 12 (6) ◽  
pp. 781-793 ◽  
Author(s):  
I. N. Preobrazhenskii
Keyword(s):  
Dynamic Problems ◽  
Load Bearing ◽  
Thin Walled

Structural bionic design for thin-walled cylindrical shell against buckling under axial compression

2011 ◽  
Vol 225 (11) ◽  
pp. 2619-2627 ◽  
Author(s):  
D Xing ◽  
W Chen ◽  
J Ma ◽  
L Zhao
Keyword(s):  
Cylindrical Shell ◽  
Axial Compression ◽  
Cross Section ◽  
Cylindrical Shells ◽  
High Load ◽  
Vascular Bundles ◽  
Bionic Design ◽  
Load Bearing ◽  
Thin Walled ◽  
The Cross

In nature, bamboo develops an excellent structure to bear nature forces, and it is very helpful for designing thin-walled cylindrical shells with high load-bearing efficiency. In this article, the cross-section of bamboo is investigated, and the feature of the gradual distribution of vascular bundles in bamboo cross-section is outlined. Based on that, a structural bionic design for thin-walled cylindrical shells is presented, of which the manufacturability is also taken into consideration. The comparison between the bionic thin-walled cylindrical shell and a simple hollow one with the same weight showed that the load-bearing efficiency was improved by 44.7 per cent.

scholarly journals BEHAVIOUR OF VERTICAL CYLINDRICAL TANK WITH LOCAL WALL IMPERFECTIONS

2019 ◽  
Vol 25 (3) ◽  
pp. 287-296 ◽  
Author(s):  
Antanas Šapalas ◽  
Gintas Šaučiuvėnas ◽  
Konstantin Rasiulis ◽  
Mečislovas Griškevičius ◽  
Tomas Gečys
Keyword(s):  
Bearing Capacity ◽  
Extreme Points ◽  
The European Union ◽  
Maintenance Period ◽  
Cylindrical Tank ◽  
Load Bearing Capacity ◽  
Complex Investigation ◽  
Load Bearing ◽  
Thin Walled Structures ◽  
Thin Walled

Design of modern thin-walled metal structures is widely used around the world. In recent decades, more comprehensive research is carried out to investigate the behaviour of various thin-walled structures. Generally, the structure with regular geometry is investigated. In various countries such as USA, Russia, and the European Union issued the standards on regulation of the construction, design and maintenance of thin-walled structures. The actually used period of tanks usually is longer than recommendatory period. Recommendatory maintenance period of metal tanks is 15–20 years. Therefore, for such structures one of the most considerable questions is the residual load bearing capacity beyond the end of the maintenance period. This phase of using of structures is associated with complex investigation and numerical analysis of thin-walled structures. In this paper the load bearing capacity of the steel wall of the existing over-ground vertical cylindrical tank in volume of 5,000 m3 with a single defect and with a few contiguous local defects of the shape is analyzed. Calculations carried out are taking into account all the imperfections of the wall geometry. A major goal of the research – developing a realistic numerical model of the object analyzed, taking into account all the imperfections, determining the wall stress and strain state, exploring the places of extreme points, calculating the residual load bearing capacity of the tank and scrutinizing possible strengthening schemes for defective areas.

scholarly journals Stability of Thin-Walled Beams with Lateral Continuous Restraint

2015 ◽  
Vol 15 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Ivan Balázs ◽  
Jindřich Melcher
Keyword(s):  
Critical Load ◽  
Cross Sections ◽  
Building Industry ◽  
Lateral Torsional Buckling ◽  
Torsional Buckling ◽  
Load Bearing ◽  
Buckling Resistance ◽  
Resistance Assessment ◽  
Thin Walled

Abstract Metal beams of thin-walled cross-sections have been widely used in building industry as members of load-bearing structures. Their resistance is usually limited by lateral torsional buckling. It can be increased in case a beam is laterally supported by members of cladding or ceiling construction. The paper deals with possibilities of determination of critical load of thin-walled beams with lateral continuous restraint which is crucial for beam buckling resistance assessment

scholarly journals Degradation of Axial Ultimate Load-Bearing Capacity of Circular Thin-Walled Concrete-Filled Steel Tubular Stub Columns after Corrosion

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 795 ◽  
Author(s):  
Fengjie Zhang ◽  
Junwu Xia ◽  
Guo Li ◽  
Zhen Guo ◽  
Hongfei Chang ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Ultimate Load ◽  
Steel Tube ◽  
Parameter Analysis ◽  
Loading Test ◽  
Steel Tubes ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Thin Walled ◽  
Stub Columns

This work aimed to investigate the effects of steel tube corrosion on the axial ultimate load-bearing capacity (AULC) of circular thin-walled concrete-filled steel tubular (CFST) members. Circular thin-walled CFST stub column specimens were made of steel tubes with various wall-thicknesses. These CFST column specimens were subjected to an accelerated corrosion test, where the steel tubes were corroded to different degrees of corrosion. Then, these CFST specimens with corroded steel tubes experienced an axial static loading test. Results show that the failure patterns of circular thin-walled CFST stub columns with corroded steel tubes are different from those of the counterpart CFST columns with ordinary wall-thickness steel tubes, which is a typical failure mode of shear bulging with slight local outward buckling. The ultimate strength and plastic deformation capacity of the CFST specimens decreased with the increasing degree of steel corrosion. The failure modes of the specimens still belonged to ductile failure because of the confinement of outer steel tube. The degree of steel tube corrosion, diameter-to-thickness ratio, and confinement coefficient had substantial influences on the AULC and the ultimate compressive strength of circular thin-walled CFST stub columns. A simple AULC prediction model for corroded circular thin-walled CFST stub columns was presented through the regression of the experimental data and parameter analysis.

scholarly journals Numerical modelingof a composite section element from thin-walled profiles taking into account the initial geometric imperfections

2020 ◽  
Vol 17 (1) ◽  
pp. 82-86
Author(s):  
D. A. Prostakishina ◽  
◽  
N. D. Korsun ◽  
Keyword(s):  
Bearing Capacity ◽  
Compressive Force ◽  
Stability Loss ◽  
Load Bearing Capacity ◽  
Geometric Imperfections ◽  
Load Bearing ◽  
Composite Section ◽  
Initial Geometric Imperfections ◽  
Thin Walled ◽  
The Stability

The article describes the process of numerical simulation of a composite symmetric section element made of thin-walled Sigma profiles operating under conditions of longitudinal compressive force with bending, taking into account the initial geometric imperfections. At numerical modeling, the main criterion of the load-bearing capacity exhaustion in case of eccentric compression is the stability loss in one of the forms. However, for thin-walled elements, the loss of local stability does not mean that the load-bearing capacity is completely exhausted, since the element continues to carry the load, but to a lesser extent. Therefore, simulation was carried out in two stages: initially, in the elastic formulation, the possible buckling modes were determined, afterwards, there was made calculation on the deformed pattern taking into account possible imperfections.

Sign in / Sign up

Export Citation Format

Share Document