Effect of temperature and loading rate on the mechanical properties of steel 12Kh18N10T

1980 ◽  
Vol 12 (7) ◽  
pp. 855-858
Author(s):  
N. V. Filin ◽  
B. A. Kuranov ◽  
M. Yu. Meiseenko ◽  
V. M. Muratov
Keyword(s):  
Mechanical Properties ◽  
Loading Rate ◽  
Effect Of Temperature ◽  
Steel 12Kh18n10t

Effect of nickel on formation of transition layer during liquid-phase aluminizing of titanium

2020 ◽  
pp. 313-317
Author(s):  
A.I. Kovtunov ◽  
Yu.Yu. Khokhlov ◽  
S.V. Myamin
Keyword(s):  
Mechanical Properties ◽  
Liquid Phase ◽  
Intermetallic Layer ◽  
Reaction Diffusion ◽  
Strength Properties ◽  
Effect Of Temperature ◽  
Nickel Concentration ◽  
Aluminum Melt ◽  
Titanium Aluminum ◽  
Titanium Foam

Titanium—aluminum, titanium—foam aluminum composites and bimetals obtained by liquid-phase methods, are increasingly used in industry. At the liquid-phase methods as result of the reaction diffusion of titanium and aluminum is formed transitional intermetallic layer at the phase boundary of the composite, which reduces the mechanical properties of titanium and composite. To reduce the growth rate of the intermetallic layer between the layers of the composite and increase its mechanical properties, it is proposed to alloy aluminum melt with nickel. The studies of the interaction of titanium and molten aluminum alloyed with nickel made it possible to establish the effect of temperature and aluminizing time on the thickness, chemical and phase compositions of the transition intermetallic layer. The tests showed the effect of the temperature of the aluminum melt, the nickel concentration on the strength properties of titanium—aluminum bimetal.

scholarly journals Experimental and Numerical Analysis of the Mechanical Properties of a Pretreated Shape Memory Alloy Wire in a Self-Centering Steel Brace

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 80
Author(s):  
Bo Zhang ◽  
Sizhi Zeng ◽  
Fenghua Tang ◽  
Shujun Hu ◽  
Qiang Zhou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Energy Dissipation ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Loading Rate ◽  
Effective Elastic Modulus ◽  
Maximum Energy ◽  
Numerical Results ◽  
Energy Dissipation Capacity

As a stimulus-sensitive material, the difference in composition, fabrication process, and influencing factors will have a great effect on the mechanical properties of a superelastic Ni-Ti shape memory alloy (SMA) wire, so the seismic performance of the self-centering steel brace with SMA wires may not be accurately obtained. In this paper, the cyclic tensile tests of a kind of SMA wire with a 1 mm diameter and special element composition were tested under multi-working conditions, which were pretreated by first tensioning to the 0.06 strain amplitude for 40 cycles, so the mechanical properties of the pretreated SMA wires can be simulated in detail. The accuracy of the numerical results with the improved model of Graesser’s theory was verified by a comparison to the experimental results. The experimental results show that the number of cycles has no significant effect on the mechanical properties of SMA wires after a certain number of cyclic tensile training. With the loading rate increasing, the pinch effect of the hysteresis curves will be enlarged, while the effective elastic modulus and slope of the transformation stresses in the process of loading and unloading are also increased, and the maximum energy dissipation capacity of the SMA wires appears at a loading rate of 0.675 mm/s. Moreover, with the initial strain increasing, the slope of the transformation stresses in the process of loading is increased, while the effective elastic modulus and slope of the transformation stresses in the process of unloading are decreased, and the maximum energy dissipation capacity appears at the initial strain of 0.0075. In addition, a good agreement between the test and numerical results is obtained by comparing with the hysteresis curves and energy dissipation values, so the numerical model is useful to predict the stress–strain relations at different stages. The test and numerical results will also provide a basis for the design of corresponding self-centering steel dampers.

scholarly journals The Synergistic Effect of Temperature and Loading Rate on Deformation for Thermoplastic Fiber Metal Laminates

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4210
Author(s):  
Kai Jin ◽  
Shanyong Xuan ◽  
Jie Tao ◽  
Yujie Chen
Keyword(s):  
Melting Point ◽  
Softening Point ◽  
Bending Strength ◽  
Loading Rate ◽  
Synergistic Effects ◽  
Effect Of Temperature ◽  
Resin Matrix ◽  
Tension Stress ◽  
Fiber Metal Laminates ◽  
Fiber Metal

The glass fiber reinforced polypropylene/AA2024 hybrid laminates (short for Al/Gf/PP laminates) as structural materials were prepared and formed by hot pressing. The synergistic effects of temperature and loading speed on the laminate deformation under tensile and bending conditions were investigated and analyzed in this study. In tension, stress–strain curves presented bimodal types effected by tensile rates and temperatures. The state of PP resin determines the mechanical behavior of the FMLs. The tensile rate has no effect on FML deformation without heating or over the melting point of PP resin (about 170 °C). The softening point of PP resin (about 100 °C) is characteristic temperature. When the temperature exceeds the softening point but does not reach the melting point, the tensile strength and elongation will demonstrate coordinated growth at a relatively high tensile speed. The efficiency of fiber bridging is affected significantly since the resin is the medium that transfers load from the metal to the fiber. Under bending, the curves presented a waterfall decrement with temperature increment. The softening point of resin matrix is the key in a bending process. When the temperature is near the softening point, deformation is sensitive to both the temperature and the loading speed to a certain extent. If temperature is lower than softening point, deformation is mainly guided by temperature. If the temperature is beyond the softening point, loading speed is in a leading position of deformation. The bending strength gradually increases with loading rate. By using these deformation characteristics, the deformation of the thermoplastic laminates can be controlled in stamping or other plastic forming processes for thermoplastic fiber metal laminates.

scholarly journals The effect of temperature and drawing ratio on the mechanical properties of polypropylene monofilaments

2014 ◽  
Author(s):  
Hesam Taheri ◽  
João Miguel Nóbrega ◽  
Pieter Samyn ◽  
José Antonio Covas
Keyword(s):  
Mechanical Properties ◽  
Effect Of Temperature ◽  
Drawing Ratio

Effect of Temperature on the Structure and Mechanical Properties of Mechanically Alloyed Al-Nio Composite

2014 ◽  
Vol 59 (1) ◽  
pp. 121-126
Author(s):  
M. Zygmunt-Kiper ◽  
L. Blaz ◽  
M. Sugamata
Keyword(s):  
Mechanical Properties ◽  
Aluminum Oxide ◽  
Aluminum Matrix ◽  
Hot Extrusion ◽  
Effect Of Temperature ◽  
Compression Tests ◽  
Mechanically Alloyed ◽  
Structure Morphology ◽  
High Purity Aluminum ◽  
Extrusion Method

Abstract Mechanical alloying of high-purity aluminum and 10 wt.% NiO powders combined with powder vacuum compression and following hot extrusion method was used to produce an Al-NiO composite. Mechanical properties of as-extruded materials as well as the samples annealed at 823 K /6 h, were tested by compression at 293 K - 770 K. High mechanical properties of the material were attributed to the highly refined structure of the samples. It was found that the structure morphology was practically not changed during hot-compression tests. Therefore, the effect of deformation temperature on the hardness of as-deformed samples was very limited. The annealing of samples at 823 K/6 h induced a chemical reaction between NiO-particles and surrounding aluminum matrix. As a result, the development of very fine aluminum oxide and Al3Ni grains was observed.

scholarly journals Effect Of Temperature On The Mechanical Properties Of Fibronectin

2009 ◽  
Vol 96 (3) ◽  
pp. 641a
Author(s):  
Isaac T.S. Li ◽  
Gilbert C. Walker
Keyword(s):  
Mechanical Properties ◽  
Effect Of Temperature
Sign in / Sign up

Export Citation Format

Share Document