Initiation of liquid explosives with impact in a ram impact machine by the method of a lifted roller

1977 ◽  
Vol 13 (2) ◽  
pp. 200-205 ◽  
Author(s):  
A. A. Denisaev ◽  
A. V. Dubovik ◽  
V. K. Bobolev
Keyword(s):  
Impact Machine ◽  
Liquid Explosives

scholarly journals Effect of reinforcement material on impact properties of epoxy

2017 ◽  
Vol 2 (3) ◽  
pp. 226-231
Author(s):  
Basim M. Fadhil ◽  
Payman Sahbah Ahmed ◽  
Ava Ali Kamal
Keyword(s):  
Carbon Fiber ◽  
Impact Test ◽  
Steel Fiber ◽  
Matrix Composites ◽  
Impact Machine ◽  
Impact Properties ◽  
Different Types ◽  
Experimental Works ◽  
Impact Characteristics ◽  
The Impact

Impact characteristics of Epoxy matrix composites is investigated by impact machine. Four different types of reinforcement are used in the experimental works: type one: 1.9wt% steel fiber, 1.9wt% carbon fiber,1.9 wt% carbon nanotube, 1.9 wt% woven carbon fiber.This work shows that reinforcing epoxy with (1.9 wt% of woven carbon fiber) improves the impact properties where energy, force and deformation values of impact test for this composite were 18.4J, 3580.59 N and 18 mm respectively while for epoxy were 2.927 J, 921.849 N and 18.413 mm respectively.

Impact Testing of Concrete Using a Drop-Weight Impact Machine

2015 ◽  
Vol 1106 ◽  
pp. 225-228 ◽  
Author(s):  
Stanislav Rehacek ◽  
Petr Hunka ◽  
David Citek ◽  
Jiri Kolisko ◽  
Ivo Simunek
Keyword(s):  
Positive Impact ◽  
Impact Load ◽  
Impact Testing ◽  
Impact Loads ◽  
Test Machine ◽  
Impact Machine ◽  
Drop Weight ◽  
Weight Test ◽  
Load Tests ◽  
Drop Weight Test

Fibre-reinforced composite materials are becoming important in many areas of technological application. In addition to the static load, such structures may be stressed with short-term dynamic loads or even dynamic impact loads during their lifespan. Impact loading of structural components produces a complex process, where both the characteristics of the design itself and the material parameters influence the resultant behavior. It is clear that fibre reinforced concrete has a positive impact on increasing of the resistance to impact loads. Results of two different impact load tests carried out on drop-weight test machine are presented in this report.

Development and characterization of structural adhesives for aerospace industry with alumina nanoparticles under shear and thermo-mechanical impact loads

2019 ◽  
Vol 234 (2) ◽  
pp. 490-507 ◽  
Author(s):  
UA Khashaba ◽  
Ramzi Othman ◽  
Ismael MR Najjar
Keyword(s):  
Contact Force ◽  
Bending Stiffness ◽  
Alumina Nanoparticles ◽  
Absorbed Energy ◽  
Impact Machine ◽  
Impact Properties ◽  
Weight Percentage ◽  
Mechanical Impact ◽  
Impact Bending ◽  
The Impact

The present work aims to improve the mechanical properties of Epocast 50-A1/946 epoxy via incorporation of alumina nanoparticles using an ultrasonic agitation method. The optimum weight percentage of alumina nanoparticles was determined based on the improvement in the shear and impact properties of the nanocomposites at room temperature and 50 ℃. Accordingly, neat epoxy panels and nanocomposite panels with 0.5, 1.0, 1.5, and 2.0 wt% alumina nanoparticles were fabricated. The shear and thermo-mechanical impact properties of the panels were measured using an instrumented drop-weight impact machine and an Iosipescu shear test fixture, respectively, according to ASTMs D5379 and D7136. The maximum improvement in shear strength and modulus was 10.9% and 8.1%, respectively, for the nanocomposites containing 1.0 and 1.5 wt% alumina nanoparticles. The predicted shear moduli of the nanocomposites agreed well with the measured values with a maximum error of 6.52%. The optimal performance of impact properties was achieved by incorporating 1.0 wt% of alumina nanoparticles. Namely, the maximum impact-bending stiffness, contact force, and absorbed energy were increased by 12.9%, 13.0%, and 23.4%, respectively. The test temperature of 50 ℃ was found to have a negative effect on the impact-bending stiffness and the maximum contact force. On the other hand, the absorbed energy was increased up to 12.1%.

Sign in / Sign up

Export Citation Format

Share Document