Fibre volume fraction determination of carbon-epoxy composites using an acid digestion bomb

1991 ◽  
Vol 10 (19) ◽  
pp. 1162-1164 ◽  
Author(s):  
P. Green
Keyword(s):  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Epoxy Composites ◽  
Acid Digestion ◽  
Fraction Determination

scholarly journals Insulation Characteristics of Sisal Fibre/Epoxy Composites

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
A. Shalwan ◽  
M. Alajmi ◽  
A. Alajmi
Keyword(s):  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Thermal Characteristics ◽  
Fibre Volume ◽  
Point Of View ◽  
Natural Fibres ◽  
Epoxy Composites ◽  
Ongoing Research ◽  
Sisal Fibre ◽  
The Impact

Using natural fibres in civil engineering is the aim of many industrial and academics sectors to overcome the impact of synthetic fibres on environments. One of the potential applications of natural fibres composites is to be implemented in insulation components. Thermal behaviour of polymer composites based on natural fibres is recent ongoing research. In this article, thermal characteristics of sisal fibre reinforced epoxy composites are evaluated for treated and untreated fibres considering different volume fractions of 0–30%. The results revealed that the increase in the fibre volume fraction increased the insulation performance of the composites for both treated and untreated fibres. More than 200% insulation rate was achieved at the volume fraction of 20% of treated sisal fibres. Untreated fibres showed about 400% insulation rate; however, it is not recommended to use untreated fibres from mechanical point of view. The results indicated that there is potential of using the developed composites for insulation purposes.

scholarly journals Strain Rate Effects on Tensile and Compressive Behaviour of Woven-Knitting Glass/Epoxy Composites

2013 ◽  
Vol 22 (1) ◽  
pp. 096369351302200 ◽  
Author(s):  
Mehmet Aktas ◽  
H. Ersen Balcioğlu ◽  
Gürhan Külahli
Keyword(s):  
Strain Rate ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Testing Machine ◽  
Fibre Volume ◽  
Woven Fabric ◽  
Epoxy Composites ◽  
Compressive Properties ◽  
Compressive Behaviour ◽  
Low Strain Rate

The main purpose of this study was to investigate the tensile and compressive behaviour of woven-knitting glass/epoxy composites under low strain rate by using UTEST testing machine with capacity of 50kN. The strain rate values were selected as 0.005, 0.0005 and 0.00005s−1. The effect of knitting direction as wale, course and 45° and knitting structure as rib and milano on the tensile and compressive behaviour of woven-knitting glass/epoxy composites under low strain rate was also discussed. The woven-knitting composite samples were tested under uni-axial tensile and compressive loading. The woven-knitting composites have eight layer with woven fabric (W), rib (R) and milano (M) knitting fabrics as (W2/R2)S and (W2/M2)S. The woven-knitting composites were manufactured by hand lay-up method. The fibre volume fraction and thickness of manufactured woven-knitting composites were measured 65% in weight and 2.9mm, respectively. The experimental results showed that the tensile and compressive properties of woven-knitting glass/epoxy composites decrease from 0.005 s−1 to 0.00005s−1. The tensile properties in all directions of plate with rib knitting were obtained higher than the plate with milano knitting. However, the highest compressive properties were obtained from plate with rib knitting in course direction.

Volume fraction determination of Kevlar 49/epoxy composites

1979 ◽  
Vol 19 (13) ◽  
pp. 907-909 ◽  
Author(s):  
Ronald E. Allred ◽  
Nancy H. Hall
Keyword(s):  
Volume Fraction ◽  
Epoxy Composites ◽  
Fraction Determination

An experimental study on the interdependence of mercerization, moisture absorption and mechanical properties of sustainable Phoenix sp. fibre-reinforced epoxy composites

2018 ◽  
Vol 49 (9) ◽  
pp. 1233-1251 ◽  
Author(s):  
G Rajeshkumar
Keyword(s):  
Mechanical Properties ◽  
Moisture Absorption ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Length ◽  
Fibre Volume ◽  
Epoxy Composites ◽  
Compression Moulding ◽  
Fibre Matrix ◽  
Fibre Reinforced Composites

This paper represents the first effort aimed to study the interdependence of mercerization, moisture absorption and mechanical properties of sustainable Phoenix sp. fibre-reinforced epoxy composites fabricated by compression moulding technique. The investigation was carried out by varying the fibre length (10, 20 and 30 mm), fibre volume fraction (10%, 20%, 30%, 40% and 50%), concentration of sodium hydroxide for fibre treatment (5%, 10% and 15%) and immersion temperature (10℃, 30℃ and 60℃). The fibre–matrix interface and failure mechanism was studied by using scanning electron microscopy. The results revealed that the moisture absorption rate increased with the increase in fibre length, fibre volume fraction and immersion temperature result in loss of tensile and flexural properties. The moisture absorbed samples shows 15% and 7% drop in tensile and flexural strength, respectively. However, this loss was less in mercerized fibre-reinforced composites.

scholarly journals Flexural Mechanical Properties of Hybrid Epoxy Composites Reinforced with Nonwoven Made of Flax Fibres and Recycled Carbon Fibres

Aerospace ◽  
2018 ◽  
Vol 5 (4) ◽  
pp. 107 ◽  
Author(s):  
Jens Bachmann ◽  
Martin Wiedemann ◽  
Peter Wierach
Keyword(s):  
Mechanical Properties ◽  
Hybrid Composite ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Natural Fibres ◽  
Epoxy Composites ◽  
Carbon Fibres ◽  
Reinforced Polymers ◽  
Flax Fibres

Can a hybrid composite made of recycled carbon fibres and natural fibres improve the flexural mechanical properties of epoxy composites compared to pure natural fibre reinforced polymers (NFRP)? Growing environmental concerns have led to an increased interest in the application of bio-based materials such as natural fibres in composites. Despite their good specific properties based on their low fibre density, the application of NFRP in load bearing applications such as aviation secondary structures is still limited. Low strength NFRP, compared to composites such as carbon fibre reinforced polymers (CFRP), have significant drawbacks. At the same time, the constantly growing demand for CFRP in aviation and other transport sectors inevitably leads to an increasing amount of waste from manufacturing processes and end-of-life products. Recovering valuable carbon fibres by means of recycling and their corresponding re-application is an important task. However, such recycled carbon fibres (rCF) are usually available in a deteriorated (downcycled) form compared to virgin carbon fibres (vCF), which is limiting their use for high performance applications. Therefore, in this study the combination of natural fibres and rCF in a hybrid composite was assessed for the effect on flexural mechanical properties. Monolithic laminates made of hybrid nonwoven containing flax fibres and recycled carbon fibres were manufactured with a fibre volume fraction of 30% and compared to references with pure flax and rCF reinforcement. Three-point bending tests show a potential increase in flexural mechanical properties by combining rCF and flax fibre in a hybrid nonwoven.

Effect of fibre content on the mechanical properties of hemp fibre woven fabrics/polypropylene composite laminates

2021 ◽  
pp. 096739112110239
Author(s):  
Sheedev Antony ◽  
Abel Cherouat ◽  
Guillaume Montay
Keyword(s):  
Mechanical Properties ◽  
Polymer Matrix ◽  
Composite Laminates ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Woven Fabrics ◽  
Fibre Content ◽  
Viscoelastic Behaviour ◽  
Hemp Fibre

Nowadays natural fibre composites have gained great significance as reinforcements in polymer matrix composites. Composite material based on a polymer matrix reinforced with natural fibres is extensively used in industry due to their biodegradability, recyclability, low density and high specific properties. A study has been carried out here to investigate the fibre volume fraction effect of hemp fibre woven fabrics/PolyPropylene (PP) composite laminates on the tensile properties and impact hammer impact test. Initially, composite sheets were fabricated by the thermal-compression process with desired number of fabric layers to obtain composite laminates with different fibre volume fraction. Uniaxial, shear and biaxial tensile tests were performed and mechanical properties were calculated. Impact hammer test was also carried out to estimate the frequency and damping parameters of stratified composite plates. Scanning Electron Microscope (SEM) analysis was performed to observe the matrix and fibre constituent defects. Hemp fabrics/PP composite laminates exhibits viscoelastic behaviour and as the fibre volume fraction increases, the viscoelastic behaviour decreases to elastic behaviour. Due to this, the tensile strength increases as the fibre content increases. On the other hand, the natural frequency increases and damping ratio decrease as the fibre volume fraction increases.

New Development of Cattail Fibre in Composite Uses

2013 ◽  
Vol 746 ◽  
pp. 385-389
Author(s):  
Li Yan Liu ◽  
Yu Ping Chen ◽  
Jing Zhu
Keyword(s):  
Mechanical Properties ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Environmental Benefits ◽  
Bending Properties ◽  
New Development ◽  
Original Plant ◽  
Reinforcing Material ◽  
Pp Composites

This paper is aiming to develop the cattail fibre as reinforcing material due to its environmental benefits and excellent physical and insulated characteristics. The current work is concerned with the development of the technical fibres from the original plant and research on their reinforcing properties in the innovative composites. Polypropylene (PP) fibre was used as matrix in this research which was fabricated into fibre mats with cattail fibre together with different fibre volume fractions. Cattail fibre reinforced PP laminates were manufactured and compared with jute/PP composites. The tensile and bending properties of laminates were tested. The SEM micrographs of fracture surface of the laminates were analyzed as well. The results reveal that the tensile and bending properties of cattail/PP laminates are closed to those of jute/PP composites. The mechanical properties of cattail/jute/PP laminates with fibre volume fraction of 20/35/45 is betther than those of laminate reinforced with cattail fibers.

scholarly journals The Mechanical Properties of Steel-Polypropylene Fibre Composites Concrete (HyFRCC)

2015 ◽  
Vol 773-774 ◽  
pp. 949-953 ◽  
Author(s):  
Izni Syahrizal Ibrahim ◽  
Wan Amizah Wan Jusoh ◽  
Abdul Rahman Mohd Sam ◽  
Nur Ain Mustapa ◽  
Sk Muiz Sk Abdul Razak
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Concrete Strength ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Polypropylene Fibre ◽  
Experimental Results

This paper discusses the experimental results on the mechanical properties of hybrid fibre reinforced composite concrete (HyFRCC) containing different proportions of steel fibre (SF) and polypropylene fibre (PPF). The mechanical properties include compressive strength, tensile strength, and flexural strength. SF is known to enhance the flexural and tensile strengths, and at the same time is able to resist the formation of macro cracking. Meanwhile, PPF contributes to the tensile strain capacity and compressive strength, and also delay the formation of micro cracks. Hooked-end deformed type SF fibre with 60 mm length and fibrillated virgin type PPF fibre with 19 mm length are used in this study. Meanwhile, the concrete strength is maintained for grade C30. The percentage proportion of SF-PPF fibres are varied in the range of 100-0%, 75-25%, 50-50%, 25-75% and 0-100% of which the total fibre volume fraction (Vf) is fixed at 0.5%. The experimental results reveal that the percentage proportion of SF-PPF fibres with 75-25% produced the maximum performance of flexural strength, tensile strength and flexural toughness. Meanwhile, the percentage proportion of SF-PPF fibres with 100-0% contributes to the improvement of the compressive strength compared to that of plain concrete.

Sign in / Sign up

Export Citation Format

Share Document