Combustion rate of heterogeneous condensed systems with large-size particles

1977 ◽  
Vol 12 (4) ◽  
pp. 583-586 ◽  
Author(s):  
�. I. Maksimov
Keyword(s):  
Combustion Rate ◽  
Large Size ◽  
Condensed Systems

scholarly journals Controlling changes in the combustion surface of solid fuel charges through the use of heat-conducting elements

2021 ◽  
pp. 67-75
Author(s):  
S. K. Saveliev ◽  
D. K. Shcheglov
Keyword(s):  
Experimental Data ◽  
Thermal Diffusivity ◽  
Melting Point ◽  
Combustion Rate ◽  
Regression Models ◽  
Combustion Surface ◽  
Heat Conducting ◽  
Variation Range ◽  
Crystalline Forms ◽  
Condensed Systems

On the basis of experimental data on the local values of the combustion rate of condensed systems along the heat-conducting filaments placed therein, regression models were constructed to relate the value of the local combustion rate with such characteristics of heat-conducting filaments as the thermal diffusivity and melting point. The obtained regression model was used to assess a possible expansion of the variation range of the local combustion rate when using various crystalline forms of CVD diamonds as heat-conducting filaments. It was shown that a local increase in the combustion rate could exceed the baseline value by 200 times. The possibility of controlling the transformation of the combustion surface by using heat-conducting filaments with variable characteristics was confirmed.

Experimental Determination of High Pressure Combustion Rate of Energy Condensed Systems

2012 ◽  
Author(s):  
Д.А. Ягодников ◽  
◽  
В.В. Козичев ◽  
А.В. Сергеев ◽  
И.В. Гавриленко ◽  
...  
Keyword(s):  
High Pressure ◽  
Experimental Determination ◽  
Combustion Rate ◽  
Condensed Systems

Differential method for measuring the combustion rate of condensed systems in a manometric chamber

1979 ◽  
Vol 15 (2) ◽  
pp. 199-203 ◽  
Author(s):  
V. S. Aksenov ◽  
G. N. Leonov ◽  
A. V. Lyubimov ◽  
A. K. Parfenov ◽  
V. M. Chikov
Keyword(s):  
Combustion Rate ◽  
Differential Method ◽  
Condensed Systems

Coherency loss in γ' precipitates in nickel-base superalloy

1983 ◽  
Vol 41 ◽  
pp. 244-245
Author(s):  
R. A. Ricks ◽  
Angus J. Porter
Keyword(s):  
Lattice Mismatch ◽  
Lattice Parameter ◽  
Nickel Base Superalloy ◽  
Large Size ◽  
The Matrix ◽  
Nimonic 80A ◽  
Interfacial Dislocations ◽  
Nickel Base ◽  
Coherency Loss ◽  
Nimonic 115

During a recent investigation concerning the growth of γ' precipitates in nickel-base superalloys it was observed that the sign of the lattice mismatch between the coherent particles and the matrix (γ) was important in determining the ease with which matrix dislocations could be incorporated into the interface to relieve coherency strains. Thus alloys with a negative misfit (ie. the γ' lattice parameter was smaller than the matrix) could lose coherency easily and γ/γ' interfaces would exhibit regularly spaced networks of dislocations, as shown in figure 1 for the case of Nimonic 115 (misfit = -0.15%). In contrast, γ' particles in alloys with a positive misfit could grow to a large size and not show any such dislocation arrangements in the interface, thus indicating that coherency had not been lost. Figure 2 depicts a large γ' precipitate in Nimonic 80A (misfit = +0.32%) showing few interfacial dislocations.

Automatic analysis of Kikuchi diffraction patterns

1994 ◽  
Vol 52 ◽  
pp. 900-901
Author(s):  
H. Weiland ◽  
D. P. Field
Keyword(s):  
Electron Beam ◽  
Electron Microscope ◽  
Spatial Resolution ◽  
Relevant Information ◽  
Crystalline Materials ◽  
Large Size ◽  
Transmission Electron ◽  
New Type ◽  
Diffraction Patterns ◽  
Orientation Determination

Recent advances in the automatic indexing of backscatter Kikuchi diffraction patterns on the scanning electron microscope (SEM) has resulted in the development of a new type of microscopy. The ability to obtain statistically relevant information on the spatial distribution of crystallite orientations is giving rise to new insight into polycrystalline microstructures and their relation to materials properties. A limitation of the technique in the SEM is that the spatial resolution of the measurement is restricted by the relatively large size of the electron beam in relation to various microstructural features. Typically the spatial resolution in the SEM is limited to about half a micron or greater. Heavily worked structures exhibit microstructural features much finer than this and require resolution on the order of nanometers for accurate characterization. Transmission electron microscope (TEM) techniques offer sufficient resolution to investigate heavily worked crystalline materials.Crystal lattice orientation determination from Kikuchi diffraction patterns in the TEM (Figure 1) requires knowledge of the relative positions of at least three non-parallel Kikuchi line pairs in relation to the crystallite and the electron beam.

Immunoprobe localization in mammalian embryos

1990 ◽  
Vol 48 (3) ◽  
pp. 32-33
Author(s):  
Patricia G. Calarco ◽  
Margaret C. Siebert
Keyword(s):  
Electron Microscopy ◽  
Endoplasmic Reticulum ◽  
Thin Sections ◽  
Relative Lack ◽  
Large Size ◽  
Mammalian Embryos ◽  
Antigen Localization ◽  
Difficult Challenge ◽  
Lowicryl K4m ◽  
Fertilized Egg

Visualization of preimplantation mammalian embryos by electron microscopy is difficult due to the large size of the ircells, their relative lack of internal structure, and their highly hydrated cytoplasm. For example, the fertilized egg of the mouse is a single cell of approximately 75μ in diameter with little organized cytoskelet on and apaucity ofor ganelles such as endoplasmic reticulum (ER) and Golgi material. Thus, techniques that work well on tissues or cell lines are often not adaptable to embryos at either the LM or EM level.Over several years we have perfected techniques for visualization of mammalian embryos by LM and TEM, SEM and for the pre-embedding localization of antigens. Post-embedding antigenlocalization in thin sections of mouse oocytes and embryos has presented a more difficult challenge and has been explored in LR White, LR Gold, soft EPON (after etching of sections), and Lowicryl K4M. To date, antigen localization has only been achieved in Lowicryl-embedded material, although even with polymerization at-40°C, the small ER vesicles characteristic of embryos are unrecognizable.

Vibration Isolator System for Electron Microscope

1990 ◽  
Vol 48 (1) ◽  
pp. 182-183
Author(s):  
K. Ohi ◽  
M. Mizuno ◽  
T. Kasai ◽  
Y. Ohkura ◽  
K. Mizuno ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Magnetic Fields ◽  
Environmental Conditions ◽  
Vibration Isolator ◽  
Air Conditioners ◽  
Vibration Isolators ◽  
Large Size ◽  
Electron Microscopes

In recent years, with electron microscopes coming into wider use, their installation environments do not necessarily give their performance full play. Their environmental conditions include air-conditioners, magnetic fields, and vibrations. We report a jointly developed entirely new vibration isolator which is effective against the vibrations transmitted from the floor.Conventionally, large-sized vibration isolators which need the digging of a pit have been used. These vibration isolators, however, are large present problems of installation and maintenance because of their large-size.Thus, we intended to make a vibration isolator which1) eliminates the need for changing the installation room2) eliminates the need of maintenance and3) are compact in size and easily installable.

Sign in / Sign up

Export Citation Format

Share Document