Hot and cold rolling of electrical steels �0100?�0300

Metallurgist ◽  
1972 ◽  
Vol 16 (6) ◽  
pp. 421-422
Author(s):  
M. G. Anan'evskii ◽  
N. G. Bochkov ◽  
Ya. A. Burshtein ◽  
L. I. Butylkina ◽  
S. A. Shirinskaya ◽  
...  
Keyword(s):  
Cold Rolling ◽  
Electrical Steels ◽  
Hot And Cold Rolling

Superplastic Behaviour of AA5083 Aluminium Alloy with Scandium and Zirconium

2012 ◽  
Vol 706-709 ◽  
pp. 395-401 ◽  
Author(s):  
A. Smolej ◽  
B. Skaza ◽  
B. Markoli ◽  
Damjan Klobčar ◽  
V. Dragojević ◽  
...  
Keyword(s):  
Cold Rolling ◽  
Strain Rate ◽  
Aluminium Alloy ◽  
Wide Temperature Range ◽  
Initial Strain Rate ◽  
Initial Strain ◽  
Strain Rates ◽  
Superplastic Behaviour ◽  
Hot And Cold Rolling ◽  
Superplastic Properties

The aim of the present investigation was to determine and to compare the superplastic behaviour of the AA5083 (Al-Mg-Mn) alloy with Sc and Zr additions. The investigated alloys were processed to form sheets by conventional hot and cold rolling. The superplastic properties were determined with strain rates in the range of 1x10-4to 5x10-2s-1and forming temperatures of 350 to 550°C. The results showed that the alloy with about 0.4% Sc exhibited a high superplastic ductility across a wide temperature range and strain rates up to 1x10-2s-1. The highest elongations to failure of about 2000% were attained at 550°C and at an initial strain rate of 5x10-3s-1. However, the alloy with about 0.15% Zr exhibited elongations up to 600%. The FSP processed Al-4.5Mg alloy with combined addition of about 0.2% Sc and 0.15% Zr exhibited good superplastic properties at higher strain rates (> 1x10-2s-1) with elongations up to 1500%.

scholarly journals Change in Earing of Low-carbon Aluminum-killed Steel Sheets with Hot- and Cold-rolling Conditions.

2000 ◽  
Vol 40 (4) ◽  
pp. 409-417 ◽  
Author(s):  
Hidekuni Murakami ◽  
Tomoji Kumano ◽  
Takehide Senuma
Keyword(s):  
Cold Rolling ◽  
Low Carbon ◽  
Steel Sheets ◽  
Hot And Cold Rolling

Texture Evolution and Earing in Aluminium Can Sheet

2005 ◽  
Vol 495-497 ◽  
pp. 1565-1572 ◽  
Author(s):  
Jürgen Hirsch
Keyword(s):  
Fourier Series ◽  
Cold Rolling ◽  
Series Expansion ◽  
Deep Drawing ◽  
Recrystallization Texture ◽  
Texture Evolution ◽  
Processing Parameters ◽  
New Method ◽  
Fourier Series Expansion ◽  
Hot And Cold Rolling

The texture evolution during hot and cold rolling of AlMg1Mn1 can body sheet is described and the related anisotropy effects during deep drawing are analysed quantitatively. The typical textures of rolled aluminium show the transition between ß-fibre orientations and cube recrystallization texture, depending on rolling temperature and strain. These correlate with transitions between 45° and 0°/90° ear heights in deep drawn cups which are described by a new method of Fourier series expansion. Processing parameters to achieve low anisotropy are discussed.

Improving magnetic properties of non-oriented electrical steels by controlling grain size prior to cold rolling

2019 ◽  
Vol 491 ◽  
pp. 165636 ◽  
Author(s):  
Ling-Zi An ◽  
Yin-ping Wang ◽  
Hong-Yu Song ◽  
Guo-Dong Wang ◽  
Hai-Tao Liu
Keyword(s):  
Grain Size ◽  
Magnetic Properties ◽  
Cold Rolling ◽  
Electrical Steels

Thermal camber model for hot and cold rolling

1996 ◽  
Vol 67 (1) ◽  
pp. 18-21 ◽  
Author(s):  
Wolfgang Sauer
Keyword(s):  
Cold Rolling ◽  
Hot And Cold Rolling

Texture and Microstructure Evolution during Box Annealing of a Non-Oriented-Grain Electrical Steel

2011 ◽  
Vol 702-703 ◽  
pp. 595-598
Author(s):  
Francisco N.C. Freitas ◽  
Manoel Ribeiro da Silva ◽  
Sergio S.M. Tavares ◽  
Hamilton F.G. Abreu
Keyword(s):  
Grain Size ◽  
Magnetic Properties ◽  
Cold Rolling ◽  
Crystallographic Texture ◽  
Electrical Steel ◽  
Electron Backscatter Diffraction ◽  
Magnetization Direction ◽  
Electrical Steels ◽  
Cold Rolling And Annealing ◽  
Work Samples

Non-oriented grain type electrical steels are used mainly in electrical rotating machines such as motors and compressors, in which the magnetization direction rotates 360 ° every cycle while remaining in the plane of the plate. The performance of these devices is affected by crystallographic texture of electrical steels due to strong anisotropy of magnetic properties. The electrical steel is supplied in the form of plates which are processed by cold rolling and subsequent annealing. Both, cold rolling and annealing directly influence the formation of crystallographic texture components. During annealing, recrystallization occurs, and this phenomenon gives rise to changes in texture that influences the quality of the final product and its application. Several works have been published in the study of the evolution of crystallographic texture and grain size in this type of electrical steel. In this work, samples have been taken in industrial conditions at various temperatures during the annealing in a coil box. Electrical steel samples cold rolled with reductions of 50% and 70% in thickness were removed during the process of annealing, and the evolution of texture with increasing temperature was studied. Aspects related to recrystallization, grain size and the evolution of texture and magnetic properties were discussed. Texture and recrystallization were studied by X-ray diffraction and electron backscatter diffraction (EBSD). The magnetic properties were measured in a vibrating sample magnetometer.

Sign in / Sign up

Export Citation Format

Share Document