High-temperature stress rupture tests for sintered silicon nitride

1991 ◽  
Vol 10 (20) ◽  
pp. 1202-1204
Author(s):  
A. Okada ◽  
M. Matsunaga ◽  
N. Hirosaki
Keyword(s):  
High Temperature ◽  
Silicon Nitride ◽  
Temperature Stress ◽  
Stress Rupture ◽  
High Temperature Stress ◽  
Sintered Silicon

High Temperature Rupture Life of Nickel-Based Superalloy under Directional Solidification with High Temperature Gradient

2017 ◽  
Vol 898 ◽  
pp. 422-429 ◽  
Author(s):  
Wei Guo Zhang ◽  
Zhi Jie Liu ◽  
Song Ke Feng ◽  
Fu Zeng Yang ◽  
Lin Liu
Keyword(s):  
High Temperature ◽  
Temperature Gradient ◽  
Directional Solidification ◽  
Temperature Stress ◽  
Solidification Rate ◽  
Rupture Life ◽  
Stress Rupture ◽  
High Temperature Stress ◽  
Stress Rupture Life ◽  
Nickel Based Superalloy

The stress rupture life of DZ125 nickel-based superalloy that was prepared by directional solidification process under the temperature gradient of 500 K/cm has been studied at 900°C and 235MPa. The results showed that with the increase of directional solidification rate from 50 μm/s to 800 μm/s, the primary dendrite arm spacing reduced from 94 μm to 35.8 μm and γ' precipitates reduced and more uniformed in size. The high temperature stress rupture life of as-cast sample increased firstly and then decreased and reached its maximum at the solidification rate of 500 μm/s. The dislocation configuration of sample with refine dendritic structure after stress rupture was investigated and discovered that the dislocations in different parts of sample had different morphology and density, which indicated that the deformation of as-cast samples were uneven during high temperature stress rupture. A lot of dislocations intertwined around carbides and at the interface of γ/γ', and the dislocation networks were destroyed and the dislocations entered γ' precipitate by the way of cutting.

Evolution of Stress Failure Resulting from High-Temperature Stress-Corrosion Cracking in a Hot Isostatically Pressed Silicon Nitride

1995 ◽  
Vol 78 (8) ◽  
pp. 2129-2140 ◽  
Author(s):  
Andrew A. Wereszczak ◽  
Mattison K. Ferber ◽  
Timothy P. Kirkland ◽  
Karren L. More ◽  
Michael R. Foley ◽  
...  
Keyword(s):  
High Temperature ◽  
Silicon Nitride ◽  
Stress Corrosion ◽  
Temperature Stress ◽  
Stress Corrosion Cracking ◽  
High Temperature Stress ◽  
Corrosion Cracking

CENTRALLOY 4852 (HP+Nb)

Alloy Digest ◽  
1995 ◽  
Vol 44 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Structural Stability ◽  
Temperature Stress ◽  
Rupture Strength ◽  
Stress Rupture ◽  
High Temperature Stress ◽  
Chromium Alloy

Abstract CENTRALLOY 4852 (HP + Nb) is a cast austenitic 35% nickel-25% chromium alloy plus niobium (columbium). The alloy possesses excellent structural stability, high temperature stress rupture strength, oxidation and carburization resistance. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting and joining. Filing Code: SS-609. Producer or source: Centracero S.A.

Creep and Fracture Behavior of Centrifugal Cast HP40Nb Alloy Containing Lead

2012 ◽  
Author(s):  
Tao Chen ◽  
Xuedong Chen ◽  
Yunrong Lu ◽  
Juan Ye ◽  
Xiaoming Lian
Keyword(s):  
High Temperature ◽  
Temperature Stress ◽  
Centrifugal Casting ◽  
Rupture Life ◽  
Stress Rupture ◽  
Creep Damage ◽  
Threshold Value ◽  
High Temperature Stress ◽  
Furnace Tube ◽  
Technical Specifications

Centrifugal cast HP40Nb alloys are commonly used as ethylene pyrolysis and reformer furnace tube materials. The actual wall temperature can usually reach 1423 K. The technical specifications require that the rupture life shall be at least 120 h under test condition of 1373 K at 17 MPa. The effects of amounts of Lead on the creep and stress rupture performance of the centrifugal cast HP40Nb alloy have been investigated at the temperature of 1373 K and the constant stress of 17 MPa. In this paper, HP40Nb alloy tubes with different contents of Lead element by centrifugal casting were selected, by high temperature stress rupture test and microscopic observation of creep damage, relationship between the content of Lead and high temperature stress rupture lives was given, as well as the threshold value of Lead element. It could provide the basis for ethylene pyrolysis furnace tubes manufacturers and design specifications.

High Temperature Stress Rupture Anisotropy of a Ni-Based Single Crystal Superalloy

2016 ◽  
Vol 32 (10) ◽  
pp. 1003-1007 ◽  
Author(s):  
Guanglei Wang ◽  
Jinlai Liu ◽  
Jide Liu ◽  
Tao Jin ◽  
Xiaofeng Sun ◽  
...  
Keyword(s):  
High Temperature ◽  
Single Crystal ◽  
Temperature Stress ◽  
Stress Rupture ◽  
High Temperature Stress ◽  
Single Crystal Superalloy
Sign in / Sign up

Export Citation Format

Share Document