Determination of the coking capacity of mixtures of high-molecular-weight organic compounds

1991 ◽  
Vol 27 (10) ◽  
pp. 580-582
Author(s):  
M. Yu. Dolomatov ◽  
S. I. Amirova ◽  
Z. F. Kuz'mina ◽  
S. P. Lomakin
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Organic Compounds

scholarly journals Effects of Delayed Sample Processing on Determination of Total and High Molecular Weight (HMW) Adiponectin in Serum and Plasma: A Pilot Study

2016 ◽  
Vol 8 (3) ◽  
pp. 19
Author(s):  
Choaping Ng ◽  
Felicity J Rose ◽  
Sahar Keshvari ◽  
Marina M Reeves ◽  
Goce Dimeski ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Pilot Study ◽  
High Molecular Weight ◽  
Accurate Determination ◽  
Mean Difference ◽  
Serum Samples ◽  
Blood Samples ◽  
Hmw Adiponectin ◽  
Total Adiponectin

<p>Adiponectin is a beneficial adipocyte-secreted hormone, which circulates in a variety of multimeric forms termed low and high molecular weight (LMW/HMW). Effectiveness of clinical therapeutic trials which target adiponectin rely on accurate determination of circulating total and HMW adiponectin levels but the accuracy may be influenced by variations in sample handling processes. The aim of this pilot study was to investigate the effects of delayed processing of blood samples on the concentration of total and HMW adiponectin.</p><p>Materials and Methods: Fasting blood samples were collected for analysis of total and HMW adiponectin concentrations in EDTA plasma and serum from eight healthy participants.  Samples were centrifuged post 15 min storage at 4<sup>o</sup>C as the comparative ‘ideal’ method or after up to 72 h of refrigerated storage or 6 h at room temperature. Total and HMW adiponectin concentrations were measured by ELISA.</p><p>Results: Under ideal handling conditions measurements of total and HMW adiponectin concentrations were significantly higher in serum than in plasma (mean difference: -1.3 µg/mL [95% CI: -1.6, -1.0], p&lt;0.001; and, -0.6 µg/mL [95% CI: -0.7, -0.5], p&lt;0.001, respectively).  Storage of blood samples at 4<sup>o</sup>C for 72 h resulted in significant reductions in concentration of total adiponectin in serum (mean difference: -1.4 µg/mL [95% CI: -2.0, -0.8], p=0.001) and HMW adiponectin in plasma (mean difference: -0.6 µg/mL [95%CI: -0.9, -0.2], p=0.007), compared with ideal conditions.  Further analysis of serum samples showed a significant decrease in total adiponectin concentration after 6 h storage at 4<sup>o</sup>C (mean difference: -1.4 µg/mL [95% CI: -2.0, -0.8], p=0.001) compared with ideal conditions.</p><p>Conclusions: Delayed processing of samples may have differential effects on the concentration of total and HMW adiponectin in serum or plasma. Larger studies are warranted for clinical intervention trials.</p>

Determination of Peroxides in Synthetic Rubbers

1945 ◽  
Vol 18 (4) ◽  
pp. 874-876
Author(s):  
Richard F. Robey ◽  
Herbert K. Wiese
Keyword(s):  
Molecular Weight ◽  
Natural Rubber ◽  
Quantitative Determination ◽  
High Molecular Weight ◽  
Active Oxygen ◽  
Lower Molecular Weight ◽  
Synthetic Rubber ◽  
High Molecular Weight Polymers ◽  
Methanol Solutions

Abstract Peroxides are found in synthetic rubbers either as the result of attack by oxygen, usually from the air, or as a residue from polymerization operations employing peroxide catalysts. Because of possible detrimental effects of active oxygen on the properties of the rubber, a method of quantitative determination is needed. The concentration of peroxides in substances of lower molecular weight may be determined with ferrous thiocyanate reagent, either titrimetrically as recommended by Yule and Wilson or colorimetrically as by Young, Vogt, and Nieuwland. Unfortunately, many highly polymeric substances are not soluble in the acetone and methanol solutions employed in these procedures. This is also the case with hydrocarbon monomers, such as butadiene, containing appreciable concentrations of soluble high molecular weight polymers. Bolland, Sundralingam, Sutton and Tristram recommended benzene as a solvent for natural rubber samples and the reagent made up in methanol. However, most synthetic rubbers are not readily soluble even in this combination. The following procedure employs the ferrous thiocyanate reagent in combination with a solvent capable of maintaining considerable concentrations of synthetic rubber in solution. The solvent comprises essentially 20 per cent ethanol in chloroform.

Sign in / Sign up

Export Citation Format

Share Document