Study of surface morphology and elemental analysis in BiSrCaCu2O x superconductors

1990 ◽  
Vol 9 (8) ◽  
pp. 906-908 ◽  
Author(s):  
S. K. Sharma ◽  
N. Kumar
MRS Advances ◽  
2016 ◽  
Vol 1 (47) ◽  
pp. 3207-3213 ◽  
Author(s):  
John P. Murphy ◽  
Jessica M. Andriolo ◽  
Brandon M. Ross ◽  
Gary F. Wyss ◽  
Nicole E. Zander ◽  
...  

ABSTRACTA new organometallic halide perovskite (OHP) synthesis method, whereby a polymer melt is used to thermodynamically drive the reaction that forms OHP crystallites, is demonstrated. The synthesis method allows for the facile encapsulation of moisture-sensitive OHP without the loss of simplicity during fabrication, which makes OHP materials so attractive for the photovoltaic industry. Degradation of OHP crystallites embedded in a polystyrene matrix was studied using UV-Vis absorbance over a period of several days. The OHP crystallites degrade as a result of the reversible nature of the reaction that forms the crystallites. After the reversion to precursors (PbI2 and CH3NH3I) the CH3NH3I irreversibly degrades [2] allowing the degradation to be tracked via optical interrogation. Additionally, surface morphology and elemental analysis of fabricated samples was carried out using SEM/EDS techniques.


Author(s):  
Li C.L. ◽  
Chew E.C. ◽  
Huang D.P. ◽  
Ho H.C. ◽  
Mak L.S. ◽  
...  

An epithelial cell line, NPC/HK1, has recently been successfully established from a nasopharyngeal carcinoma of the moderately to well differentiated squamous type. The present communication reports on the surface morphology of the NPC/HK1 cells in culture.


Author(s):  
R. F. Egerton

An important parameter governing the sensitivity and accuracy of elemental analysis by electron energy-loss spectroscopy (EELS) or by X-ray emission spectroscopy is the signal/noise ratio of the characteristic signal.


Author(s):  
B. J. Panessa-Warren ◽  
J. B. Warren ◽  
H. W. Kraner

Our previous studies have demonstrated that abnormally high amounts of calcium (Ca) and zinc (Zn) can be accumulated in human retina-choroid under pathological conditions and that barium (Ba), which was not detected in the eyes of healthy individuals, is deposited in the retina pigment epithelium (RPE), and to a lesser extent in the sensory retina and iris. In an attempt to understand how these cations can be accumulated in the vertebrate eye, a morphological and microanalytical study of the uptake and loss of specific cations (K, Ca,Ba,Zn) was undertaken with incubated Rana catesbiana isolated retina and RPE preparations. Large frogs (650-800 gms) were dark adapted, guillotined and their eyes enucleated in deep ruby light. The eyes were hemisected behind the ora serrata and the anterior portion of the eye removed. The eyecup was bisected along the plane of the optic disc and the two segments of retina peeled away from the RPE and incubated.


Author(s):  
J. Temple Black ◽  
Jose Guerrero

In the SEM, contrast in the image is the result of variations in the volume secondary electron emission and backscatter emission which reaches the detector and serves to intensity modulate the signal for the CRT's. This emission is a function of the accelerating potential, material density, chemistry, crystallography, local charge effects, surface morphology and especially the angle of the incident electron beam with the particular surface site. Aside from the influence of object inclination, the surface morphology is the most important feature In producing contrast. “Specimen collection“ is the name given the shielding of the collector by adjacent parts of the specimen, producing much image contrast. This type of contrast can occur for both secondary and backscatter electrons even though the secondary electrons take curved paths to the detector-collector.Figure 1 demonstrates, in a unique and striking fashion, the specimen collection effect. The subject material here is Armco Iron, 99.85% purity, which was spark machined.


Author(s):  
D.R. Mattie ◽  
J.W. Fisher

Jet fuels such as JP-4 can be introduced into the environment and come in contact with aquatic biota in several ways. Studies in this laboratory have demonstrated JP-4 toxicity to fish. Benzene is the major constituent of the water soluble fraction of JP-4. The normal surface morphology of bluegill olfactory lamellae was examined in conjunction with electrophysiology experiments. There was no information regarding the ultrastructural and physiological responses of the olfactory epithelium of bluegills to acute benzene exposure.The purpose of this investigation was to determine the effects of benzene on the surface morphology of the nasal rosettes of the bluegill sunfish (Lepomis macrochirus). Bluegills were exposed to a sublethal concentration of 7.7±0.2ppm (+S.E.M.) benzene for five, ten or fourteen days. Nasal rosettes were fixed in 2.5% glutaraldehyde and 2.0% paraformaldehyde in 0.1M cacodylate buffer (pH 7.4) containing 1.25mM calcium chloride. Specimens were processed for scanning electron microscopy.


Author(s):  
N. Osakabe ◽  
J. Endo ◽  
T. Matsuda ◽  
A. Tonomura

Progress in microscopy such as STM and TEM-TED has revealed surface structures in atomic dimension. REM has been used for the observation of surface dynamical process and surface morphology. Recently developed reflection electron holography, which employes REM optics to measure the phase shift of reflected electron, has been proved to be effective for the observation of surface morphology in high vertical resolution ≃ 0.01 Å.The key to the high sensitivity of the method is best shown by comparing the phase shift generation by surface topography with that in transmission mode. Difference in refractive index between vacuum and material Vo/2E≃10-4 owes the phase shift in transmission mode as shownn Fig. 1( a). While geometrical path difference is created in reflection mode( Fig. 1(b) ), which is measured interferometrically using high energy electron beam of wavelength ≃0.01 Å. Together with the phase amplification technique , the vertivcal resolution is expected to be ≤0.01 Å in an ideal case.


Author(s):  
M. Shlepr ◽  
C. M. Vicroy

The microelectronics industry is heavily tasked with minimizing contaminates at all steps of the manufacturing process. Particles are generated by physical and/or chemical fragmentation from a mothersource. The tools and macrovolumes of chemicals used for processing, the environment surrounding the process, and the circuits themselves are all potential particle sources. A first step in eliminating these contaminants is to identify their source. Elemental analysis of the particles often proves useful toward this goal, and energy dispersive spectroscopy (EDS) is a commonly used technique. However, the large variety of source materials and process induced changes in the particles often make it difficult to discern if the particles are from a common source.Ordination is commonly used in ecology to understand community relationships. This technique usespair-wise measures of similarity. Separation of the data set is based on discrimination functions. Theend product is a spatial representation of the data with the distance between points equaling the degree of dissimilarity.


Author(s):  
S. A. Livesey ◽  
A. A. del Campo ◽  
E. S. Griffey ◽  
D. Ohlmer ◽  
T. Schifani ◽  
...  

The aim of this study is to compare methods of sample preparation for elemental analysis. The model system which is used is the human erythrocyte. Energy dispersive spectroscopic analysis has been previously reported for cryofixed and cryosectioned erythrocytes. Such work represents the reference point for this study. The use of plastic embedded samples for elemental analysis has also been documented. The work which is presented here is based on human erythrocytes which have been either chemically fixed and embedded or cryofixed and subsequently processed by a variety of techniques which culminated in plastic embedded samples.Heparinized and washed erythrocytes were prepared by the following methods for this study :(1). Chemical fixation in 4% paraformaldehyde/0.25% glutaraldehyde/0.2 M sucrose in 0.1 M Na cacodylate, pH 7.3 for 30 min, followed by ethanol dehydration, infiltration and embedding in Lowicryl K4M at -20° C.


Sign in / Sign up

Export Citation Format

Share Document