Dielectric constant and loss of polysulphur nitride in the microwave region

1983 ◽  
Vol 2 (12) ◽  
pp. 727-728 ◽  
Author(s):  
T. J. Bhattacharyya ◽  
P. K. Kadaba
Keyword(s):  
Dielectric Constant ◽  
Microwave Region ◽  
Dielectric Constant And Loss

Dielectric Constant and Loss Tangent Characterization of Thin High-K Dielectrics Using Corner-to-Corner Plane Probing

2006 ◽  
Author(s):  
A. Ege Engin ◽  
Abdemanaf Tambawala ◽  
Madhavan Swaminathan ◽  
Swapan Bhattacharya ◽  
Pranabes Pramanik ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Loss Tangent ◽  
Dielectric Constant And Loss ◽  
High K

Broadband Dielectric Characterization of Aluminum Oxide (Al2O3)

2008 ◽  
Vol 5 (1) ◽  
pp. 2-7 ◽  
Author(s):  
Khalid Z. Rajab ◽  
Mira Naftaly ◽  
Edmund H. Linfield ◽  
Juan C. Nino ◽  
Daniel Arenas ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Aluminum Oxide ◽  
Time Domain ◽  
Measurement Techniques ◽  
Thz Spectroscopy ◽  
Dielectric Characterization ◽  
Dielectric Constant And Loss ◽  
Ir Frequencies ◽  
Cofired Ceramics

Applications for low-temperature cofired ceramics (LTCC) and high-temperature cofired ceramics (HTCC) are advancing to higher frequencies. In order to design ceramic microsystems and electronic packages, the electrical properties of materials must be well characterized over a broad frequency range. In this study, the dielectric properties of commercial aluminum oxide (Al2O3) with different glass loadings are characterized using three different measurement techniques: the split-post cavity, terahertz (THz) time-domain spectroscopy, and Fourier transform IR spectroscopy (FTIR). Specifically, the dielectric properties will be characterized from 10 GHz to IR frequencies. A split-post cavity was employed for determination of dielectric properties in the 10 GHz range. A broadband THz spectroscopy technique was used to characterize the specimens using measured time-domain transmission data. The dielectric constant and loss were extracted from the sample's frequency-domain transmission characteristics, providing data between 100 GHz and 2 THz. Additionally, FTIR was used to characterize the samples from ~33 to 3300 cm−1 (~1–100 THz). The measurements from the three techniques are compared, and dielectric constant and loss data will be presented for commercial and experimental ceramic systems from 10 GHz to IR frequencies.

PREDICTION OF SHIELDING EFFECTIVENESS OF CEMENT-GRAPHITE POWDER USING ARTIFICIAL NEURAL NETWORK

2016 ◽  
Vol 78 (6-2) ◽  
Author(s):  
See Khee Yee ◽  
Samsul Haimi Dahlan ◽  
Mohd Zarar Mohd Jenu ◽  
Chee Kiong Sia
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Dielectric Constant ◽  
Loss Tangent ◽  
Analytical Calculation ◽  
Graphite Powder ◽  
Dielectric Measurement ◽  
Shielding Effectiveness ◽  
Dielectric Constant And Loss ◽  
Artificial Neural

This paper presents the method to predict the shielding effectiveness of cement powder mixed with different amount of graphite powder. Cement mixed with different percentage of graphite is prepared. Their dielectric constant and loss tangent are measured based on the transmission/reflection technique using APC7 connector. The measured data is fed into Artificial Neural Network (ANN) for training. When the training process is completed the neural network is used to predict the dielectric constant and loss tangent of cement-graphite mixture that contains different amount of graphite. The comparison shows that the trained neural network is very successful to predict the dielectric constant and loss tangent of cement-graphite mixture. The proposed graphical user interface has made the process of shielding effectiveness prediction becomes more user friendly especially for those designers who are not familiar with the analytical calculation of shielding effectiveness and dielectric measurement.

Sign in / Sign up

Export Citation Format

Share Document