Effect of frictional hardening treatment on the low-cycle corrosion fatigue of steel 65G with rigid loading

1979 ◽  
Vol 14 (5) ◽  
pp. 475-478
Author(s):  
Yu. I. Babei ◽  
I. P. Pistun ◽  
V. A. Duryagin ◽  
M. D. Maksimishin ◽  
V. M. Gurei
Keyword(s):  
Corrosion Fatigue ◽  
Hardening Treatment ◽  
Rigid Loading ◽  
Frictional Hardening

scholarly journals Influence of Deep Rolling and Induction Hardening on Microstructure Evolution of Crankshaft Sections made from 38MnSiVS5 and 42CrMo4

2021 ◽  
Vol 76 (3) ◽  
pp. 175-194
Author(s):  
A. Fischer ◽  
B. Scholtes ◽  
T. Niendorf
Keyword(s):  
Process Parameters ◽  
Microstructure Evolution ◽  
Surface Hardening ◽  
Qualitative Evaluation ◽  
Induction Hardening ◽  
Deep Rolling ◽  
Automotive Components ◽  
Hardening Treatment ◽  
Steel Grades ◽  
Definition Of

Abstract In order to improve properties of complex automotive components, such as crankshafts, in an application-oriented way, several surface hardening treatments can be applied. Concerning the material performance the definition of adequate process parameters influences the resulting surface properties and, thus, the effectiveness of surface hardening treatments. To analyze most relevant process-microstructure-property relationships, the present paper reports results obtained by two different well-established surface hardening procedures, i. e. deep rolling as a mechanical treatment and induction hardening as a thermal treatment. For each hardening process widely used crankshaft steel grades, i. e. a medium carbon 38MnSiVS5 microalloyed steel and a quenched and tempered 42CrMo4 were selected and thoroughly characterized upon processing, using equal parameter settings. The results reveal that deep rolling in contrast to induction hardening proves to be a less sensitive surface layer treatment with regard to small differences in the initial microstructure, the chemical composition and the applied process parameters. Differences in microstructure evolution with respect to the applied surface hardening treatment are studied and discussed for the highly stressed fillet region of automotive crankshaft sections for all conditions. In this context, high-resolution SEM-based techniques such as EBSD and ECCI are proven to be very effective for fast qualitative evaluation of induced microstructural changes.

scholarly journals Corrosion Fatigue Characteristics of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1046
Author(s):  
Balachander Gnanasekaran ◽  
Jie Song ◽  
Vijay Vasudevan ◽  
Yao Fu
Keyword(s):  
Fatigue Crack ◽  
Crack Propagation ◽  
Fatigue Crack Propagation ◽  
Corrosion Fatigue ◽  
Fatigue Properties ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Corrosion Properties ◽  
Powder Bed ◽  
Fatigue Characteristics

Laser powder bed fusion (LPBF) has been increasingly used in the fabrication of dense metallic structures. However, the corrosion related properties of LPBF alloys, in particular environment-assisted cracking, such as corrosion fatigue properties, are not well understood. In this study, the corrosion and corrosion fatigue characteristics of LPBF 316L stainless steels (SS) in 3.5 wt.% NaCl solution have been investigated using an electrochemical method, high cycle fatigue, and fatigue crack propagation testing. The LPBF 316L SSs demonstrated significantly improved corrosion properties compared to conventionally manufactured 316L, as reflected by the increased pitting and repassivation potentials, as well as retarded crack initiation. However, the printing parameters did not strongly affect the pitting potentials. LPBF samples also demonstrated enhanced capabilities of repassivation during the fatigue crack propagation. The unique microstructural features introduced during the printing process are discussed. The improved corrosion and corrosion fatigue properties are attributed to the presence of columnar/cellular subgrains formed by dislocation networks that serve as high diffusion paths to transport anti-corrosion elements.

Sign in / Sign up

Export Citation Format

Share Document