Influence of cold plastic deformation of austenitic grain size in steel

1992 ◽  
Vol 34 (3) ◽  
pp. 153-157
Author(s):  
S. S. D'yachenko ◽  
E. A. Kuz'menko
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
Cold Plastic Deformation ◽  
Austenitic Grain Size

scholarly journals Strain Hardening of Low-Carbon Steel in the Area of Jerky Flow

2021 ◽  
pp. 65-75
Author(s):  
І. О Vakulenko ◽  
D. M Bolotova ◽  
S. V Proidak ◽  
B Kurt ◽  
A. E Erdogdu ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
Carbon Steel ◽  
Strain Hardening ◽  
Low Carbon Steel ◽  
Carbon Steels ◽  
Cold Plastic Deformation ◽  
Low Carbon ◽  
Jerky Flow ◽  
Ferrite Grain Size

Purpose. The aim of this work is to assess the effect of ferrite grain size of low-carbon steel on the development of strain hardening processes in the area of nucleation and propagation of deformation bands. Methodology. Low-carbon steels with a carbon content of 0.06–0.1% C in various structural states were used as the material for study. The sample for the study was a wire with a diameter of 1mm. The structural studies of the metal were carried out using an Epiquant light microscope. Ferrite grain size was determined using quantitative metallographic techniques. Different ferrite grain size was obtained as a result of combination of thermal and termo mechanical treatment. Vary by heating temperature and the cooling rate, using cold plastic deformation and subsequent annealing, made it possible to change the ferrite grain size at the level of two orders of magnitude. Deformation curves were obtained during stretching the samples on the Instron testing machine. Findings. Based on the analysis of stretching curves of low-carbon steels with different ferrite grain sizes, it has been established that the initiation and propagation of plastic deformation in the jerky flow area is accompanied by the development of strain hardening processes. The study of the nature of increase at dislocation density depending on ferrite grain size of low-carbon steel, starting from the moment of initiation of plastic deformation, confirmed the existence of relationship between the development of strain hardening at the area of jerky flow and the area of parabolic hardening curve. Originality. One of the reasons for decrease in Luders deformation with an increase of ferrite grain size of low-carbon steel is an increase in strain hardening indicator, which accelerates decomposition of uniform dislocations distribution in the front of deformation band. The flow stress during initiation of plastic deformation is determined by the additive contribution from the frictional stress of the crystal lattices, the state of ferrite grain boundaries, and the density of mobile dislocations. It was found that the size of dislocation cell increases in proportion to the diameter of ferrite grain, which facilitates the development of dislocation annihilation during plastic deformation. Practical value. Explanation of qualitative dependence of the influence of ferrite grain size of a low-carbon steel on the strain hardening degree and the magnitude of Luders deformation will make it possible to determine the optimal structural state of steels subjected to cold plastic deformation.

From Micro to Nano Scale Structure by Plastic Deformations

2014 ◽  
Vol 783-786 ◽  
pp. 842-847 ◽  
Author(s):  
Tibor Kvačkaj ◽  
Jana Bidulská
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Plastic Deformation ◽  
Grain Size ◽  
Severe Plastic Deformation ◽  
Structure Refinement ◽  
Austenite Formation ◽  
Structural Refinement ◽  
Plastic Deformations ◽  
Austenitic Grain Size

Nowadays, the strategy for improving of mechanical properties in metals is not oriented to alloying followed by heat treatment. An effective way how to improve the mechanical properties of metals is focused on the research looking for some additional structural abilities of steels. Structural refinement is one of the ways. Refinement of the austenitic grain size (AGS) carried out through plastic deformation in a spontaneous recrystallization region of austenite, formation of AGS by plastic deformations in a non-recrystallized region of austenite will be considered as potential ways for AGS refinement. After classic methods of plastic deformations, next structure refinement can be obtained by an application of severe plastic deformation (SPD) methods.

scholarly journals Structural Transformations and Mechanical Properties of Metastable Austenitic Steel under High Temperature Thermomechanical Treatment

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 645
Author(s):  
Igor Litovchenko ◽  
Sergey Akkuzin ◽  
Nadezhda Polekhina ◽  
Kseniya Almaeva ◽  
Evgeny Moskvichev
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
High Temperature ◽  
Austenitic Steel ◽  
Structural Transformations ◽  
Initial State ◽  
Twin Boundaries ◽  
Metastable Austenitic Steel ◽  
Average Grain Size ◽  
Heating Up

The effect of high-temperature thermomechanical treatment on the structural transformations and mechanical properties of metastable austenitic steel of the AISI 321 type is investigated. The features of the grain and defect microstructure of steel were studied by scanning electron microscopy with electron back-scatter diffraction (SEM EBSD) and transmission electron microscopy (TEM). It is shown that in the initial state after solution treatment the average grain size is 18 μm. A high (≈50%) fraction of twin boundaries (annealing twins) was found. In the course of hot (with heating up to 1100 °C) plastic deformation by rolling to moderate strain (e = 1.6, where e is true strain) the grain structure undergoes fragmentation, which gives rise to grain refining (the average grain size is 8 μm). Partial recovery and recrystallization also occur. The fraction of low-angle misorientation boundaries increases up to ≈46%, and that of twin boundaries decreases to ≈25%, compared to the initial state. The yield strength after this treatment reaches up to 477 MPa with elongation-to-failure of 26%. The combination of plastic deformation with heating up to 1100 °C (e = 0.8) and subsequent deformation with heating up to 600 °C (e = 0.7) reduces the average grain size to 1.4 μm and forms submicrocrystalline fragments. The fraction of low-angle misorientation boundaries is ≈60%, and that of twin boundaries is ≈3%. The structural states formed after this treatment provide an increase in the strength properties of steel (yield strength reaches up to 677 MPa) with ductility values of 12%. The mechanisms of plastic deformation and strengthening of metastable austenitic steel under the above high-temperature thermomechanical treatments are discussed.

scholarly journals Finite element modelling of microstructural changes during equal channel angular drawing of pure aluminium

2021 ◽  
Author(s):  
Serafino Caruso ◽  
Stano Imbrogno
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
Finite Element ◽  
Size Variation ◽  
Fe Model ◽  
Pure Aluminium ◽  
Continuous Dynamic Recrystallization ◽  
Research Activities ◽  
Hardness Change ◽  
Continuous Dynamic

AbstractGrain refinement by severe plastic deformation (SPD) techniques, as a mechanism to control microstructure (recrystallization, grain size changes,…) and mechanical properties (yield strength, ultimate tensile strength, strain, hardness variation…) of pure aluminium conductor wires, is a topic of great interest for both academic and industrial research activities. This paper presents an innovative finite element (FE) model able to describe the microstructural evolution and the continuous dynamic recrystallization (CDRX) that occur during equal channel angular drawing (ECAD) of commercial 1370 pure aluminium (99.7% Al). A user subroutine has been developed based on the continuum mechanical model and the Hall-Petch (H-P) equations to predict grain size variation and hardness change. The model is validated by comparison with the experimental results and a predictive analysis is conducted varying the channel die angles. The study provides an accurate prediction of both the thermo-mechanical and the microstructural phenomena that occur during the process characterized by large plastic deformation.

Effect of preliminary cold plastic deformation on carbon diffusion in austenite

1971 ◽  
Vol 13 (12) ◽  
pp. 1021-1023 ◽  
Author(s):  
I. N. Kidin ◽  
G. V. Shcherbedinskii ◽  
V. I. Andryushechkin ◽  
V. A. Volkov
Keyword(s):  
Plastic Deformation ◽  
Carbon Diffusion ◽  
Cold Plastic Deformation

Computation on continuous grain refinement in AA1050 aluminum during repetitive tube expansion and shrinking technique

2015 ◽  
Vol 232 (4) ◽  
pp. 307-318
Author(s):  
H Jafarzadeh ◽  
K Abrinia
Keyword(s):  
Finite Element Method ◽  
Plastic Deformation ◽  
Grain Size ◽  
Finite Element ◽  
Dislocation Density ◽  
Severe Plastic Deformation ◽  
Grain Refinement ◽  
Half Cycle ◽  
Tube Expansion ◽  
Element Method

The microstructure evolution during recently developed severe plastic deformation method named repetitive tube expansion and shrinking of commercially pure AA1050 aluminum tubes has been studied in this paper. The behavior of the material under repetitive tube expansion and shrinking including grain size and dislocation density was simulated using the finite element method. The continuous dynamic recrystallization of AA1050 during severe plastic deformation was considered as the main grain refinement mechanism in micromechanical constitutive model. Also, the flow stress of material in macroscopic scale is related to microstructure quantities. This is in contrast to the previous approaches in finite element method simulations of severe plastic deformation methods where the microstructure parameters such as grain size were not considered at all. The grain size and dislocation density data were obtained during the simulation of the first and second half-cycles of repetitive tube expansion and shrinking, and good agreement with experimental data was observed. The finite element method simulated grain refinement behavior is consistent with the experimentally obtained results, where the rapid decrease of the grain size occurred during the first half-cycle and slowed down from the second half-cycle onwards. Calculations indicated a uniform distribution of grain size and dislocation density along the tube length but a non-uniform distribution along the tube thickness. The distribution characteristics of grain size, dislocation density, hardness, and effective plastic strain were consistent with each other.

Simulation of Grain Growth of Materials Produced by Severe Plastic Deformation

2011 ◽  
Vol 409 ◽  
pp. 597-602
Author(s):  
Yuichi Mizuno ◽  
Kenji Okushiro ◽  
Yoshiyuki Saito
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
Dislocation Density ◽  
Severe Plastic Deformation ◽  
Size Distribution ◽  
Grain Size Distribution ◽  
Boundary Migration ◽  
Interface Energy ◽  
Diffusion Reaction ◽  
Field Methods

Grain boundary migration in materials under severe plastic deformation was simulated by the phase field methods. The interface energy and dislocation density on growth kinetics were simulated on systems of 2-dimensional lattice. .In inhomogeneous systems grain size distributions in simulated grain structures were binodal distributions. The classification of the solution of differential equations based on the mean-field Hillert model describing temporal evolution of the scaled grain size distribution function was in good agreement with those given by the Computer simulations. Effect of dislocation on thermodynamic stability was taken into consideration. Dislocation density distribution was calculated by a equation based on the diffusion-reaction equation.. Scaled grain size distribution was known to be affected by the dislocation.

scholarly journals A Dislocation-Based Theory for the Deformation Hardening Behavior of DP Steels: Impact of Martensite Content and Ferrite Grain Size

2010 ◽  
Vol 2010 ◽  
pp. 1-16 ◽  
Author(s):  
Yngve Bergström ◽  
Ylva Granbom ◽  
Dirk Sterkenburg
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
Deformation Process ◽  
Volume Fraction ◽  
High Energy ◽  
Martensite Content ◽  
Plastic Deformation Process ◽  
Deformation Hardening ◽  
Dp Steels ◽  
Ferrite Grain Size

A dislocation model, accurately describing the uniaxial plastic stress-strain behavior of dual phase (DP) steels, is proposed and the impact of martensite content and ferrite grain size in four commercially produced DP steels is analyzed. It is assumed that the plastic deformation process is localized to the ferrite. This is taken into account by introducing a nonhomogeneity parameter, f(ε), that specifies the volume fraction of ferrite taking active part in the plastic deformation process. It is found that the larger the martensite content the smaller the initial volume fraction of active ferrite which yields a higher initial deformation hardening rate. This explains the high energy absorbing capacity of DP steels with high volume fractions of martensite. Further, the effect of ferrite grain size strengthening in DP steels is important. The flow stress grain size sensitivity for DP steels is observed to be 7 times larger than that for single phase ferrite.

Sign in / Sign up

Export Citation Format

Share Document