Refining stainless austenitic steels ? A method of improving their local-corrosion resistance

1981 ◽  
Vol 23 (5) ◽  
pp. 297-304
Author(s):  
Ya. M. Kolotyrkin ◽  
E. A. Ul'yanin
Keyword(s):  
Corrosion Resistance ◽  
Austenitic Steels ◽  
Local Corrosion

Effect of N, Mo, and Si on Local Corrosion Resistance of Unstabilized Cr–Ni and Cr–Mn–Ni Austenitic Steels

Metallurgist ◽  
2016 ◽  
Vol 60 (7-8) ◽  
pp. 822-831 ◽  
Author(s):  
L. A. Pisarevskii ◽  
G. A. Filippov ◽  
A. A. Lipatov
Keyword(s):  
Corrosion Resistance ◽  
Austenitic Steels ◽  
Local Corrosion

Microstructures of Ti-1.5 w/o Ni Alloys with Mo and A1 Additions

1975 ◽  
Vol 33 ◽  
pp. 54-55
Author(s):  
Anna C. Fraker
Keyword(s):  
Corrosion Resistance ◽  
Beneficial Effect ◽  
Crevice Corrosion ◽  
Local Corrosion ◽  
Precipitate Size ◽  
Ni Alloys

Small amounts of nickel are added to titanium to improve the crevice corrosion resistance but this results in an alloy which has sheet fabrication difficulties and is subject to the formation of large Ti2Ni precipitates. These large precipitates can serve as local corrosion sites; but in a smaller more widely dispersed form, they can have a beneficial effect on crevice corrosion resistance. The purpose of the present work is to show that the addition of a small amount of Mo to the Ti-1.5Ni alloy reduces the Ti2Ni precipitate size and produces a more elongated grained microstructure. It has recently been reported that small additions of Mo to Ti-0.8 to lw/o Ni alloys produce good crevice corrosion resistance and improved fabrication properties.

NIROSTA 4305

Alloy Digest ◽  
2002 ◽  
Vol 51 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tungsten Carbide ◽  
Tensile Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Austenitic Steels ◽  
High Sulfur Content ◽  
Machined Parts

Abstract NIROSTA 4305 is an austenitic alloy with a high sulfur content. The alloy is typically used for machined parts. As with other austenitic steels, it is necessary to machine with good-quality high-speed steel or tungsten carbide tools. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-854. Producer or source: ThyssenKrupp Nirosta GmbH.

ALLEGHENY LUDLUM TYPE 205

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Cold Working ◽  
High Strength ◽  
Heat Treating ◽  
Austenitic Steels

Abstract Allegheny Stainless Type 205 is a chromium-manganese nitrogen austenitic high strength stainless steel that maintains its low magnetic permeability even after large amounts of cold working. Annealed Type 205 has higher mechanical properties than any of the conventional austenitic steels-and for any given strength level, the ductility of Type 205 is comparable to that of Type 301. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-640. Producer or source: Allegheny Ludlum Corporation. Originally published March 1996, revised October 1997.

Study on Corrosion Resistance of Cr-Containing P110 Steel

2013 ◽  
Vol 740 ◽  
pp. 608-611 ◽  
Author(s):  
Ming Hua Liang ◽  
Zhi Yong Pan ◽  
Xiang Zhang
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Product ◽  
Corrosion Behavior ◽  
Local Corrosion ◽  
Effect Of Temperature ◽  
Corrosion Rates ◽  
P110 Steel ◽  
Better Than

The influence of Cr on corrosion behavior of P110 steel was studied in the simulated CO2 environment. The result demonstrated that the Cr cant change the effect of temperature on P110 steel. The corrosion rates of the two kinds of materials reached the peak at 90°C. The temperature has dual effects on corrosion, which caused the adhesive and productivity of corrosion product formed up 90°C are better than that formed below 90°C; The adding of Cr in the P110 steel can prohibit the local corrosion to occur.

scholarly journals Corrosion Resistance and Pitting Behaviour of Low-Carbon High-Mn Steels in Chloride Solution

2016 ◽  
Vol 61 (2) ◽  
pp. 825-832
Author(s):  
A. Grajcar ◽  
B. Grzegorczyk ◽  
A. Kozłowska
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Behaviour ◽  
Cold Deformation ◽  
Metallic Matrix ◽  
Corrosion Damage ◽  
Austenitic Steels ◽  
Low Carbon ◽  
Deformation Bands ◽  
Cold Worked ◽  
Corrosion Pits

Abstract Corrosion resistance of the X4MnSiAlNbTi27-4-2 and X6MnSiAlNbTi26-3-3 type austenitic steels, after hot deformation as well as after cold rolling, were evaluated in 3.5% NaCl solution using potentiodynamic polarization tests. A type of nonmetallic inclusions and their pitting corrosion behaviour were investigated. Additionally, the effect of cold deformation on the corrosion resistance of high-Mn steels was studied. The SEM micrographs revealed that corrosion damage formed in both investigated steels is characterized by various shapes and an irregular distribution at the metallic matrix, independently on the steel state (thermomechanically treated or cold worked). Corrosion pits are generated both in grain interiors, grain boundaries and along the deformation bands. Moreover, corrosion damage is stronger in cold deformed steels in comparison to the thermomechanically treated specimens. EDS analysis revealed that corrosion pits preferentially nucleated on MnS and AlN inclusions or complex oxysulphides. The morphology of corrosion damage in 3.5% NaCl supports the data registered in potentiodynamic tests.

Sigma phase precipitation on welded SAF 2205 Duplex Stainless Steels after isothermal heat treatment

2014 ◽  
Vol 1611 ◽  
pp. 177-182
Author(s):  
A. F. Miranda Pérez ◽  
R. Sandström ◽  
I. Calliari ◽  
F. A. Reyes Valdés
Keyword(s):  
Corrosion Resistance ◽  
Stainless Steels ◽  
Duplex Stainless Steels ◽  
Austenitic Steels ◽  
Isothermal Treatment ◽  
Ferromagnetic Behavior ◽  
Isothermal Heat Treatment ◽  
Σ Phase ◽  
Δ Ferrite ◽  
Saf 2205

ABSTRACTDuplex stainless steels are commonly used for various applications owing to their superior corrosion resistance and/or strength. They have ferromagnetic behavior together with a good thermal conductivity and a lower thermal expansion as a result of higher ferrite content than austenitic steels. Their ferrite matrix suffers a decomposition process during aging in the temperature range 650-950° C producing precipitation of austenite, σ and χ, carbides and nitrides. These intermetallic phases are known to be deleterious for corrosion resistance and mechanical properties.In this work the effect of aging time during isothermal treatment at 850°C and 900°C on the microstructure of SAF 2205 Duplex Stainless Steels welded plates has been investigated. The aim of this work is to determine the morphology of σ phase, and perform a quantitative analysis of the precipitation process.Submerged Arc Welding is used for processing. It produces a high content of δ ferrite in the heat affected zone and low content of austenite in the weld. Microstructural examination shows that the σ phase precipitates at δ ferrite/γ interphases. Longer aging treatments give rise to an increase of volume fraction together with a coarser morphology.

scholarly journals CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance

2021 ◽  
Vol 3 (11) ◽  
Author(s):  
L. Chmielak ◽  
L. Mujica Roncery ◽  
P. Niederhofer ◽  
S. Weber ◽  
W. Theisen
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Austenitic Steels ◽  
High Entropy Alloys ◽  
Interstitial Free ◽  
High Entropy ◽  
Carbon And Nitrogen ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance ◽  
The Impact

AbstractThe use of interstitial elements has been a key factor for the development of different kinds of steels. However, this aspect has been little explored in the field of high entropy alloys (HEAs). In this investigation, the effect of carbon and nitrogen in a near-equiatomic CrMnFeCoNi HEA is studied, analyzing their impact on the microstructure, and mechanical properties from 77K to 673K, as well as wear, and corrosion resistance. Carbon and nitrogen are part of the FCC solid solution and contribute to the formation of precipitates. An increase in the yield and ultimate tensile strength accompanied with a decrease in the ductility are the main effects of C and N. The impact toughness of the interstitial-free material is higher than that of C and C+N alloyed systems. Compared to CrNi and CrMn austenitic steels, the wear resistance of the alloys at room temperature is rather low. The surface corrosion resistance of HEAs is comparable to austenitic steels; nevertheless HEAs are more susceptible to pitting in chloride containing solutions.

Sign in / Sign up

Export Citation Format

Share Document