Features of structure formation in alloy ZhS6U after temperature and time treatment of the melt

1990 ◽  
Vol 32 (11) ◽  
pp. 884-887 ◽  
Author(s):  
E. A. Kuleshova ◽  
�. V. Kolotukhin ◽  
E. E. Baryshev ◽  
V. N. Larionova ◽  
G. M. Rusakov
Keyword(s):  
Structure Formation ◽  
Time Treatment ◽  
Alloy Zhs6u

Sequential Treatment of Deep Leg Vein Thrombosis with Porcine Plasmin and Low Dose Streptokinase

1982 ◽  
Vol 48 (02) ◽  
pp. 190-195 ◽  
Author(s):  
G A Marbet ◽  
R Eichlisberger ◽  
F Duckert ◽  
M A de Silva ◽  
L Biland ◽  
...  
Keyword(s):  
Low Dose ◽  
Significant Negative Correlation ◽  
Sequential Treatment ◽  
Factor V ◽  
Complete Dissolution ◽  
Vein Thrombosis ◽  
Time Treatment ◽  
Lysis Time ◽  
Euglobulin Lysis Time ◽  
Thrombolytic Effect

SummarySequential treatment of deep leg vein thrombosis with porcine plasmin and low dose streptokinase (10,000-20,000 U/h) produces strong systemic fibrinolysis as demonstrated by the sustained decrease of euglobulin lysis time, of thromboplastin time values in percent, fibrinogen and factor V levels. There is a statistically significant negative correlation between thrombolytic results and euglobulin lysis time. Treatment periods below 3 days are unlikely to give satisfactory results. Occluded vein segments with an apparent median age of 4 days including thrombi older than 10 days (20% of cases) are cleared with an average chance of 50%. Complete dissolution of all thrombi proximal to the crural veins has been demonstrated in 47/114 = 41.2%, some thrombolytic effect in 31/114 = 27.2% and treatment failure in 36/114 = 31.6%. The data favour laboratory monitoring of thrombolytic therapy.

Social development of modern Russia: trends, risks, prospects

2018 ◽  
pp. 76-89
Author(s):  
E. M. Avraamova ◽  
V. N. Titov
Keyword(s):  
Middle Class ◽  
Social Development ◽  
Social Structure ◽  
Structure Formation ◽  
Resource Availability ◽  
Social Dynamics ◽  
Quantitative Estimation ◽  
Resource Potential ◽  
Institutional Conditions ◽  
Resource Characteristics

The analysis of present-time directions in the study of social development has allowed to identify the resource approach as the most productive one which enables to assess social dynamics through the range of resource characteristics of different population groups and abilities of the relevant groups to apply development resources in the current economic and institutional conditions. Basing on the sociological survey conducted by ISAP RANEPA, the quantitative estimation of material and social recourses of the population has been made; integral values of the resource potential have been calculated as well. The issues of social structure formation are analyzed through the aspect of resource availability; the barriers of Russian middle-class enlargement are defined.

Characteristics Of The Structure Formation Of Gypsum Binder Modified With Zinc Hydrosilicates

2020 ◽  
pp. 40-46
Keyword(s):  
Synergistic Effect ◽  
Physicochemical Properties ◽  
Structure Formation ◽  
Silicic Acid ◽  
Chemical Properties ◽  
Crystal Formation ◽  
Ability To Act ◽  
Chemical Factors ◽  
Sorption Characteristics

The authors' methodic for assessing the role of chemical and physic-chemical factors during the structure formation of gypsum stone is presented in the article. The methodic is also makes it possible to reveal the synergistic effect and to determine the ranges of variation of controls factors that ensure maximum values of such effect. The effect of a micro-sized modifier based on zinc hydro-silicates on the structure formation of building gypsum is analyzed and corresponding dependencies are found. It is shown that effects of influence of modifier on the properties of gypsum compositions are determined by chemical properties of modifier. Among the mentioned properties are sorption characteristics (which depend on the amount of silicic acid and its state) and physicochemical properties - the ability to act as a substrate during crystal formation. The proposed method can also be extended to other binding substances and materials. This article contributes to the understanding of the processes that occur during the structure formation of composites, which will make it possible to control the structure formation in the future, obtaining materials with a given set of properties.

Study Of Structure Formation Of Organic-Mineral Compositions With Fibrous Filler By Electron Microscopy Method

2019 ◽  
pp. 41-47
Keyword(s):  
Electron Microscopy ◽  
Structure Formation ◽  
Mineral Composition ◽  
Bending Strength ◽  
Cement Stone ◽  
Hydrated Cement ◽  
Fibrous Filler ◽  
Organic Mineral ◽  
Microscopy Method ◽  
Mineral Compositions

The article presents the study of processes of structure formation of cement stone and products of hardening of organic-mineral compositions with fibrous filler (shavings) by the electronic scanning microscopy method. It is established that the additive-free cement stone at the age of 28 days has a dense and homogeneous structure, consists of calcium hydro-silicates, Portlandite and calcite - newgrowths characteristic for cement systems. Cellulose fibers, which make up the bulk of the substance of shavings, are sufficiently active, which determines the high adhesion of the hydration products of the cement binder to their surface. It is shown that the introduction of shavings into the organo-mineral composition leads to inhibition of cement hydration processes. Organo-mineral compositions with different shavings content (two compositions) were analyzed. The first composition is characterized by a fairly dense structure, the cement stone consists of globular nanoscale nuclei of hydrosilicates, Portlandite and calcite. The second composition has a loose porous structure, cement stone consists of non-hydrated cement grains, newgrowths are represented by calcite and vaterite. The structure of the contact zone "osprey fiber-cement stone" in the organo-mineral composition of the first composition indicates a good adhesion of the filler surface with the phases of hydrated cement. The use of shavings as a fibrous filler (the first composition) increases the tensile and bending strength, as well as the wear resistance of organo-mineral compositions. The data obtained by scanning electron microscopy are confirmed by the results of studying the processes of structure formation of cement stone by quantitative x-ray phase analysis.

Coagulation-condensation structure formation in aqueous suspensions of mixtures of sulfur and gypsum

2013 ◽  
Vol 0 (1) ◽  
pp. 122
Author(s):  
K. Toshtay ◽  
Kuanyshbek Mussabekov ◽  
S. Kumargaliyeva ◽  
С. Turganbay ◽  
Inal Bakhytkyzy
Keyword(s):  
Structure Formation ◽  
Aqueous Suspensions ◽  
Condensation Structure

STRUCTURE FORMATION IN ACOUSTIC CAVITATION

2005 ◽  
Vol 17 (4) ◽  
pp. 343-371 ◽  
Author(s):  
S. Konovalova ◽  
I. S. Akhatov
Keyword(s):  
Structure Formation ◽  
Acoustic Cavitation

Mechanism of structure formation in fluid-bearing minerals

2019 ◽  
Vol 2 ◽  
pp. 78-84
Author(s):  
Metaksa G.P. ◽  
◽  
Moldabayeva G.Zh. ◽  
Alisheva Zh.N. ◽  
◽  
...  
Keyword(s):  
Structure Formation ◽  
Fluid Bearing
Sign in / Sign up

Export Citation Format

Share Document