Intensification of the glass-melting process in flat-glass production

1979 ◽  
Vol 36 (7) ◽  
pp. 356-357
Author(s):  
I. N. Gorina ◽  
A. N. Oleinikova ◽  
V. I. Romanov ◽  
V. V. Fokin
Keyword(s):  
Glass Melting ◽  
Flat Glass ◽  
Glass Production ◽  
Melting Process

Study of Melting Ability of Granulated Glass Batch

2016 ◽  
Vol 690 ◽  
pp. 272-275
Author(s):  
Kanit Tapasa ◽  
Ekarat Meechoowas ◽  
Suwannee Thepbutdee ◽  
Amorntep Montreeuppathumb
Keyword(s):  
Glass Furnace ◽  
Waste Heat ◽  
Raw Materials ◽  
Glass Batch ◽  
Glass Melting ◽  
Glass Production ◽  
Melting Process ◽  
Soda Lime ◽  
Soda Lime Glass ◽  
Preheating Temperature

In the conventional soda-lime glass production, loose raw materials are normally mixed into a glass batch for melting. Dusting and segregation of the loose glass batch are always occurred during the melting process inside the glass furnace. Also, the loose glass batch has low thermal conductivity which limits the glass melting ability and pulling rate of the glass furnace. Granulation and preheating of glass raw materials have been proposed to solve the problems. In this study, the granulated soda-lime glass batch (SiO2 50% Na2CO3 22.5% CaCO3 12% NaAlSi3O8 9.5% BaCO3 2.5% ZnO 1.75% Sb2O3 1% and K2CO3 0.75% by weight) was prepared to study the melting ability in an electric furnace. The granulated batch was also preheated at 500-600°C before melting. The preheating temperature was matched to the temperature of flue gas at the bottom of the stack in the glass furnace. The purpose behind this was aiming to recover the waste heat from the furnace. The experiment exhibited the increased melting ability for the granulated-preheated glass batch

scholarly journals MATHEMATIC SIMULATION OF GLASS MELTING PROCESS IN GLASS PRODUCTION

2020 ◽  
Vol 2021 (1) ◽  
pp. 70-74
Author(s):  
Shuhrat Gulyamov ◽  
◽  
Azamat Rajabov ◽  
Utkir Kholmanov
Keyword(s):  
Automatic Control ◽  
Mathematical Description ◽  
Initial Conditions ◽  
Glass Melting ◽  
Glass Production ◽  
Melting Process ◽  
Turbulent Energy ◽  
Furnace Operation ◽  
Heat Fluxes ◽  
Systematic Analysis

A systematic analysis of the technological process of glass melting as an object of automatic control and management has been carried out. As an object of automatic control with distributed parameters, the mathematical description of the glassmaking furnace operation has been developed (considering the main phenomenological features of the technological mode of glassmaking).In this paper, a mathematical description of charge melting process, additional heating by electric current, bubbling, thermal conductivity and heat fluxes during the processing of molten glass have been generated. Initial conditions and simplifying assumptions have been derived. The model is based on the equations of continuity, momentum and energy, as well as kinetic turbulent energy, dissipation of kinetic turbulent energy. An experiment has been conducted on the proposed in order to check for its adequacy to real glass-making processes.

scholarly journals Study on the erosion of Mo/ZrO2 alloys in glass melting process

2020 ◽  
Vol 39 (1) ◽  
pp. 595-598
Author(s):  
Cui Chaopeng ◽  
Zhu Xiangwei ◽  
Li Qiang ◽  
Zhang Min ◽  
Zhu Guangping
Keyword(s):  
Grain Size ◽  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Hydrothermal Synthesis ◽  
Grain Boundaries ◽  
Electrode Material ◽  
Glass Melting ◽  
Melting Process ◽  
Fine Grain ◽  
Conventional Electrode

AbstractThe Mo/ZrO2 electrode was prepared by combining hydrothermal synthesis with powder metallurgy, and this new electrode material has a totally different microstructure from the conventional electrode. The grain size of the new electrode was fine, and the size of ZrO2 in the alloy reached 200 nm. According to the results, the Mo–ZrO2 electrode has better performance, because the erosion occurs along the grain boundaries. Meanwhile, the new electrode, based on its fine grain, can effectively improve the corrosion resistance of the electrode.

Improving flat glass production using the nondebiteuse method

1972 ◽  
Vol 29 (12) ◽  
pp. 782-785
Author(s):  
K. T. Bondarev ◽  
F. G. Solinov ◽  
O. A. Golozubov
Keyword(s):  
Flat Glass ◽  
Glass Production

Water Footprint Evaluation of the Production of Float Flat Glass

2021 ◽  
Vol 1035 ◽  
pp. 1102-1108
Author(s):  
Yi Ling Wu ◽  
Xian Zheng Gong ◽  
Yu Liu ◽  
Xiao Qing Li ◽  
Xiao Fei Tian ◽  
...  
Keyword(s):  
Water Consumption ◽  
Evaluation Method ◽  
Water Footprint ◽  
Flat Glass ◽  
Glass Production ◽  
Water Shortage ◽  
Raw Material ◽  
Plate Glass ◽  
Water Degradation ◽  
Production Stage

The ISO14046 water footprint evaluation method was used in this study to calculate the water shortage footprint and water degradation footprint in plate glass production, in order to improve the water efficiency and management level in the production process of plate glass in China. A certain enterprise in Hebei province was selected for investigation in 2018. The results show that the water shortage footprint generated by the production of flat glass was 0.435 m3H2Oeq/weight box. The proportion at raw material production stage was the largest, being 86%, so the water consumption control in raw material mining and the circulating water system should be strengthened and improved to reduce the fresh water consumption. Water degradation footprint in flat glass industry mainly consisted of eutrophication and acidification footprints. The eutrophication footprint was calculated as 0.027 kgNO3-eq/weight box, and water acidification footprint was 0.271 kgSO2eq/weight box. The largest proportion occurred at flat glass production stage. It should be paid attention at this stage, to update the relatively clean production equipments and add the waste gas processing steps to reduce pollution discharge.

Effectiveness of stirring the glass during flat-glass production

1983 ◽  
Vol 40 (1) ◽  
pp. 10-14
Author(s):  
V. P. Bespalov ◽  
V. N. Korotkova ◽  
V. A. Rozhkov ◽  
K. D. Safre ◽  
V. D. Tokarev ◽  
...  
Keyword(s):  
Flat Glass ◽  
Glass Production
Sign in / Sign up

Export Citation Format

Share Document