Workers of the construction industry! The highest possible efficiency of capital construction! we must start new projects at the right time, improve quality, and lower the cost of constructional work!

1975 ◽  
Vol 32 (8) ◽  
pp. 507-508
2018 ◽  
Vol 4 (2) ◽  
pp. 43-55
Author(s):  
Ika Yulianti ◽  
Endah Masrunik ◽  
Anam Miftakhul Huda ◽  
Diana Elvianita

This study aims to find a comparison of the calculation of the cost of goods manufactured in the CV. Mitra Setia Blitar uses the company's method and uses the Job Order Costing (JOC) method. The method used in this study is quantitative. The types of data used are quantitative and qualitative. Quantitative data is in the form of map production cost data while qualitative data is in the form of information about map production process. The result of calculating the cost of production of the map between the two methods results in a difference of Rp. 306. Calculation using the company method is more expensive than using the Job Order Costing method. Calculation of cost of goods manufactured using the company method is Rp. 2,205,000, - or Rp. 2,205, - each unit. While using the Job Order Costing (JOC) method is Rp. 1,899,000, - or Rp 1,899, - each unit. So that the right method used in calculating the cost of production is the Job Order Costing (JOC) method


Author(s):  
V.V. Verna

The article provides a rationale for methodological approaches to assessing the effectiveness of outsourcing in organizations of the construction industry using the example of outsourcing schemes to perform personnel functions. The conditional example shows the impact of the use of outsourcing on reducing the costs of a construction organization. The main prerequisites for the use of outsourcing in the activities of enterprises in the construction industry are identified, methodological approaches to assessing the cost-effectiveness of personnel outsourcing in the construction industry enterprises are substantiated.


2015 ◽  
Vol 43 (1) ◽  
pp. 147-176
Author(s):  
Andrew J Serpell

Payday loans are small-amount, short-term, unsecured, high-cost credit contracts provided by non-mainstream credit providers. Payday loans are usually taken out to help the consumer pay for essential items, such as food, rent, electricity, petrol, broken-down appliances or car registration or repairs. These consumers take out payday loans because they cannot — or believe that they cannot — obtain a loan from a mainstream credit provider such as a bank. In recent years there has been a protracted debate in Australia — and in several overseas jurisdictions — about how to regulate the industry. Recent amendments to the National Consumer Credit Protection Act 2009 (Cth) — referred to in this article as the 2013 reforms — are designed to better protect payday loan consumers. While the 2013 reforms provide substantially improved protection for payday loan consumers, further changes to the law may be warranted. This article raises several law reform issues which should be considered as part of the 2015 review into small amount credit contracts, including whether the caps on the cost of credit are set at the right level, whether the required content and presentation of the consumer warnings needs to be altered, whether more needs to be done to protect consumers who are particularly disadvantaged or vulnerable and whether a general anti-avoidance provision should be included in the credit legislation.


2020 ◽  
Vol 67 (1) ◽  
pp. 28-34
Author(s):  
Aleksandr V. Vinogradov ◽  
Aleksey V. Bukreev

When repairing and replacing electrical wiring in enterprises, the main difficulty is the lack or poor quality of documentation, plans for conductors laying. Distinguishing wires (cables) and their cores by the color of the shells or using tags attached to the ends is difficult if the shells have the same color and there are no tags. Devices and technical solutions used to identify wires and cables do not allow recognizing conductors without breaking the electrical circuit, removing insulation, and de-energizing the network. Searching for the right conductor is a time-consuming operation. (Research purpose) The research purpose is developing a new microcontroller device for identifying wires using an acoustic signal. (Materials and methods) Literature sources has been searched for devices for conductors identifying. (Results and discussion) The article proposes a method that involves feeding an acoustic signal to a wire at one point and capturing it at another, in order to recognize the desired wire. The article presents results of comparison of the developed microcontroller device for identifying conductors using an acoustic signal with known devices and methods for conductors recognizing. (Conclusions) The article reveals the shortcomings of existing methods and means of identifying wires and cables. Authors performed a theoretical calculation of the sound pressure in the conductor at a given distance. The article presents the calculation of speed of acoustic waves in conductors with different types of insulation. Authors designed a microcontroller device for identifying conductors using an acoustic signal and tested it. It was determined that the device increases the safety of work, reduces the cost of operating internal wiring and identification time; eliminates the violation of wire insulation, the need to disable electrical receivers. The convergence of theoretical calculations and experimental data was shown.


Games ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 23
Author(s):  
Alexander Arguchintsev ◽  
Vasilisa Poplevko

This paper deals with an optimal control problem for a linear system of first-order hyperbolic equations with a function on the right-hand side determined from controlled bilinear ordinary differential equations. These ordinary differential equations are linear with respect to state functions with controlled coefficients. Such problems arise in the simulation of some processes of chemical technology and population dynamics. Normally, general optimal control methods are used for these problems because of bilinear ordinary differential equations. In this paper, the problem is reduced to an optimal control problem for a system of ordinary differential equations. The reduction is based on non-classic exact increment formulas for the cost-functional. This treatment allows to use a number of efficient optimal control methods for the problem. An example illustrates the approach.


Informatics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 30
Author(s):  
Mansoor Ahmed Soomro ◽  
Mohd Hizam-Hanafiah ◽  
Nor Liza Abdullah ◽  
Mohd Helmi Ali ◽  
Muhammad Shahar Jusoh

Industry 4.0 revolution, with its cutting-edge technologies, is an enabler for businesses, particularly in reducing the cost and improving the productivity. However, a large number of organizations are still too in their infancy to leverage the true potential of Industry 4.0 and its technologies. This paper takes a quantitative approach to reveal key insights from the companies that have implemented Industry 4.0 technologies. For this purpose, 238 technology companies in Malaysia were studied through a survey questionnaire. As technology companies are usually the first in line to adopt new technologies, they can be studied better as leaders in adopting the latest technologies. The findings of this descriptive study surfaced an array of insights in terms of Industry 4.0 readiness, Industry 4.0 technologies, leadership, strategy, and innovation. This research paper contributes by providing 10 key empirical insights on Industry 4.0 that can be utilized by managers to pace up their efforts towards digital transformation, and can help the policymakers in drafting the right policy to drive the digital revolution.


Author(s):  
Deep K. Datta-Ray

The history of Indian diplomacy conceptualises diplomacy racially—as invented by the West—and restrictively—to offence. This is ‘analytic-violence’ and it explains the berating of Indians for mimicking diplomacy incorrectly or unthinkingly, and the deleting, dismissing, or denigrating, of diplomatic practices contradicting history’s conception. To relieve history from these offences, a new method is presented, ‘Producer-Centred Research’ (PCR). Initiating with abduction, an insight into a problem—in this case Indian diplomacy’s compromised historicisation—PCR solves it by converting history’s racist rationality into ‘rationalities’. The plurality renders rationality one of many, permitting PCR’s searching for rationalities not as a function of rationality but robust practices explicable in producer’s terms. Doing so is exegesis. It reveals India’s nuclear diplomacy as unique, for being organised by defence, not offence. Moreover, offence’s premise of security as exceeding opponent’s hostility renders it chimerical for such a security is, paradoxically, reliant on expanding arsenals. Additionally, doing so is a response to opponents. This fragments sovereignty and abdicates control for one is dependent on opponent’s choices. Defence, however, does not instigate opponents and so really delivers security by minimising arsenals since offence is eschewed. Doing so is not a response to opponents and so maintains sovereignty and retains control by denying others the right to offense. The cost of defence is courage, for instance, choosing to live in the shadow of nuclear annihilation. Exegesis discloses Balakot as a shift from defence to offence, so to relieve the Bharatiya Janata Party’s (BJP) leadership of having to be courageous. The intensity of the intention to discard courage is apparent in the price the BJP paid. This included equating India with Pakistan, permitting it to escalate the conflict, and so imperiling all humanity in a manner beyond history.


2021 ◽  
Vol 11 (1) ◽  
pp. 193-199
Author(s):  
Rasha A. Al Salihi ◽  
Redvan Ghasemlounia

The building sector is playing an important part Major factor in any country's development. The Construct industry growth depends on Building project efficiency. Quality is one thing Important factor in construction industry success in this paper the problems of quality definition in the construction industry are discussed, analysis potential advantages of quality implementation and considers quality barriers to Building implementation. Many implementing obstacles. We identify recent patterns that could lead to the Invade barriers. However, the various building actors must Know that improvement is necessary for the construction industry to improve quality TQM is specifically designed to deliver excellence in customer satisfaction by continual improvement full participation of product and processes every person who is a part of dedication that product/process. It's an orchestrated approach enhancement. If implemented correctly, it will support the Company of construction to boost its efficiency.


Sign in / Sign up

Export Citation Format

Share Document