Effect of structure on wear resistance of cerium cast irons

1975 ◽  
Vol 17 (4) ◽  
pp. 351-353 ◽  
Author(s):  
M. E. Drits ◽  
T. A. Pronikova
Keyword(s):  
Wear Resistance ◽  
Cast Irons ◽  
Effect Of Structure

scholarly journals The Joint Effects of Nitriding and Parameters Related to the Destabilisation of Austenite on Wear Resistance in White Cast Iron with 25% Cr

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 85
Author(s):  
Alejandro González-Pociño ◽  
Florentino Alvarez-Antolin ◽  
Juan Asensio-Lozano
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
White Cast Iron ◽  
Nitrided Layer ◽  
Erosive Wear ◽  
Air Cooling ◽  
Cast Irons ◽  
Eutectic Carbides ◽  
Noticeable Increase ◽  
Ionic Nitriding

In this article, the effects of an ionic nitriding treatment are analysed, together with deliberate variation of different thermal parameters associated with the destabilisation of austenite, on erosive wear resistance of white cast irons with 25% Cr. The methodology followed in this research was an experimental design, where six factors were analyzed by performing eight experiments. The thickness of the nitrided layer is much smaller than in white cast iron with lower percentages in Cr, never reaching 20 microns. The nitriding treatment entails considerable softening of the material underneath the nitriding layer. This softening behaviour becomes partially inhibited when the destabilisation temperature of austenite is 1100 °C and dwell times at such temperature are prolonged. This temperature seems to play a significant role in the solubilization of non-equilibrium eutectic carbides, formed during industrial solidification. The nitriding treatment leads to additional hardening, which, in these cases, favours a second destabilisation of austenite, with additional precipitation of secondary carbides and the transformation of retained austenite into martensite. Despite softening of the material, the nitriding treatment, together with air-cooling after destabilisation of the austenite, allows a noticeable increase in resistance to erosive wear.

scholarly journals Application of the optimally alloyed cast irons in order to increase the durability and to ensure the cost reduction of mining and metallurgical products

2021 ◽  
Vol 303 ◽  
pp. 01005
Author(s):  
Dmitry Lubyanoi ◽  
Evgeny Pudov ◽  
Evgeny Kuzin ◽  
Olga Semenova
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
Operational Reliability ◽  
Cast Irons ◽  
Metallurgical Production ◽  
Alloyed Cast ◽  
Alloyed Cast Iron ◽  
And Performance ◽  
Working Bodies ◽  
The Cost

The article shows the relevance of the use of alloyed cast iron in mining and metallurgical engineering. The article discusses the technologies for producing naturally alloyed cast iron. For working bodies and friction units of mining machines, such as pumps, coal pumps, hydrocyclones, crushers and mills. The main type of wear for them is abrasive. To increase the wear resistance of cast iron the production of cast iron has not been sufficiently studied yet. Although the use of cast iron in a complex alloyed with manganese, silicon, chromium, titanium and vanadium has been studied. The article studies the influence of manganese, titanium and vanadium on the mechanical properties and performance of machine parts and products of mining and metallurgical production in contact with high-temperature and highly abrasive media. The rational content of titanium and vanadium in gray cast irons is established in the range of 0.05-0.1%, which ensures their heat resistance and increases their wear resistance. The content of these elements can be increased to 0.07-0.12%. Bushings made of this cast iron have the required wear resistance and can increase the operational reliability of the equipment in the conditions of mining and metallurgical production. They also replace non-ferrous metals, as well as products obtained by powder metallurgy methods.

scholarly journals The use of nitriding to enhance wear resistance of cast irons

2013 ◽  
Author(s):  
Z. Yang ◽  
D. O. Northwood ◽  
X. Sun ◽  
R. Lumbreras ◽  
G. C. Barber ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Cast Irons ◽  
Enhance Wear Resistance

Effect of the Morphology, Size, Distribution and Homogeneity of Carbides and Matrix on Wear Resistance in High Cr-Alloys White Cast Iron

2021 ◽  
Vol 1016 ◽  
pp. 56-62
Author(s):  
Carlos Camurri ◽  
Jasmín Maril ◽  
Eric Romero
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
White Cast Iron ◽  
Wear Behavior ◽  
Hardness Test ◽  
Mining Equipment ◽  
Cast Irons ◽  
Loss Of Mass ◽  
Ultimate Purpose ◽  
Wear Tests

The aim of this work was to study the wear behavior of high-chromium white cast iron of families ASTM A-532 II (B, D) and III A, used in mining equipment, in order to establish relationships between the wear resistance, hardness and microstructure of the alloys, with the ultimate purpose of predicting their resistance to abrasion. Samples from these cast irons were subjected to mechanical wear tests by rotating drum, then their micro/macro hardness was measured and microstructure analyzed by optical and scanning electron microscopy .It was found that when the macroscopic hardness differences were significant there was a strong correlation between the hardness and the loss of mass due to abrasion-impact wear. By contrast, when the alloys had similar hardness, the wear resistance was determined by morphology, size, and the distribution and connectivity of carbides and matrix and therefore was not predictable by an only simple hardness test.

Modifying of the Surface of Products from Cast Iron as the Element of Production Modernization

2020 ◽  
Vol 299 ◽  
pp. 588-593
Author(s):  
Nataliia Vodolazskaya ◽  
Olga Sharaya
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
Saturation Temperature ◽  
Thermochemical Treatment ◽  
Structural Condition ◽  
Surface Wear ◽  
Layer Depth ◽  
Cast Irons ◽  
Process Duration ◽  
Surface Impregnation

The way of solving the problem of surface wear of products from cast iron due to development of technological processes of its strengthening treatment is offered in this article. Receiving the hardened skins is reached by purposeful formation of the set structural condition of metal by methods of surface impregnation, i.e., modifying. Results of researches on thermochemical treatment of cast irons of grades EN-GJL-250, EN-JS1060 are presented The micro-structural analysis showed that with rising the saturation temperature and increasing the process duration the layer depth cartbonitration increases. Studying the samples for wear resistance carried out on stand ММ 295 showed that for grade EN-GJL-250 it increased 2,2 times, and for grade EN-JS1060 – 3 times as compared to the initial (non-modified) state. Experimental-industrial tests of products of cast iron (model accessory, parts of homogenizing pumps) after carbonitration permitted to state 2-4 times of its surface.

Effect of structure of the wear resistance of white cast iron

1968 ◽  
Vol 10 (11) ◽  
pp. 895-898 ◽  
Author(s):  
M. E. Garber ◽  
L. I. Levi ◽  
E. V. Rozhkova ◽  
I. I. Tsypin
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
White Cast Iron ◽  
Effect Of Structure
Sign in / Sign up

Export Citation Format

Share Document