Corrosion of nickel in sodium sulphate-sodium chloride melts. Part I

1978 ◽  
Vol 8 (2) ◽  
pp. 145-160 ◽  
Author(s):  
C. A. C. Sequeira ◽  
M. G. Hocking
Keyword(s):  
Sodium Chloride ◽  
Sodium Sulphate ◽  
Chloride Melts

Salt effect in hydrolysis of 3-acyl-1,3-diphenyltriazenes

1981 ◽  
Vol 46 (12) ◽  
pp. 3104-3109 ◽  
Author(s):  
Miroslav Ludwig ◽  
Oldřich Pytela ◽  
Miroslav Večeřa
Keyword(s):  
Sodium Chloride ◽  
Temperature Dependence ◽  
Potassium Chloride ◽  
Rate Constants ◽  
Zinc Sulphate ◽  
Salt Effect ◽  
Sodium Sulphate ◽  
Potassium Sulphate ◽  
Lithium Sulphate ◽  
Hydrolysis Of

Rate constants of non-catalyzed hydrolysis of 3-acetyl-1,3-diphenyltriazene (I) and 3-(N-methylcarbamoyl)-1,3-diphenyltriazene (II) have been measured in the presence of salts (ammonium chloride, potassium chloride, lithium chloride, sodium chloride and bromide, ammonium sulphate, potassium sulphate, lithium sulphate, sodium sulphate and zinc sulphate) within broad concentration ranges. Temperature dependence of the hydrolysis of the substrates studied has been measured in the presence of lithium sulphate within temperature range 20° to 55 °C. The results obtained have been interpreted by mechanisms of hydrolysis of the studied substances.

VIII.—The Stability of Suspensions. I. The Rate of Sedimentation of Kaolin Suspensions by Salts at Varying Hydrogen Ion Concentrations

1926 ◽  
Vol 45 (1) ◽  
pp. 59-70 ◽  
Author(s):  
William Ogilvy Kermack ◽  
William Turner Horace Williamson
Keyword(s):  
Sodium Chloride ◽  
Acid Solution ◽  
Alkaline Solution ◽  
Calcium Sulphate ◽  
Sodium Sulphate ◽  
Aluminium Chloride ◽  
Monocalcium Phosphate ◽  
Sodium Hydrogen Phosphate ◽  
Rate Of Sedimentation ◽  
The Stability

Summary1. The rates of sedimentation of a kaolin suspension in presence of varying concentrations of a salt (sodium chloride, potassium chloride, sodium sulphate, di-sodium hydrogen phosphate, sodium citrate, calcium chloride, calcium sulphate, monocalcium phosphate, “superphosphate”, aluminium chloride, ferric chloride or lanthanum chloride) have been compared at various pH values. Abnormal results are obtained with sodium chloride, monocalcium phosphate, aluminium, ferric and lanthanum chlorides.2. Sodium chloride increases the rate of sedimentation in alkaline solution, but actually inhibits it in acid solution.3. In concentrations of monocalcium phosphate above 0·06 per cent, abnormal sedimentation in alkaline solution takes place, with the result that it is much more complete than at the corresponding concentrations in acid solution.4. In acid solution the tervalent ions, aluminium, ferric and lanthanum have little effect, but a zone of very marked flocculation occurs at pH 7–8. This zone separates a region within which the unsedimented particles are negatively charged from a region within which they are positively charged.

Hot Corrosion of Nimonic 105 in Sodium Sulfate-Sodium Chloride Melts

CORROSION ◽  
1981 ◽  
Vol 37 (7) ◽  
pp. 392-407 ◽  
Author(s):  
C. A. C. Sequeira ◽  
M. G. Hocking
Keyword(s):  
Sodium Chloride ◽  
Corrosion Behavior ◽  
Analytical Methods ◽  
Sodium Sulfate ◽  
Hot Corrosion ◽  
Corrosion Potential ◽  
Free Corrosion Potential ◽  
Chloride Melts ◽  
Ni Alloy ◽  
Potential Decay

Abstract The corrosion behavior of Nimonic 105 in molten Na2SO4, NaCl, and mixtures of these two salts, at 900 C, in laboratory air and under O2 + SO2/SO3 atmospheres has been evaluated by potentiodynamic, potential decay, and free corrosion potential measurements. In addition, the corrosion products were examined using several electron-optical techniques, and by other analytical methods. Pure Na2SO4 in air did not seem to be very corrosive towards Nimonic 105. Addition of NaCl to the molten Na2SO4 resulted in increased dissolution of Nimonic 105, which was in general nonuniform, alloy constituents nickel and cobalt dissolving more than others. Evidence of internal attack and enhancement of dissolution of the Ni alloy by SO3 was significant only when the corrosion conditions were prolonged. In pure NaCl, catastrophic corrosion occurs, which has been attributed to the depletion, dissolution, and vaporization of some alloy species.

Response of Bean Plants to Sodium Chloride and Sodium Sulphate Salinization12

1971 ◽  
Vol 35 (4) ◽  
pp. 837-847 ◽  
Author(s):  
A. MEIRI ◽  
JOSEPHINE KAMBUROFF ◽  
ALEXANDRA POLJAKOFF-MAYBER
Keyword(s):  
Sodium Chloride ◽  
Sodium Sulphate ◽  
Bean Plants
Sign in / Sign up

Export Citation Format

Share Document