Methods of calculating and estimating the load-bearing capacity and mass perfection of structures of composite materials

1990 ◽  
Vol 25 (6) ◽  
pp. 772-783
Author(s):  
A. A. Filipenko
Keyword(s):  
Composite Materials ◽  
Bearing Capacity ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Mass Perfection

scholarly journals Strengthening of the wooden structures

2020 ◽  
Vol 18 (3) ◽  
pp. 017-028
Author(s):  
Szymon Ślósarz
Keyword(s):  
Composite Materials ◽  
Bearing Capacity ◽  
Operating Conditions ◽  
Review Of The Literature ◽  
Wood Degradation ◽  
Load Bearing Capacity ◽  
Traditional Methods ◽  
Load Bearing ◽  
Modern Methods ◽  
Wooden Structures

The paper is a review of the literature on the strengthening of wooden structures. The strengthening methods are classified according to their purpose and specifics. The article deals with both traditional methods commonly used and modern methods involving the use of composite materials. The paper also includes description of studies on various strengthening methods as well as the presentation of their results. The author also refers to the causes of the loss of load bearing capacity, causes of wood degradation and wooden structures durability in relation to operating conditions.

Study on Strengthening Glued-Laminated Timber with Aramid Cords and Properties of Composite Materials

2012 ◽  
Vol 583 ◽  
pp. 142-145 ◽  
Author(s):  
Marlena Rajczyk ◽  
Damian Jończyk
Keyword(s):  
Composite Materials ◽  
Numerical Analysis ◽  
Bearing Capacity ◽  
Normal Stress ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Reinforced Beams ◽  
Glued Laminated Timber

This paper presents method of strengthening glued-laminated timber with aramid cords. In order to estimate the increase in load-bearing capacity, numerical analysis was carried out on three beams: unreinforced; reinforced with one layer of aramid cords; and reinforced with two layers of aramid cords. A preliminary numerical analysis showed a reduction of deflections of reinforced beams by about 11 to 14 % and a reduction of 19 to 25 % of normal stress.

Increased load bearing capacity of mechanically joined FRP/metal joints using a pin structured auxiliary joining element

2020 ◽  
Vol 62 (1) ◽  
pp. 55-60
Author(s):  
Per Heyser ◽  
Vadim Sartisson ◽  
Gerson Meschut ◽  
Marcel Droß ◽  
Klaus Dröder
Keyword(s):  
Bearing Capacity ◽  
Load Bearing Capacity ◽  
Load Bearing

Load-Bearing Capacity of Direct Inlay-Retained Fibre-reinforced Composite Fixed Partial Dentures with Different Cross-Sectional Pontic Design

2017 ◽  
Vol 68 (1) ◽  
pp. 94-100
Author(s):  
Oana Tanculescu ◽  
Adrian Doloca ◽  
Raluca Maria Vieriu ◽  
Florentina Mocanu ◽  
Gabriela Ifteni ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Fracture Pattern ◽  
Load Bearing Capacity ◽  
Cross Sectional ◽  
Load Bearing ◽  
Reinforced Composite ◽  
Polyethylene Fibre

The load-bearing capacity and fracture pattern of direct inlay-retained FRC FDPs with two different cross-sectional designs of the ponticwere tested. The aim of the study was to evaluate a new fibre disposition. Two types of composites, Filtek Bulk Fill Posterior Restorative and Filtek Z250 (3M/ESPE, St. Paul, MN, USA), and one braided polyethylene fibre, Construct (Kerr, USA) were used. The results of the study suggested that the new tested disposition of the fibres prevented in some extend the delamination of the composite on buccal and facial sides of the pontic and increased the load-bearing capacity of the bridges.

scholarly journals The energy absorption behavior of novel composite sandwich structures reinforced with trapezoidal latticed webs

2021 ◽  
Vol 60 (1) ◽  
pp. 503-518
Author(s):  
Juan Han ◽  
Lu Zhu ◽  
Hai Fang ◽  
Jian Wang ◽  
Peng Wu
Keyword(s):  
Bearing Capacity ◽  
Energy Absorption ◽  
Sandwich Structure ◽  
Ultimate Load ◽  
Sandwich Structures ◽  
Elastic Displacement ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Composite Sandwich ◽  
Composite Sandwich Structures

Abstract This article proposed an innovative composite sandwich structure reinforced with trapezoidal latticed webs with angles of 45°, 60° and 75°. Four specimens were conducted according to quasi-static compression methods to investigate the compressive behavior of the novel composite structures. The experimental results indicated that the specimen with 45° trapezoidal latticed webs showed the most excellent energy absorption ability, which was about 2.5 times of the structures with vertical latticed webs. Compared to the traditional composite sandwich structure, the elastic displacement and ultimate load-bearing capacity of the specimen with 45° trapezoidal latticed webs were increased by 624.1 and 439.8%, respectively. Numerical analysis of the composite sandwich structures was carried out by using a nonlinear explicit finite element (FE) software ANSYS/LS-DYNA. The influence of the thickness of face sheets, lattice webs and foam density on the elastic ultimate load-bearing capacity, the elastic displacement and initial stiffness was analyzed. This innovative composite bumper device for bridge pier protection against ship collision was simulated to verify its performance. The results showed that the peak impact force of the composite anti-collision device with 45° trapezoidal latticed webs would be reduced by 17.3%, and the time duration will be prolonged by about 31.1%.

Sign in / Sign up

Export Citation Format

Share Document