Effect of surface-treated glass fibres on the dynamic behavior of fibre-reinforced composites

1994 ◽  
Vol 29 (5) ◽  
pp. 429-433 ◽  
Author(s):  
A. K. Bledzki ◽  
G. Wacker ◽  
H. Frenzel
Keyword(s):  
Dynamic Behavior ◽  
Reinforced Composites ◽  
Glass Fibres ◽  
Fibre Reinforced Composites ◽  
Effect Of Surface

The Influence of Processing Additives on the Properties of Glass-fibre-reinforced Composites Based on Biobased Polyamide 1010

2017 ◽  
Vol 44 (7) ◽  
pp. 43-48 ◽  
Author(s):  
A.A. Nikiforov ◽  
S.I. Vol'fson ◽  
N.A. Okhotina ◽  
R. Rinberg ◽  
L. Kroll
Keyword(s):  
Glass Fibre ◽  
Reinforced Composites ◽  
Glass Fibres ◽  
Glass Fibre Reinforced ◽  
Glass Fibre Reinforced Composites ◽  
Polyamide 1010 ◽  
Fibre Reinforced Composites ◽  
Properties Of Composites

The results of investigating the influence of processing additives from a group of lubricants on the degree of comminution of glass fibres during extrusion and the properties of composites based on biobased polyamide 1010 with different degrees of filling with chopped glass fibre are presented.

Effect of Surface Treatment on the Mechanical Properties of Banana-Glass Fibre Hybrid Composites

2014 ◽  
Vol 591 ◽  
pp. 7-10 ◽  
Author(s):  
V. Santhanam ◽  
M. Chandrasekaran
Keyword(s):  
Mechanical Properties ◽  
Glass Fibre ◽  
Synthetic Fibre ◽  
Epoxy Polymer ◽  
Hybrid Composites ◽  
Alkali Treatment ◽  
Natural Fibre ◽  
Reinforced Composites ◽  
Fibre Reinforced Composites ◽  
Effect Of Surface

Natural fibre reinforced composites have attracted the attention of research community mainly because they are turning out to be an alternative to synthetic fibre. Various natural fibres such as jute, sisal, palm, coir and banana are used as reinforcements. In this paper, banana fibres and glass fibres have been used as reinforcement. Hybrid epoxy polymer composite was fabricated using chopped banana/glass fibre and the effect of alkali treatment was also studied. It is found that the alkali treatment improved the mechanical properties of the composite.

Polypropylene-cellulose Innovative Compounding Technology

2012 ◽  
Vol 3 (1) ◽  
pp. 27-32
Author(s):  
L. Sobczak ◽  
A. Limper ◽  
H. Keuter ◽  
K. Fischer ◽  
A. Haider
Keyword(s):  
Thermal Energy ◽  
Energy Recovery ◽  
Natural Fibre ◽  
Reinforced Composites ◽  
Lightweight Construction ◽  
Glass Fibres ◽  
Fibre Reinforced Composites

Lightweight construction and recyclability are essential factors when it comes to meeting environmental targets. Natural fibre-reinforced composites (NFCs) have an important role to play here. The density of natural fibre materials is up to 50% lower than that of the reinforcing fibres traditionally used for plastics, such as glass fibres, and as well as being fully recyclable the composites offer 100% thermal energy recovery.

scholarly journals Resizing Approach to Increase the Viability of Recycled Fibre-Reinforced Composites

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5773
Author(s):  
Vsevolod Matrenichev ◽  
Maria Clara Lessa Belone ◽  
Sarianna Palola ◽  
Pekka Laurikainen ◽  
Essi Sarlin
Keyword(s):  
Tensile Properties ◽  
Batch Process ◽  
Reinforced Composites ◽  
Carbon Fibres ◽  
Recycled Glass ◽  
Glass Fibres ◽  
Recycled Fibres ◽  
Processing Properties ◽  
The Impact ◽  
Fibre Reinforced Composites

Most recycling methods remove the essential sizing from reinforcing fibres, and many studies indicate the importance of applying sizing on recycled fibres, a process we will denote here as resizing. Recycled fibres are not continuous, which dissociates their sizing and composite lay-up processes from virgin fibres. In this study, commercial polypropylene and polyurethane-based sizing formulations with an aminosilane coupling agent were used to resize recycled glass and carbon fibres. The impact of sizing concentration and batch process variables on the tensile properties of fibre-reinforced polypropylene and polyamide composites were investigated. Resized fibres were characterized with thermal analysis, infrared spectroscopy and electron microscopy, and the tensile properties of the composites were analysed to confirm the achievable level of performance. For glass fibres, an optimal mass fraction of sizing on the fibres was found, as an excess amount of film former has a plasticising effect. For recycled carbon fibres, the sizing had little effect on the mechanical properties but led to significant improvement of handling and post-processing properties. A comparison between experimental results and theoretical prediction using the Halpin-Tsai model showed up to 81% reinforcing efficiency for glass fibres and up to 74% for carbon fibres.

Report and discussion on “The development of fibre reinforced composites for gas turbines”

1969 ◽  
Vol 48 (10) ◽  
pp. 454
Author(s):  
H.E. Gresham ◽  
Eric Mensforth ◽  
L.R. Beesley ◽  
D. Wilkinson ◽  
R.E. Mills ◽  
...  
Keyword(s):  
Gas Turbines ◽  
Reinforced Composites ◽  
Fibre Reinforced Composites
Sign in / Sign up

Export Citation Format

Share Document