scholarly journals Spatial information capacity of compound eyes

1977 ◽  
Vol 116 (2) ◽  
pp. 183-207 ◽  
Author(s):  
Allan W. Snyder ◽  
Doekele G. Stavenga ◽  
Simon B. Laughlin
Keyword(s):  
Spatial Information ◽  
Information Capacity ◽  
Compound Eyes

Electrophysiological response of Dendroctonus pseudotsugae and Ips paraconfusus (Coleoptera: Scolytidae) to selected wavelength regions of the visible spectrum

1982 ◽  
Vol 60 (9) ◽  
pp. 2180-2189 ◽  
Author(s):  
L. J. Groberman ◽  
J. H. Borden
Keyword(s):  
Fiber Optics ◽  
Spatial Information ◽  
Spectral Response ◽  
Visible Spectrum ◽  
Ips Paraconfusus ◽  
Compound Eyes ◽  
Response Curves ◽  
Dendroctonus Pseudotsugae ◽  
Electrophysiological Response ◽  
Sensitivity Curves

Electroretinograms (ERGs) were recorded from the compound eyes of both sexes of Dendroctonus pseudotsugae Hopkins and Ips paraconfusus (Lanier). Light stimuli between 400 and 650 nm were delivered to the compound eyes through a monochromator connected to a fiber-optics and lens light-delivery system. Stimulus intensity was regulated with neutral density filters. The averaged spectral response curves were similar for both species and sexes. The spectral sensitivity curves disclosed two sensitivity maxima, one in the blue region (450 nm) and one in the green region (510 to 530 nm). These correspond well with behavioural data on scolytids and with response peaks reported in other insects and provide evidence that the scolytid visual system consists of two receptor types. The blue receptors are probably used in navigation during the initial stages of the dispersal flight and the green receptors for the detection of spatial information during host selection.

Practical Picture Processing

1974 ◽  
Vol 32 ◽  
pp. 338-339
Author(s):  
T. A. Welton
Keyword(s):  
Radiation Damage ◽  
Coherence Length ◽  
Spatial Information ◽  
State Of The Art ◽  
Coherent Radiation ◽  
The State ◽  
Energy Spread ◽  
Electron Micrograph ◽  
Picture Processing ◽  
Molecular Skeleton

Various authors have emphasized the spatial information resident in an electron micrograph taken with adequately coherent radiation. In view of the completion of at least one such instrument, this opportunity is taken to summarize the state of the art of processing such micrographs. We use the usual symbols for the aberration coefficients, and supplement these with £ and 6 for the transverse coherence length and the fractional energy spread respectively. He also assume a weak, biologically interesting sample, with principal interest lying in the molecular skeleton remaining after obvious hydrogen loss and other radiation damage has occurred.

3-D optical transfer in excitation field synthesis microscopes

1995 ◽  
Vol 53 ◽  
pp. 64-65
Author(s):  
Vijay Krishnamurthi ◽  
Brent Bailey ◽  
Frederick Lanni
Keyword(s):  
Standing Wave ◽  
Spatial Information ◽  
3D Structure ◽  
Complete Recovery ◽  
Weighting Factor ◽  
Optical Transfer Function ◽  
Excitation Field ◽  
Optical Transfer ◽  
Set Up ◽  
Focus Plane

Excitation field synthesis (EFS) refers to the use of an interference optical system in a direct-imaging microscope to improve 3D resolution by axially-selective excitation of fluorescence within a specimen. The excitation field can be thought of as a weighting factor for the point-spread function (PSF) of the microscope, so that the optical transfer function (OTF) gets expanded by convolution with the Fourier transform of the field intensity. The simplest EFS system is the standing-wave fluorescence microscope, in which an axially-periodic excitation field is set up through the specimen by interference of a pair of collimated, coherent, s-polarized beams that enter the specimen from opposite sides at matching angles. In this case, spatial information about the object is recovered in the central OTF passband, plus two symmetric, axially-shifted sidebands. Gaps between these bands represent "lost" information about the 3D structure of the object. Because the sideband shift is equal to the spatial frequency of the standing-wave (SW) field, more complete recovery of information is possible by superposition of fields having different periods. When all of the fields have an antinode at a common plane (set to be coincident with the in-focus plane), the "synthesized" field is peaked in a narrow infocus zone.

Use of EDS mapping to characterize thermochemical stability of fibers in intermetallic matrix composites

1992 ◽  
Vol 50 (1) ◽  
pp. 160-161
Author(s):  
John R. Porter
Keyword(s):  
Spatial Information ◽  
Beam Current ◽  
Fiber Types ◽  
Ceramic Fibers ◽  
Dye Transfer ◽  
Science Center ◽  
Commercial Development ◽  
Nih Image ◽  
Intermetallic Matrix Composites ◽  
Thermochemical Stability

New ceramic fibers, currently in various stages of commercial development, have been consolidated in intermetallic matrices such as γ-TiAl and FeAl. Fiber types include SiC, TiB2 and polycrystalline and single crystal Al2O3. This work required the development of techniques to characterize the thermochemical stability of these fibers in different matrices.SEM/EDS elemental mapping was used for this work. To obtain qualitative compositional/spatial information, the best realistically achievable counting statistics were required. We established that 128 × 128 maps, acquired with a 20 KeV accelerating voltage, 3 sec. live time per pixel (total mapping time, 18 h) and with beam current adjusted to give 30% dead time, provided adequate image quality at a magnification of 800X. The maps were acquired, with backgrounds subtracted, using a Noran TN 5500 EDS system. The images and maps were transferred to a Macintosh and converted into TIFF files using either TIFF Maker, or TNtolMAGE, a Microsoft QuickBASIC program developed at the Science Center. From TIFF files, images and maps were opened in either NIH Image or Adobe Photoshop for processing and analysis and printed from Microsoft Powerpoint on a Kodak XL7700 dye transfer image printer.

Differentiation Processes of the Ocellar Retina of the Honeybee (Apis Mellifera L.)

1990 ◽  
Vol 48 (3) ◽  
pp. 430-431
Author(s):  
Maria Anna Pabst
Keyword(s):  
Apis Mellifera ◽  
Distal Part ◽  
Cell Layer ◽  
Single Layer ◽  
Photoreceptor Cells ◽  
Distal Segment ◽  
Compound Eyes ◽  
Thin Sections ◽  
Ultrastructural Studies ◽  
Adult Worker

In addition to the compound eyes, honeybees have three dorsal ocelli on the vertex of the head. Each ocellus has about 800 elongated photoreceptor cells. They are paired and the distal segment of each pair bears densely packed microvilli forming together a platelike fused rhabdom. Beneath a common cuticular lens a single layer of corneagenous cells is present.Ultrastructural studies were made of the retina of praepupae, different pupal stages and adult worker bees by thin sections and freeze-etch preparations. In praepupae the ocellar anlage consists of a conical group of epidermal cells that differentiate to photoreceptor cells, glial cells and corneagenous cells. Some photoreceptor cells are already paired and show disarrayed microvilli with circularly ordered filaments inside. In ocelli of 2-day-old pupae, when a retinogenous and a lentinogenous cell layer can be clearly distinguished, cell membranes of the distal part of two photoreceptor cells begin to interdigitate with each other and so start to form the definitive microvilli. At the beginning the microvilli often occupy the whole width of the developing rhabdom (Fig. 1).

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Characterisation of multilayer materials using a position-sensitive atom probe

1990 ◽  
Vol 48 (4) ◽  
pp. 624-625
Author(s):  
RAD Mackenzie ◽  
G D W Smith ◽  
A. Cerezo ◽  
J A Liddle ◽  
CRM Grovenor ◽  
...  
Keyword(s):  
Quantum Well ◽  
Quantum Wells ◽  
Spatial Information ◽  
Chemical Vapour ◽  
Atom Probe ◽  
Organic Chemical ◽  
Growth Stages ◽  
Multiple Quantum ◽  
Quartz Wool ◽  
Position Sensitive

The position sensitive atom probe (POSAP), described briefly elsewhere in these proceedings, permits both chemical and spatial information in three dimensions to be recorded from a small volume of material. This technique is particularly applicable to situations where there are fine scale variations in composition present in the material under investigation. We report the application of the POSAP to the characterisation of semiconductor multiple quantum wells and metallic multilayers.The application of devices prepared from quantum well materials depends on the ability to accurately control both the quantum well composition and the quality of the interfaces between the well and barrier layers. A series of metal organic chemical vapour deposition (MOCVD) grown GaInAs-InP quantum wells were examined after being prepared under three different growth conditions. These samples were observed using the POSAP in order to study both the composition of the wells and the interface morphology. The first set of wells examined were prepared in a conventional reactor to which a quartz wool baffle had been added to promote gas intermixing. The effect of this was to hold a volume of gas within the chamber between growth stages, leading to a structure where the wells had a composition of GalnAsP lattice matched to the InP barriers, and where the interfaces were very indistinct. A POSAP image showing a well in this sample is shown in figure 1. The second set of wells were grown in the same reactor but with the quartz wool baffle removed. This set of wells were much better defined, as can be seen in figure 2, and the wells were much closer to the intended composition, but still with measurable levels of phosphorus. The final set of wells examined were prepared in a reactor where the design had the effect of minimizing the recirculating volume of gas. In this case there was again further improvement in the well quality. It also appears that the left hand side of the well in figure 2 is more abrupt than the right hand side, indicating that the switchover at this interface from barrier to well growth is more abrupt than the switchover at the other interface.

Phonological and Spatial Processing Abilities in Language- and Reading-Impaired Children

1988 ◽  
Vol 53 (3) ◽  
pp. 316-327 ◽  
Author(s):  
Alan G. Kamhi ◽  
Hugh W. Catts ◽  
Daria Mauer ◽  
Kenn Apel ◽  
Betholyn F. Gentry
Keyword(s):  
Phonological Processing ◽  
Spatial Information ◽  
Normal Children ◽  
Language Impaired ◽  
Word Repetition ◽  
Paper Folding ◽  
Syllable Segmentation ◽  
Processing Abilities ◽  
Impaired Children ◽  
Better Than

In the present study, we further examined (see Kamhi & Catts, 1986) the phonological processing abilities of language-impaired (LI) and reading-impaired (RI) children. We also evaluated these children's ability to process spatial information. Subjects were 10 LI, 10 RI, and 10 normal children between the ages of 6:8 and 8:10 years. Each subject was administered eight tasks: four word repetition tasks (monosyllabic, monosyllabic presented in noise, three-item, and multisyllabic), rapid naming, syllable segmentation, paper folding, and form completion. The normal children performed significantly better than both the LI and RI children on all but two tasks: syllable segmentation and repeating words presented in noise. The LI and RI children performed comparably on every task with the exception of the multisyllabic word repetition task. These findings were consistent with those from our previous study (Kamhi & Catts, 1986). The similarities and differences between LI and RI children are discussed.

Human Event-Related Potentials to Higher-Order Acoustic Spatial Changes

2002 ◽  
Vol 16 (2) ◽  
pp. 114-118 ◽  
Author(s):  
Timo Ruusuvirta ◽  
Heikki Hämäläinen
Keyword(s):  
Working Memory ◽  
Mismatch Negativity ◽  
Spatial Information ◽  
Free Field ◽  
Event Related Potentials ◽  
Negative Polarity ◽  
Positive Polarity ◽  
Spatial Changes ◽  
Related Potentials ◽  
Human Event

Abstract Human event-related potentials (ERPs) to a tone continuously alternating between its two spatial loci of origin (middle-standards, left-standards), to repetitions of left-standards (oddball-deviants), and to the tones originally representing these repetitions presented alone (alone-deviants) were recorded in free-field conditions. During the recordings (Fz, Cz, Pz, M1, and M2 referenced to nose), the subjects watched a silent movie. Oddball-deviants elicited a spatially diffuse two-peaked deflection of positive polarity. It differed from a deflection elicited by left-standards and commenced earlier than a prominent deflection of negative polarity (N1) elicited by alone-deviants. The results are discussed in the context of the mismatch negativity (MMN) and previous findings of dissociation between spatial and non-spatial information in auditory working memory.

Sign in / Sign up

Export Citation Format

Share Document