Sintering process and properties of porous specimens of fibers of Kh18N9T steel with a nickel coating

1993 ◽  
Vol 32 (1) ◽  
pp. 39-40
Author(s):  
A. G. Kostornov ◽  
L. I. Chernyshev ◽  
N. E. Fedorova ◽  
A. A. Sotnik
Keyword(s):  
Nickel Coating ◽  
Sintering Process ◽  
Kh18n9t Steel

Behavior of the system of diamond particles with nanometer nickel coating at high pressures and temperatures in the sintering process

2005 ◽  
Vol 50 (7) ◽  
pp. 351-354 ◽  
Author(s):  
E. A. Ekimov ◽  
A. S. Ivanov ◽  
A. F. Pal’ ◽  
A. N. Ryabinkin ◽  
A. O. Serov ◽  
...  
Keyword(s):  
High Pressures ◽  
Nickel Coating ◽  
Sintering Process ◽  
Diamond Particles ◽  
High Pressures And Temperatures

Microstructural Study of Diamond Deformed Under High Pressure and Temperature

1985 ◽  
Vol 43 ◽  
pp. 230-231
Author(s):  
E. F. Koch
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Lattice Structure ◽  
Diamond Particle ◽  
Polycrystalline Diamond ◽  
Sintering Process ◽  
Ion Milling ◽  
Sintered Compact ◽  
Transmission Electron ◽  
High Pressure Sintering

Because of the extremely rigid lattice structure of diamond, generating new dislocations or moving existing dislocations in diamond by applying mechanical stress at ambient temperature is very difficult. Analysis of portions of diamonds deformed under bending stress at elevated temperature has shown that diamond deforms plastically under suitable conditions and that its primary slip systems are on the ﹛111﹜ planes. Plastic deformation in diamond is more commonly observed during the high temperature - high pressure sintering process used to make diamond compacts. The pressure and temperature conditions in the sintering presses are sufficiently high that many diamond grains in the sintered compact show deformed microtructures.In this report commercially available polycrystalline diamond discs for rock cutting applications were analyzed to study the deformation substructures in the diamond grains using transmission electron microscopy. An individual diamond particle can be plastically deformed in a high pressure apparatus at high temperature, but it is nearly impossible to prepare such a particle for TEM observation, since any medium in which the diamond is mounted wears away faster than the diamond during ion milling and the diamond is lost.

Fabrication and Mechanical Properties of ultra fine WC-6wt.%Co by Spark Plasma Sintering Process

2011 ◽  
Vol 49 (01) ◽  
pp. 40-45 ◽  
Author(s):  
Hyun-Kuk Park ◽  
Seung-Min Lee ◽  
Hee-Jun Youn ◽  
Ki-Sang Bang ◽  
Ik-Hyun Oh
Keyword(s):  
Mechanical Properties ◽  
Spark Plasma Sintering ◽  
Sintering Process ◽  
Plasma Sintering ◽  
Spark Plasma

Influence of the Zinc Sublayer Method Production and Heat Treatment on the Microhardness of the Composite Ni-Al2O3 Coating Deposited on the 5754 Aluminium Alloy

2014 ◽  
Vol 59 (1) ◽  
pp. 355-358
Author(s):  
M. Karaś ◽  
M. Nowak ◽  
M. Opyrchał ◽  
M. Bigaj ◽  
A. Najder
Keyword(s):  
Heat Treatment ◽  
Aluminium Alloy ◽  
Thermal Shock ◽  
Nickel Coating ◽  
Nickel Sulphate ◽  
Al2o3 Coating ◽  
Nickel Coatings ◽  
Watts Bath ◽  
Before And After ◽  
Zinc Interlayer

Abstract In this study, the effect of zinc interlayer on the adhesion of nickel coatings reinforced with micrometric Al2O3 particles was examined. Nickel coating was applied by electroplating on EN AW - 5754 aluminium alloy using Watts bath at a concentration of 150 g/l of nickel sulphate with the addition of 50 g/l of Al2O3. The influence of zinc intermediate coating deposited in single, double and triple layers on the adhesion of nickel coating to aluminium substrate was also studied. The adhesion was measured by the thermal shock technique in accordance with PN-EN ISO 2819. The microhardness of nickel coating before and after heat treatment was additionally tested. It was observed that the number of zinc interlayers applied does not significantly affect the adhesion of nickel which is determined by thermal shock. No defect that occurs after the test, such as delamination, blistering or peeling of the coating was registered. Microhardness of the nickel coatings depends on the heat treatment and the amount of zinc in the interlayer. For both single and double zinc interlayer, the microhardness of the nickel coating containing Al2O3 particles increased after heat treatment, but decreased when a triple zinc interlayer was applied.

Sign in / Sign up

Export Citation Format

Share Document